• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2031-2039
• /
• 2015

In the LED lighting industry, the dimming function in the LED lamp is required by demands of many consumers. To drive this LED lighting, various types of power converters have been applied. Among them, an LLC resonant converter could be applied for high power LED lighting because of its high efficiency and high power density, etc. The function of power factor correction (PFC) might be added to it. In this paper, a dimmable single-stage asymmetrical LLC resonant converter is proposed. The proposed converter performs both input-current harmonics reduction and PFC using the discontinuous conduction mode (DCM). Also, the lower voltage stress across switching devices as well as the zero voltage switching (ZVS) in switching devices is realized by the proposed topology. It can reduce cost and has high efficiency of the driver. In addition, the regulation of the output power by variable switching frequency can vary the brightness of a light. In the proposed converter, one of the attractive advantages doesn’t need any extra control circuits for the dimming function. To verify the performance of the proposed converter, simulation and experimental results from a 300W prototype are provided.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1101-1107
• /
• 2013

A light emitting diodes(LED) lighting has been increasingly used due to its low power consumption, long life time, high efficiency, and environment friendly characteristics. Also various power converters has been applied to drive these LED lighting. Among many power converters, a LLC resonant converter could be applied for LED lighting because of its high efficiency and high power density. Furthermore, the function of power factor correction(PFC) might be added. In this paper, 1-stage asymmetrical LLC resonant converter is proposed. The proposed converter performs both input-current harmonics reduction and PFC using the discontinuous conduction mode(DCM). The proposed 1-stage LLC resonant converter approach has the lower voltage stress across switching devices and achieve the zero voltage switching(ZVS) in switching devices. To verify the performance of the proposed converter, simulation and experimental results from a 300[W] prototype are provided.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1577-1582
• /
• 2006

Tandem OLED structures formed by connecting two or more low-voltage electroluminescent units (stacks) are effective for achieving high efficiency at low current density as well as long operational lifetime. We have fabricated white emitting tandem structures with two or three low-voltage white-emitting stacks using transparent organic "PN"-type connectors. Three- stack white tandem structures with efficiency greater than 24 cd/A at D65 and operational stability of about 110,000 h. (extrapolated) at $1000\;cd/m^2$ have been demonstrated. With a stacked structure, the power consumption for displays using an RGBW format can be reduced by 25% compared to previously described formulations. We have also fabricated advanced white tandem structures where the color gamut (NTSC x,y ratio) has been improved to greater than 70% using standard color filters. The white OLEDs can also be used to increase the colorrendering index CRI (>80%), an important consideration for solid-state lighting.

• Transactions on Electrical and Electronic Materials
• /
• 제17권1호
• /
• pp.41-45
• /
• 2016

The Cs₃Sb photocathode was formed by non-vacuum process technology and successive in-situ photocathode vacuum device fabrication carried out in a process chamber. Performance testing of the device was followed. Light emission from the devices was induced by photoemitted electrons, which were accelerated by an anode electric field that was shielded from the photoemitter surface. The luminescent characteristics of the devices were investigated by measuring the optical parameters as functions of the applied anode voltages. The results showed that this approach could produce a more easily directed and controlled stream of light. These features make these devices suitable for a variety of planar lighting applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.306-309
• /
• 2004

Recently, the environmental problem has received considerable attention. so, many lamps have been developing for environmental requirement and energy efficiency. also, at glow discharge lamp researchers try to reduce energy spending that is power saving lamp. this kind requirement agree with strong points of electrodeless fluorescent lamp has received to now lighting sauce. At low pressure as mTorr I.C.P make high density plasma easily, is good to maintain discharge, has high ionization and does not have failing lighting and losing ability of electron radiation by oxidation and volatilization of electrodes, because this tape does not have electrodes. This point of I.C.P can use at electrodeless fluorescent lamp in this study ICP display elements and Ar, Ne, Kr are researched for optical characteristic. each gas is looked into optical characteristic, also mixed gases is experiment for optical characteristic.

• 한국산학기술학회논문지
• /
• 제22권3호
• /
• pp.333-338
• /
• 2021

본 연구에서는 식물생장에 필요한 빛의 파장과 세기, 광합성 광자속밀도에 대한 정확한 이해를 위해 LED의 광변화를 통해 단색광과 혼합광에 조건변화에 따른 광합성 광량자자속밀도와 조도특성 파악하였다. LED의 조도와 광합성 광자속밀도의 특성을 파악하여 LED 조명설계시 도움을 주고자 한다. 조도와 광합성 광자속밀도는 거리에 반비례하는 특성을 보이며, 조도의 특성을 기준할 때는 Green광이 중요하며, 광합성을 위한 광합성 광자속밀도는 Blue광이 중요함을 알게 되었다. 식물의 광합성 특성만을 고려할 때, 영향도는 Blue > Red > white > Green 순서로 나타내었으며, 측정거리 30[cm]을 기준으로 60[cm], 90[cm], 120[cm]의 감소수준은 각각 약 36[%], 18[%], 10[%]의 수준으로 감소됨을 알았다. Red:Blue광원의 혼합광원의 특성을 본 결과, 혼합 Red;Blue) LED 광원 비율(2:1, 3:1, 4:1)과 측정거리에 따른 값은 30[cm]에서의 측정값을 100%라 가정할 때 120[cm]에서의 측정값은 10~11[%]수준임을 확인하였다. 얻어진 결과를 통해 실내 온실의 광효율 극대화를 위한 최적 구조를 제안하고 향후 연구의 진행 방향 설정에 기여하고자 하였다.

