• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.7
• /
• pp.1-8
• /
• 2011

The high efficiency tubular LED lamp has been developed. But, it occurs optical losses in consists of LED package, module, diffuser etc.. By Measuring the tubular LED lamp's luminous flux, we compared and analyzed about the effect of optical losses for each component and actually using measured luminous intensity distribution data, illuminance distribution was simulated by Relux. Optical losses are 24[%] from LED package to luminaire and the tubular LED lamp can be replaced with fluorescent lamp. In this paper, we could provide data for optimum lighting design by analyzing the optical characteristics for developing and propagating the tubular LED lamp.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.10
• /
• pp.14-22
• /
• 2011

The artificial lights to be introduced for the plant factories is requiring the artificial light resources with minimizing the energy consumption to reduce the greenhouse gases which is a major cause of global warming, and maximizing the efficiency in photosynthesis effect light-wave range, in which the plants can be greatly grown and developed, and having the signal light-wave range for forming the light types. the best growing and developing environment for the plants has recently realized with utilizing the LED(Lighting Emitting Diode) lamps, as a environment-friendly green lamps, which can elevating the light efficiency with using only the specific light wave range. In this study, to provide the necessary lights for the full artificial light type of the plant factory, the following research/study and experiments has been conducting. experiments of the spectrum for each light sources, and LED, The intensity of illumination, Irradiance, Photosynthesis Photon Flux Density.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.263-268
• /
• 2008

In a residential complex case, the efficiency of land use are maximized, but a variation of external condition such as load in-equality, the increase in wind velocity and solar radiation by a height causes increasing energy in a building. Besides, because of increasing window size for a lighting and a view, it comes heating load in winter and cooling load in summer. A choice of cooling-system is important for this reason. Recently an internal high-rise residential complex installs an air-cooling system and operates individual heating. However, this study applies water-cooling used one public cooling-tower instead of an air-cooling system, also with an efficiency test of an air and a water-cooling system, consider an internal applicability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1163-1167
• /
• 2008

Since Samsung SDI and Sony started mass production of AM-OLED display for mobile/TV applications, OLED technology has emerged as leading candidate among the many technologies under development for next generation Flat panel displays. P-OLED (Polymer Organic Lighting Emitting Diode) technology, a class of OLED, is gathering momentum towards commercialization. P-OLED technology has made tremendous progress in terms of display performance (including life time, efficiency and color gamut) and in the maturity of ink jet printing process and equipment. In order to get into the mobile/TV application market successfully, P-OLED display technology must meet the following display makers' requirements: (1) P-OLED Display Performance in terms of lifetime, efficiency, and color coordinates, (2) Low Cost Manufacturing Technology such as "Solution Processable Printing Technology". P-OLED technology has already overcome many of the hurdles to mass manufacturing. In this paper, the latest developments in ink jet printing technology, including P-OLED material performance, is discussed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.3
• /
• pp.223-231
• /
• 2015

LEDs have been widely used in lighting displays, automobiles, and airplanes owing to their excellent light output characteristics and long lifespan. Though LEDs are manufactured under the same process, variations in impurity concentrations cause electrical deviation among LEDs. The resulting electrical deviation can not only reduce the life time of the LED but also cause non-uniform luminance of LEDs connected in parallel. LED driving circuit is required to solve these problems. In this paper, we propose a LED driving system using Y-type current balancing transformer to maximize the efficiency of the system by removing output stage Schottky diodes. Experimental results are presented to verify the performance of proposed LED driving system that is applied to 80 W LED modules.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.961-965
• /
• 2006

White organic LED spectrum for lighting and displaying should be designed for high luminous efficiency as well as good chromaticity coordinate, pleasant correlated color temperature and color rendering. A program based on Matlab was made to make these calculations convenient. The chromaticity coordinate and luminous efficiency was calculated according to the CIE 1931 colorimetric system, while the correlated color temperature(CCT) was calculated based on CIE 1960 UCS diagram. The color rendering characteristics were evaluated according to the CIE Color Rendering Index (CRI), using Ra, Ri and ${\bigtriangleup}E$ from the 14 color samples defined in CIE13.3.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2263-2264
• /
• 2008

전 세계적으로 에너지 소비가 지속적으로 증가하고 있는 가운데 석유, LNG와 같은 에너지 가격 또한 꾸준히 증가하고 있다. 이에 따라 에너지 절약을 유도하고 전력생산원가를 절감하고 전력수급의 안정을 도모하기 위한 수요관리가 대두되고 있다. 본 논문에서는 기존의 자료를 토대로 선형, 비선형 회귀분석을 실시하여 2015까지의 에너지 회피비용과 고효율 조명기기의 보급량을 추정한다. 그 후 에너지 회피비용의 변화를 고려하지 않은 현행 방식과 에너지 회피비용의 변화를 고려한 수정된 방식을 비교하여 경제성 평가에 대한 에너지회피비용의 영향에 대해 분석한다. 그리고 경제성 평가 결과를 통하여 고효율 조명기기 정책의 방향을 제시한다.

• Architectural research
• /
• v.19 no.4
• /
• pp.89-94
• /
• 2017

In Korea, it is necessary to improve the performance of buildings with respect to the energy efficiency while improving the quality of occupants' lives through a sustainable built environment. During the design and development process, building projects must have a comprehensive, integrated perspective that seeks to reduce heating, cooling and lighting loads through climate-responsive designs. The aim of this study is to assess the optimal window-to-wall ratio of multi-rise residential units in the early design phase in Korea. The study analyzed the variation of annual heating and cooling energy load in two apartment prototype units located in Seoul city using different WWRs. The analysis was conducted using Autodesk Ecotect Analysis 2011 tool. The study found for total annual building load reductions WWR on the south and north face should be studied independently based on the room function. It also found reducing the WWR for bedrooms and windows on the northern façade resulted in reduced total annual building load.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.658-667
• /
• 1996

A computer vision system was developed to automatically detect and locate the oyster hinge line, one step in shucking an oyster. The computer vision system consisted of a personal computer, a color frame grabber, a color CCD video camera with a zoom lens, two video monitor, a specially designed fixture to hold the oyster, a lighting system to illuminate the oyster and the system software. The software consisted of a combination of commercially available programs and custom designed programs developed using the Microsoft CTM . Test results showed that the image resolution was the most important variable influencing hinge detection efficiency. Whether or not the trimmed -off-flat-white surface area was dry or wet, the oyster size relative to the image size selected , and the image processing methods used all influenced the hinge locating efficiency. The best computer software and hardware combination used successfully located 97% of the oyster hinge lines tested. This efficienc was achieve using camera field of view of 1.9 by 1.5cm , a 180 by 170 pixel image window, and a dry trimmed -off oyster hinge end surface.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.487-492
• /
• 2012

In this study we researched a spotlight in LED lighting. Ordinary LED spotlight was manufactured with characterized property of traveling straightness of LED light source, but multiple use of shell type LED, a yellow band has formed caused by light source interference between the LED. Also, there was a high miscellaneous light efficiency with losing light source homogeneity and efficiency due to light source control uneasiness. The study uses aspheric reflector and aspheric lens, so we can control the light source of LED spotlight with effectively and we reached surface light source by using COB/COM for LED module. Furthermore it can change its use by a reduced scale of light system. It has been designed to make its various application from low power consumption of bicycle lamp, up to high power consumption of automobile lamps and lighthouse.