• 한국지반신소재학회논문집
• /
• 제8권3호
• /
• pp.17-23
• /
• 2009

보강사면안정 문제에 널리 이용되는 절편법은 사용이 간편하고 계산시간이 짧다는 장점이 있으나, 각 절편들 사이에 작용하는 힘에 대한 가정에 따라 여러 가지 방법으로 분류되며, 그 결과 또한 다르게 나오는 단점이 있다. 본 논문에서는 이러한 문제에 대한 해결방안의 하나로 제시된 수치해석을 이용한 사면의 안정해석기법인 강도감소법과 응력장을 이용한 안정해석법을 원리 및 적용성을 살펴보고 간단한 사례를 통한 특징을 고찰하였다.

• 대한토목학회논문집
• /
• 제12권1호
• /
• pp.187-196
• /
• 1992

본 연구에서는 편심 하중을 받는 기초의 지지력을 극한해석 상계법을 이용하여 산정하였다. 편심 하중이 작용하는 기초의 지지력을 산정하는 기존의 해석방법으로는 극한평형법을 이용한 Meyerhof 방법과 Saran 방법 등이 있으나, 극한해석법을 이용하여 해석하는 경우는 없다. 이에 본 연구에서는 극한해석 상계법을 이용하여 편심하중이 작용하는 기초의 지지력을 산정하였다. 극한해석 상계법으로 해석하는 경우, 적용하는 파괴메카니즘에 따라 그 결과가 달라지므로, 본 연구에서는 기존의 파괴메카니즘을 속도장 조건에 맞게 변형시킨 후, 극한해석 상계법을 적용하여 그 결과들을 상호 비교하였다. 그리고, 편심하중을 받는 기초 구조물의 지지력에 영향을 미치는 요소들을 연구하기 위하여 흙의 내부마찰각, 기초 바닥면의 마찰각, 편심량, 그리고 상재하중 등을 변화시켜 각 요소들이 기초의 지지력에 미치는 영향을 연구하였다.

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.187-195
• /
• 2023

Intensive rainfall during the summer season in Korea has triggered numerous devastating landslides outside of downtown in mountainous areas. The 2D slope stability analysis that is generally used for cut slopes and embankments is inadequate to model slope failure in mountainous areas. This paper presents a new 3D slope stability formulation using the global sliding vector in the limit equilibrium method, and it uses an ellipsoidal slip surface for static and quasi-static analyses. The slip surface's flexibility of the ellipsoid shape gives a lower FS than the spherical failure shape in the Fellenius, Bishop, and Janbu's simplified methods. The increasing sub-columns of each column tend to increase the FS and converge to a steady value. The symmetrical geometric conditions of the convex turning corners do not indicate symmetrical failure of the surface in 3D analysis. Pseudo-static analysis shows that the horizontal seismic force decreases the FS and increases the mass volume at the critical failure state. The stability index takes the FS and corresponding sliding mass into consideration to assess the potential risk of slope failure in complex mountainous terrain. It is a valuable parameter for selecting a vulnerable area and evaluating the overall risk of slope failure.

• 한국지반공학회논문집
• /
• 제20권3호
• /
• pp.85-96
• /
• 2004

본 연구는 점토층위의 모래지반에 위치하는 표면기초의 극한지지력에 대해 이론적으로 조사하였다. 실용적인 적용을 위하여 표면기초의 지지력에 관한 연구들에 대한 검토와 논의가 제시되며, 한계해석(Limit Analysis)의 운동학적 접근방법을 이용하여 정해의 극한 지지력이 계산되었다. 운동학적 해는 상한값이며 해의 정확성은 파괴메카니즘의 형상에 달려 있다. 이러한 방법은 설계도표를 만드는데 편리할 뿐만 아니라 물성치의 영향을 추정할 수 있다. 본 연구에서는 범용 유한요소해석 프로그램인 ABAQUS를 사용하여 탄소성 이론에 근거하여 극한지지력을 계산하였다. 운동학적 방범으로 계산된 결과와 유한요소 해석, 한계평형론에 근거한 몇몇 알려진 식들(Yamaguchi, Meyerhof와 Okamura 등)에 의한 결과를 비교하였다. 아울러, 운동학적 방법에 의한 제안식과 유한요소해석 결과와 한계평형해석 결과의 유효성에 대하여 검증하였다.

