• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.2
• /
• pp.138-142
• /
• 1992

This experiment was carried out to investigate the effect of the application conditions of fertilizers on the seed yield and oil content of Perilla ocymoides L. The results were summarized as follows; 1. Plant height, number of nodes and branches, and number of clusters were not significantly affected by the application of fertilizers, but yield capacity and oil content of perilla increased by the potassium application. Phosphate application resulted in incerased seed yield and calcium application significantly affected the oil content. 2. The combined application of phosphate, potassium and calcium resulted in a big seed size but oil content was not high. 3. The fatty acid composition of perilla was not showed affected by the effect of application of fertilizer Unsaturated linolenic acid (64.5 %) was highest in the content of main fatty acid in perilla lipid followed by oleic acid (14.0 %), linoleic acid (13.8 %), palmitic acid (5.4 %) and stearic acid (1.8 %). 4. The contents of inorganic substances in seed ash of perilla showed the distribution pattern of K(21.3 %), Ca(12.8 %), Mg(8.2 %), Fe(0.34 %), Zn(0.15 %), Mn(0.10 %) and Na(0.08 %).

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.3
• /
• pp.304-311
• /
• 1985

This study was carried out to find the spring-season weed growth status on account of different soil physicochemical properties due to continuous application of same fertilizer for 8 years at paddy field. The results examined on weed species, dry weight of weed, and weed growth status were summarized as follows. 1. 1-6 species of weed occurred in the plots treated by continueous application of different fertilizers. Cyperus serotinus could grow only in the phosphate defficient plots, however, in the N+P+K, N+P and N+P+K+compost plots, 4-6 kinds of weed occurred variously. 2. In the plots applied phosphate like as, P, P+K, N+P+K+compost, and N+P+K+plots, large amount of weed occurred apparently. 3. Positive correlation betwaen dry weight of Alopeculus aequalis, polygonum hydropiper and Chenopodium alburn and available phosphate content in soil was showed with high significance. 4. Available phosphate in soil affected weed growth and weed species composition among weed communities. Application of lime fertilizer tended to suppress the occurrence of Alopeculus aequalis. 5. Dry matter of polygonum Longisetum, Chenopodium album and polygonum hydropiper showed higher content of nitrogen, phosphate, calcium, and magnesium. Whereas those of Alopeculus aequalis, Cyperus Serotinus and Stellaria alsine were less.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.65-65
• /
• 2012

Copper zinc tin sulfide ($Cu_2ZnSnS_4$, CZTS) is a very promising material as a low cost absorber alternative to other chalcopyrite-type semiconductors based on Ga or In because of the abundant and economical elements. In addition, CZTS has a band-gap energy of 1.4~1.5eV and large absorption coefficient over ${\sim}10^4cm^{-1}$, which is similar to those of $Cu(In,Ga)Se_2$(CIGS) regarded as one of the most successful absorber materials for high efficient solar cell. Most previous works on the fabrication of CZTS thin films were based on the vacuum deposition such as thermal evaporation and RF magnetron sputtering. Although the vacuum deposition has been widely adopted, it is quite expensive and complicated. In this regard, the solution processes such as sol-gel method, nanocrystal dispersion and hybrid slurry method have been developed for easy and cost-effective fabrication of CZTS film. Among these methods, the hybrid slurry method is favorable to make high crystalline and dense absorber layer. However, this method has the demerit using the toxic and explosive hydrazine solvent, which has severe limitation for common use. With these considerations, it is highly desirable to develop a robust, easily scalable and relatively safe solution-based process for the fabrication of a high quality CZTS absorber layer. Here, we demonstrate the fabrication of a high quality CZTS absorber layer with a thickness of 1.5~2.0 ${\mu}m$ and micrometer-scaled grains using two different non-vacuum approaches. The first solution-processing approach includes air-stable non-toxic solvent-based inks in which the commercially available precursor nanoparticles are dispersed in ethanol. Our readily achievable air-stable precursor ink, without the involvement of complex particle synthesis, high toxic solvents, or organic additives, facilitates a convenient method to fabricate a high quality CZTS absorber layer with uniform surface composition and across the film depth when annealed at $530^{\circ}C$. The conversion efficiency and fill factor for the non-toxic ink based solar cells are 5.14% and 52.8%, respectively. The other method is based on the nanocrystal dispersions that are a key ingredient in the deposition of thermally annealed absorber layers. We report a facile synthetic method to produce phase-pure CZTS nanocrystals capped with less toxic and more easily removable ligands. The resulting CZTS nanoparticle dispersion enables us to fabricate uniform, crack-free absorber layer onto Mo-coated soda-lime glass at $500^{\circ}C$, which exhibits a robust and reproducible photovoltaic response. Our simple and less-toxic approach for the fabrication of CZTS layer, reported here, will be the first step in realizing the low-cost solution-processed CZTS solar cell with high efficiency.

• The Journal of Engineering Research
• /
• v.4 no.1
• /
• pp.69-85
• /
• 2002

The chemical composition of bottle glass is consisted of Na2O-CaO-SiO2. However the cullet is mornally used in order to decrease the melting tsmperature. This induce the productivity of bottle and decreases the cost. The addition of plate glass decreases the Al2O3 content and in fluence the stone phenomenon and devitification in botle glass. Tus the Feldspar is added in order to increase the Al2O3 content when plate cullet was added in melting. The Tridymite crystal was observed over 7.5% Al2O3 contents, which shown as white crystal in appearance. It is Supposed that the Wollastonite Would be occurred in more over 7.5% Al2O3. This fad id well consised With the Litertctures.