• Elastomers and Composites
• /
• 제50권1호
• /
• pp.1-6
• /
• 2015

Polybutadiene rubber (BR) has been well known that its physical and chemical properties are changed when it is exposed to ultraviolet light undergoing photooxidation. In this study, photooxdiation process of BR vulcanizate was investigated using a high pressure mercury lamp used as an outdoor lighting, which has high UV radiation efficiency and reasonable cost. Discoloration and crack formation of photooxdized BR vulcanite surface were examined using an image analyzer. Change of chemical functional groups of BR vulcanite surface by photooxidation was investigated using ATR-FTIR, and variation of the crosslink density with the UV irradiation time was investigated. By increasing the UV irradiation time, the crosslink density steeply increased after a period of time and did not increase any more. Formation of hydroxyl (~OH) and carbonyl (~C=O) groups on the BR vulcanizate surface increased and the1,4-cis unit was converted to the 1,4-trans unit as the photooxidation was proceeded.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.150-152
• /
• 2004

In recent, there have been several developments in lamp technology that promise savings in electrical power consumption and improved quality of the lighting space. The electrodeless fluorescent lamp is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. In this paper, electron temperature and electron density were measured in a radio-frequency inductively coupled plasma using a Langmuir probe method for emission characteristics. Measurement was conducted in an Ne discharge for pressure from 10 [mTorr] and input RF power 100 [W] to 150 [W]. As for the electron density, a electron temperature was more distinguished for a emission characteristic. The results of ideal may contribute to systematic understanding of a electrodeless fluorescent lamps of emission characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.167-170
• /
• 2004

In recent, there have been several developments in lamp technology that promise savings in electrical power consumption and improved quality of the lighting space. The electrodeless fluorescent lamp is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. In this paper, electron temperature and electron density were measured in a radio-frequency inductively coupled plasma using a Langmuir probe method for emission characteristics. Measurement was conducted in an Argon, Ne discharge for pressure from 1 [mTorr] and input RF power 10 [W] to 150 [W]. As for the electron density, a electron temperature was more distinguished for a emission characteristic. The results of ideal may contribute to systematic understanding of a electrodeless fluorescent lamps of emission characteristics.

• 생물환경조절학회지
• /
• 제32권3호
• /
• pp.226-233
• /
• 2023

하절기의 높은 일사량은 작물의 과도한 호흡을 유발하여 광합성을 감소시킨다. 또한 주로 하절기에 발생하는 장마는 온실 내부에 저일조 환경을 유발한다. 저일조 환경은 작물의 생육과 생산량을 감소시키는 원인이 될 수 있다. 본 연구는 하절기 차광과 보광이 오이의 생육과 생산량에 미치는 영향에 대해서 조사하기 위해 수행되었다. 오이 접목묘는 2022년 8월 30일에 플라스틱 온실 2동에 정식하였다. 온실 내부의 광량을 감소시키기 위해 온실 1동에 차광 스크린을 설치하였다. 보광처리는 2022년 9월 7일부터 2022년 10월 20일까지 수행되었다. 고압나트륨등(high-pressure sodium lamp), 백색 LED(white LED, red:green:blue = 5:3:2), RB LED(combined red and blue LED, red:blue = 7:3)를 보광 광원으로 사용하였고, 무처리를 대조구로 설정하였다. 보광 처리는 일출 전과 일몰 후 2시간씩 수행하였고, 보광 광도는 150±20 µmol·m^-2·s^-1로 설정하였다. 식물 초장, 엽장, 엽폭, SPAD는 차광 처리에 의해 증가하는 경향을 보였다. RB LED에서는 차광 처리와 관계없이 경경이 유의성 있게 증가되었다. 과실의 생체중과 건물중은 차광과 보광 처리에서 유의미한 차이가 없었다. 과실의 평균 과중은 수확일이 지날수록 보광처리 간의 유의한 차이는 없었다. 결론적으로, 본 연구에서 하절기 오이 재배 시 50% 수준의 차광 처리는 오이의 생육을 유의하게 향상시켰다. 또한, 보광 대조구에서 생육과 과실 특성이 좋았다. 본 연구는 오이 재배 시 보광 기술을 적용하기 위한 기초 연구 자료로 활용될 수 있다.