• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.308-311
• /
• 2005

[ $^{222}Rn\;and\;^{226}Ra$ ] in groundwater were determined simultaneously using a gamma-spectroscopy. A nitrogen flushing equipment has been used for elimination and stabilization of high and unstable background activity due to the radon and its progenies in counting shield and room. The aim of present work was to control the background activity for simultaneous measurement of radium$(^{226}Ra)$ and radon$(^{222}Rn)$ in groundwater using a gamma-spectrometry. Background activity was about 1.0dps and the standard deviation was about 50%, The background activity could be minimized using nitrogen flushing equipment in the range of 0.1 to 0.5 and the RSD was about 5% at the experimental condition. The detection limit of $^{222}Rn\;and\;^{226}Ra$ in groundwater was 0.5dps/L in the background control method. In most groundwater used in the work, radon activity was more than the detection limit. However, radium activity in some groundwater was less than the detection limit. If the low level radium in groundwater must be measured, preconcentration process such as concentration should be performed before measuring the groundwater.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권1호통권53호
• /
• pp.145-151
• /
• 2009

교량 계측시스템의 계측항목 중 거더 중앙부 처짐은 교량 상부구조의 대표적인 거동 특성이며, 중요한 상태평가 항목이다. 교량 계측시스템에서 교량 경간 중앙부 처짐에 대한 관리기준치를 설정하는 여러 가지 방법 중 도로교 설계기준의 처짐 제한치를 적용하는 경우도 있다. 그러나 도로교설계기준의 처짐 제한규정은 안전성 측면보다는 사용성 측면에서 검토되어 실제 교량에서 발생할 수 있는 위험상황에 대하여 어느 정도 안전을 보장하는지 판단하기 어렵다. 본 연구는 현재 교량 설계시 경간 중앙부 처짐의 사용성 검토 기준이고, 일부 교량 상시계측시스템의 경간 중앙부 관리기준치로 적용되고 있는 도로교설계기준의 처짐 제한치가 포함하고 있는 파괴(항복)에 대한 실질적인 안전율을 추정해 보고자 실내구조실험을 통하여 일반 철근콘크리트 거더의 안전율을 추정하였다.

• 산업기술연구
• /
• 제17권
• /
• pp.119-124
• /
• 1997

This thesis is an experimental research of shear behavioral characteristics and shear behavioral coefficient of weathered residual soil which is mostly contained in soil of Korea. Using the weathered residual soil from mountain near Kangwon National University, this experimental research were contained the physical properties of sample in term of the basic test method such as specific gravity, plastic and liquid limit, grain-size distribution, density and water content. Experimental results obtained from direct shear test sand triaxial compression tests show that according to step loading, linear strain and linear stress increase continually and angle of internal friction decreases just little according to incresing of water content in case of ignoring the cohesion, and angle of internal friction appears the maximum angle near a optimum moisture content in case of considering the cohesion.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1747-1755
• /
• 2008

Design of the reinforced roadbed thickness is concerned with safe operation of trains at specified levels of speed, axle load and tonnage. There are two methods for evaluating it. One is using an experimental equation and the other is using elastic theory with considering axle load, material properties of subsoils and allowable elastic settlement. Multi-layered theory is used to determine reinforced roadbed thickness by RTRI. Although their reinforced roadbed thickness is designed with an objective of achieving a minimum standard 2.5mm of settlement on the subgrade surface, it is hardly applied to real design. Li(1994) has suggested the experimental model which design approach is to limit plastic strain and deformations for the design period. It is worth due to adopting soil equivalent number of repeated load application. Moreover, it has been a more advanced method than existing design methods because including resilient modulus of subsoil beneath track, soil deviator stress caused by train axle loads and MGT. In this paper, it is analyzed under domestic track conditions to estimate the reinforced roadbed thickness with different soil types.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.245-256
• /
• 2019

The experimentally determined mechanical behavior of the material under the prescribed service conditions is the basis of advanced engineering optimum design. To allow experimental data on the behavior of the material considered, uniaxial stress tests were made. The aforementioned tests have enabled the determination of mechanical properties of material at different temperatures, then, the material's resistance to creep at various temperatures and stress levels, and finally, insight into the uniaxial high cyclic fatigue of the material under different applied stresses for prescribed stress ratio. Based on fatigue tests, using modified staircase method, fatigue limit was determined. All these data contributes the reliability of the use of material in mechanical structures. Data representing mechanical properties are shown in the form of engineering stress-strain diagrams; creep behavior is displayed in the form of creep curves while fatigue of the material is presented in the form of S-N (maximum applied stress versus number of the cycles to failure) curve. Material under consideration was 18CrNi8 (1.5920) steel. Ultimate tensile strength and yield strength at room temperature and at temperature of $600^{\circ}C$: [${\sigma}_{m,20/600}=(613/156)MPa$; ${\sigma}_{0.2,20/600}=(458/141)MPa$], as well as endurance (fatigue) limit at room temperature and stress ratio of R = -1 : (${\sigma}_{f,20,R=-1}=285.1MPa$).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.511-513
• /
• 2008

Since conventional analysis of LLC resonant converter has a limit to explain a practical operation of LLC Resonant Converter, LLC resonant converter designed by conventional analysis can not regulate output voltage in several conditions. To solve this problem, analysis and design of LLC resonant converter including parasitic components is proposed. Experimental results are shown to confirm the feasibility of the proposed method.