• 대한수학회보
• /
• 제56권3호
• /
• pp.757-777
• /
• 2019

In this paper, we study the convergence analysis of the sequences generated by the proximal point method for an infinite family of pseudo-monotone equilibrium problems in Banach spaces. We first prove the weak convergence of the generated sequence to a common solution of the infinite family of equilibrium problems with summable errors. Then, we show the strong convergence of the generated sequence to a common equilibrium point by some various additional assumptions. We also consider two variants for which we establish the strong convergence without any additional assumption. For both of them, each iteration consists of a proximal step followed by a computationally inexpensive step which ensures the strong convergence of the generated sequence. Also, for this two variants we are able to characterize the strong limit of the sequence: for the first variant it is the solution lying closest to an arbitrarily selected point, and for the second one it is the solution of the problem which lies closest to the initial iterate. Finally, we give a concrete example where the main results can be applied.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 가을 학술발표회 논문집
• /
• pp.63-68
• /
• 1993

Soil nailing is a method of reinforcing natural deposits of soil with passive inclusions, called nails, of steel or other materials. Its purpose is mainly to increase the tensile and shear strength of the soil mass. This method has been widely used during the last two decades to stabilize steep slopes in several countries (France, Germany, USA, Japan, etc.). The design methods that have been mostly used are Davis method, German method, and French method which are based on limit equilibrium approaches, and Juran method which utilizes the kinematical limit equilibrium design concept. This paper is focussed on the evaluation of the available design methods(especially, the France, Davis and German design methods) through comparison with each different assumption for the failure surface, the concept of failure mechanism and the definition of safety factor. The parametric study to identify the effects of design parameters on the overall factor of safety has also been conducted. By considering the results along with the associated assumptions which have been postulated in the several methods, the applicability of the method for a given soil and nail conditions has been evaluated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.483-490
• /
• 2002

This paper presents the results of a comparative study between FEM and LEM on slope stability analysis. For validation, factors of safety were compared between FEM and LEM. The results from the two methods were in good agreement suggesting that the FEM with the shear strength reduction method can be effectively used on slope stability analyses. A series of analysis were then performed using the FEM for various constitutive laws, slope angles, flow rules, and the finite element discretizations. Among the findings, the finite element method in conjunction with the shear strength reduction method can provide reasonable results in terms of factor of safety. Also revealed is that the results of FEM can be significantly affected by the way in which the type of constitutive law and flow rule are selected.

• Steel and Composite Structures
• /
• 제27권1호
• /
• pp.13-25
• /
• 2018

The main objective of this study is to develop a dual approach for geometrically nonlinear finite element analysis of plane truss structures. The geometric nonlinearity is considered using the Total Lagrangian formulation. The nonlinear solution is obtained by introducing and minimizing an objective function subjected to displacement-type constraints. The proposed method can fully trace the whole equilibrium path of geometrically nonlinear plane truss structures not only before the limit point but also after it. No stiffness matrix is used in the main approach and the solution is acquired only based on the direct classical stress-strain formulations. As a result, produced errors caused by linearization and approximation of the main equilibrium equation will be eliminated. The suggested algorithm can predict both pre- and post-buckling behavior of the steel plane truss structures as well as any arbitrary point of equilibrium path. In addition, an equilibrium path with multiple limit points and snap-back phenomenon can be followed in this approach. To demonstrate the accuracy, efficiency and robustness of the proposed procedure, numerical results of the suggested approach are compared with theoretical solution, modified arc-length method, and those of reported in the literature.

• Advances in aircraft and spacecraft science
• /
• 제8권1호
• /
• pp.1-15
• /
• 2021

Mars exploration demands aerodynamic computations for a proper design of missions of spacecraft carrying instruments and astronauts to Mars. Both Computational Fluid Dynamics (CFD) and Direct Simulation Monte Carlo (DSMC) method play a key role for this purpose. To the author's knowledge, the altitude separating the fields of applicability of CFD and DSMC in Mars atmosphere entry is not yet clearly defined. The limitations in using DSMC at low altitudes are due to technical limitations of the computer. The limitations in using CFD at high altitudes are due to thermodynamic non-equilibrium. Here, this problem is studied in Mars atmosphere entry, considering the Mars Pathfinder capsule in the altitude interval 40-80 km, by means of a DSMC code. Non-equilibrium is quantified by the relative differences between translational temperature and: rotational (θt-r), vibrational (θt-v), overall (θt-ov) temperatures, anisotropy is quantified by the relative difference between the translational temperature component along x and those along y (θx-y) and along z (θx-z). The results showed that θt-r, θt-v, θx-y, θx-z are almost equivalent. The altitude of 45 km should be the limit altitude for a proper use of a CFD code and the altitude of 40 km should be the limit altitude for a reasonable use of a DSMC code.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.167-174
• /
• 2000

Profiles of discontinuities through scanline method were investigated for the analysis of rock slope stability. Lower hemispheric projection method was used to evaluate the geometric stability and failure potential of these discontinuities. Also, safety factor was evaluated for the discontinuities of failure potential using by limit equilibrium analysis. Then, displacements of rock block due to the discontinuities were displayed by using the program UDEC(Universal Distinct Element Code) which applied the Distinct Element Method. When we determine the cut-slope in design, the characteristics of discontinuities is not represented only by strength parameters of intact rock. Therefore it is more reasonable method in assuring stability that first, construction would be preceded by the cut-slope of preliminary design, and then, cut-slope would be redetermined by elaborate site investigation in processing construction.