• Korean journal of food and cookery science
• /
• v.25 no.6
• /
• pp.690-702
• /
• 2009

Liparis tessellatus(cubed snailfish), Hemitripterus villosus(shaggy sea raven), Ligularia fischeri, and Cirsiu setidens, which are staple products in Samcheok, were studied as food resources for the development of a representative local menu. Thus, their nutritional compositions were analyzed, and the resulting values were used to assess the nutritional characteristics of the newly-developed menu. In Liparis tessellatus and Hemitripterus villosus, the organic components including protein and fat tended to be lower than the corresponding values referred to as the 'Seventh Revision Food Composition Table' (2006), which was presumably linked to the spawning period of the fish. The contents of Zn, Cu, and Mg, which are nutritionally important even though the consumption of these minerals by Koreans is not sufficient, were determined to 0.5, 0.2, and 34.3 mg/100 g for Ligularia fischeri, and 26.2, 1.1, and 147.7 mg/100 g for dried Cirsiu setidens. Cirsiu setidens cultivated in Samcheok contained noticeably higher amounts of calcium, zinc, and iron, and its calcium level was more than an order of magnitude higher than that provided by the Food Composition Table. This might be associated with the fact of that Samcheok is abundant in lime which consists of calcium-containing inorganic materials. n-3 fatty acids including docosahexaenoic acid(DHA) accounted for 21% and 13% of the total fatty acids, for Liparis tessellatus and Hemitripterus villosus, respectively, and the major amino acids were glutamic acid, aspartic acid, glycine, and alanine for both fish. One of the newly developed menus, Cirsiu setidens hae-jang-gook, was nutritionally superior to the corresponding menu that used dried radish leaves, a typical ingredient in hae-jang-gook, in terms of the protein, iron, and zinc contents. Rice pottage cooked with Liparis tessellatus instead of abalone was high in protein, calcium, iron and zinc, where one serving provided 29.1, 15.4, 31.0, and 27.8% of their Reference Intake (RI)s, respectively.

• The Korean Journal of Mycology
• /
• v.31 no.3
• /
• pp.192-199
• /
• 2003

This study was carried out to investigate the artificial cultivation of Pleurotus eryngii on the optimal medium vessel, periods of cultivation and the optimal method of pinheading for both yield and quality of fruiting body were also performed. The optimal composition of sawdust medium in polypropylene(PP) bottle was combination of sawdust(70%) and corncob(30%) but increased amount of corncob delayed the period of mycelial growth. The mycelial growth and the yield of fruiting body in the medium with beat pulp were worse than that without beat pulp. The optimal composition of nutrients for both yield and quality of fruit body tuned out to be a combination of rice bran(12%), wheat bran(12%) and cottonseed cake(6%). Additions of zeolite, shell lime and bean curd dregs were not effective in mycelial growth and yield of fruit body. When testing size of PP bottle for cultivation, the larger of bottle mouth is, the more pinheading number found, but the number of available fruit body is not significantly different. The culture in $1100\;ml-{\phi}75\;mm$ bottle is the best in the yield and quality of fruit body than those in $555\;ml-{\phi}50\;mm,\;850\;ml-{\phi}58\;mm,\;850\;ml-{\phi}65\;mm\;and\;1100\;ml-{\phi}65\;mm$ bottle. Using the PP bag for cultivation, a square shaped bag was better than a round shaped and black square shaped in mycelial growth and yield of fruit body. The most suitable period of incubation was 35 days after inoculation at $22{\pm}2^{\circ}C$. When the incubation periods was decreased less than 35 days, the pileus formation and yields were very bad but a pinheading condition looked similar, For an optimal pinheading, turning upside down was better than standing and covering.

• Journal of Life Science
• /
• v.21 no.10
• /
• pp.1460-1465
• /
• 2011

This study was conducted to determine the effects of total mixed fermentation (TMF) with bean curd dregs on body weight gain, feed intake and body size of growing Hanwoo heifers. Thirty Hanwoo heifers, 6 months of age and weighing $125.9{\pm}12.0$ kg, were randomly allocated to 3 experimental groups of 10 animals each for a 6-month feeding trial. The groups were T1 (rice straw offered ad libitum with restricted (1.7% BW/day) concentrate), T2 (TMF only offered ad libitum) and T3 (TMF and rice straw offered ad libitum with restricted (1.0% BW/day) concentrate). TMF feeds were composed of 60% bean curd dregs, 16.5% corn meal, 10.4% wheat bran, 5% rice straw, 7% rice hulls, 0.5% urea matter, 0.5% magnesia lime and 0.1% lactic acid bacteria. The chemical composition and pH value of TMF feeds were measured at 0, 24, 48 and 72 hr after storage. In TMF with bean curd dregs, there were no differences in concentrations of DM, EE, and CF according to storage periouds. The ADF and NDF at 72 hr of storage time showed a significant decrease (9.52 and 3.15 %, respectively) compared to 0h of storage time (p<0.05). The value of pH was gradually decreased during the storage periods. Body weight gain, feed intake and average daily gain were higher in the TMF groups (T2, T3) compared to the T1 group (p<0.05). Changes in body size were also higher in the TMF groups compared to the T1 group (p<0.05). Thus, the present results indicate that TMF with bean curd dregs may help improve growth performance in growing Hanwoo heifers.