• 소성∙가공
• /
• 제3권1호
• /
• pp.110-119
• /
• 1994

In this paper, a new forming process of large-size forgings of converged nozzle-shape is developed by the experimental study using the incremental forging method and combined forming method. The development of the forming process is focused on the manufacturing of large-size forgings by the press with medium load capacity. Various related processes are proposed and modelling experiments using plasticine are carried out. Thus, the incremental forging method for expanding is recommanded from the study of formability and forming load, etc. The selected process is then subjected to modelling experiments of lead and the design parameters such as preform for final process, die-width of the upper die and reduction amount of each stroke are determined. In order to verify the effectiveness of the selected process, 1/7 scale prototype experiment of the real material is carried out. Forgings of converged nozzle shape can be produced by the developed process within the limit loads and with the simple tools.

• 대한기계학회논문집
• /
• 제9권6호
• /
• pp.777-787
• /
• 1985

본 논문에서는 스트레치 플랜징과 슈링크 플랜징에 대하여 각 공정에서의 성 형한계를 이론적으로 구하여 이를 실험과 비교검토함으로써 효과적인 성형한계예측 방 법을 개발하는데 주안점이 있다. 스트레치 플랜징의 경우는 Wang과 Wenner의 연구에 서 얻어진 결과를 이용하여 여기에 기본적인 네킹(Necking)이론을 적용하여 성형한계 를 구하도록 한다. 한편 슈링크 플랜징의 성형한계 해석을 위해서는 Wang과 Wenner 의 스트레치 플랜징에 대한 해석방법을 응용발전시켜 응력 및 변형도등을 계산하고 주 름현상해석을 위해서 Yu 및 Johnson이 도입했던 좌굴계수(Buckling Modulus)개념을 이 용하여 미소 각변위(angular displacement)동안 플랜지부에서 생기는 굽힘에너지와 소 성변형에너지를 비교하는 판별조건을 써서 슈링크 플랜징의 성형 한계를 해석하고자 한다.아울러 각 공정에서의 이론 해석결과들을 성형실험에서 얻어진 값들과 비교 검토하도록 한다.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.140-149
• /
• 2016

For visual measurement under dynamic scenarios, a zoom lens camera is more flexible than a fixed one. However, the challenges of distortion prediction within the whole focal range limit the widespread application of zoom lens cameras greatly. Thus, a novel sequential distortion correction method for a zoom lens camera is proposed in this study. In this paper, a distortion assessment method without coupling effect is depicted by an elaborated chessboard pattern. Then, the appropriate distortion correction model for a zoom lens camera is derived from the comparisons of some existing models and methods. To gain a rectified image at any zoom settings, a global distortion correction modeling method is developed with bundle adjustment. Based on some selected zoom settings, the optimized quadratic functions of distortion parameters are obtained from the global perspective. Using the proposed method, we can rectify all images from the calibrated zoom lens camera. Experimental results of different zoom lens cameras validate the feasibility and effectiveness of the proposed method.

• Structural Engineering and Mechanics
• /
• 제73권5호
• /
• pp.515-527
• /
• 2020

This paper presents a stress field approach for the shear capacity of stirrup-reinforced concrete beams that explicitly incorporates the contribution of principal tensile stresses in concrete. This formulation represents an extension of the variable strut inclination method adopted in the Eurocode 2. In this model, the stress fields in web concrete consist of principal compressive stresses inclined at an angle θ combined with principal tensile stresses oriented along a direction orthogonal to the former (the latter being typically neglected in other formulations). Three different failure mechanisms are identified, from which the strut inclination angle and the corresponding shear strength are determined through equilibrium principles and the static theorem of limit analysis, similar to the EC-2 approach. It is demonstrated that incorporating the contribution of principal tensile stresses of concrete slightly increases the ultimate inclination angle of the compression struts as well as the shear capacity of reinforced concrete beams. The proposed stress field approach improves the prediction of the shear strength in comparison with the Eurocode 2 model, in terms of both accuracy (mean) and precision (CoV), as demonstrated by a broad comparison with more than 200 published experimental results from the literature.