• 한국건축시공학회지
• /
• 제4권3호
• /
• pp.93-100
• /
• 2004

In recent years, it has widely been studied on the light-weight composites for the purpose of the large space and thermal insulation of building structures. The purpose of this study is to evaluate the properties of light-weight composites made by binders as cement, resin and polymer cement slurry. The concrete composites are prepared with various conditions such as polymer-cement ratio, void-filling ratio, type of resin, filler content and light-weight aggregate content, tested for thermal conductivity. From the test results, the thermal conductivity of concrete composites with the binder of cement tends to decrease with increasing polymer-cement ratio, and to increase with increasing void-filling ratio. The thermal conductivity of concrete composites with the binder of resin are markedly affected by the light-weight aggregate content, type of resin and filler content. The composites made by polymer-modified concrete and polymer cement slurry have a good thermal insulation property. From the this study, we can recommend the proper mix proportions for thermal insulation Panel or concrete. Expecially. the thermal conductivity of concrete composites made by polyurethane resin is almost the same as that of the conventional expanded polystyrene resin.

• Steel and Composite Structures
• /
• 제52권2호
• /
• pp.165-182
• /
• 2024

Grouted sleeve splice (GSS) is an effective type of connection applied in the precast concrete structures as it has the advantages of rapidly assembly and reliable strength. To decrease the weight and cost of vertical rebar connection in precast shear walls, a light-weight sleeve is designed according to the thick-cylinder theory. Mechanical behaviour of the light-weighted GSS is investigated through experimental analysis. Two failure modes, such as rebar fracture failure and rebar pull-out failure, are found. The load-displacement curves exhibit four different stages: elastic stage, yield stage, strengthening stage, and necking stage. The bond strength between the rebar and the grout increases gradually from outer position to inner position of the sleeve, and it reaches the maximum value at the centre of the anchorage length. A finite element model predicting the mechanical properties of the light-weighted GSS is developed based on the Concrete Damage Plasticity (CDP) model and the Brittle Cracking (BC) model. The effect of the rebar anchorage length is significant, while the increase of the thickness of sleeve and the grout strength are not very effective. A model for estimating ultimate load, including factors of inner diameter of sleeves, anchorage length, and rebar diameter, is proposed. The proposed model shows good agreement with various test data.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 1980년도 학술대회지
• /
• pp.39-47
• /
• 1980

The harvesting and export of Canadian ginseng from the cool, shady hardwood forests of southern Canada can be traced to 1796. Because of its high dollar value and diminishing woodland supplies it was decided in 1896 that it should be cultivated under wood lath screens. Present day economics dictate changes in production techniques to allow for a decreasing supply of expensive labour. Traditional wooden lath screens have a surface area of wood of 70 per cent and permit light penetration of only about 18 per cent. Experimental woven black polypropylene shade has an estimated surface area of 72 per cent and permits light pentration of about 28 per cent. While differences in air and leaf temperatures under the two shade structures can be measured it is doubtful if these are great enough to cause differences in plant growth under the two structures. Shade grown ginseng had a low fresh and dry weight and total chlorophyll content (ratio of a to b was 3 to 1) comparable to other shade species. There was no differences in fresh and dry weight and chlorophyll content of leaves from plants grown under the two shade structures. Maximum net photosynthesis of leaves was 0.175 g $CO_2\;m^{-2}\;hr^{-1}$ and light saturation level was about $200{\mu}E\;m^{-2}\;s^{-1},$ or about 10 per cent of full sunlight.

• 한국융합학회논문지
• /
• 제2권3호
• /
• pp.1-6
• /
• 2011

대표적인 경량금속 중의 하나인 알루미늄 폼재의 연구동향을 기계적인 측면에서 고찰하여 보았다. 특히 기공(pore)을 가진 알루미늄재료는 난연성, 감쇠특성, 에너지흡수 성능 등 여러 측면에서 기존의 폴리머 폼재보다 우수한 기계적 성능을 가지고 있고, 더욱이 재활용이 가능하다는 면에서 환경보호에 관심이 집중되고 있는 현 시점에서 연구가 활발히 진행되고 있다. 폼재의 일반적 특성, 에너지 흡수 및 소음흡수 특성에 대해 살펴보고 폼재가 적용된 사례들에 대한 분석을 통해 향후 폼재와 외곽 구조재의 접합문제 등에 대한 제언을 하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.177-180
• /
• 2008

최근에 철근콘크리트 구조물에서 철근의 부식문제를 해결하기 위하여 FRP bar를 철근의 대체제로 사용하려는 연구가 활발히 진행되고 있다. FRP bar는 비부식성 뿐만 아니라 철근에 비하여 자중이 작으면서도 고강도를 갖는 특성을 갖고 있다. 따라서 FRP bar가 경량골재콘크리트와 함께 사용된다면 해양에 부유되는 구조물등에서 우수한 특성을 발휘할 수 있을 것으로 예상된다. 그러나 현재까지 경량콘크리트에 FRP bar를 휨보강근으로 사용하는 구조체에 대한 연구는 거의 전무한 실정이다. 본 연구에서는 GFRP bar 경량콘크리트보에 대하여 콘크리트의 전단력 기여분을 조사하기 위하여 콘크리트 압축강도와 휨보강근비를 변수로 하는 일련의 실험을 행하였으며 이 결과를 분석하였다. 연구결과, 선행 연구에서 제안된 식에 0.75배를 곱하여 구한 콘크리트의 전단력은 실험결과와 잘 일치하였으며, ACI 440.1R-06에서 제시한 식에 의한 결과보다 더 우수한 값을 주는 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.446-451
• /
• 2002

Honeycomb structures have advantages in weight reduction with stiffness increment. As far as noise is concerned, however a light aluminum structure, instead of a steel frame, should have an equivalent mass density in order to maintain sound insulation performance. In this paper, an evaluation of a material effect on noise has been examined.

• 한국철도학회논문집
• /
• 제9권6호
• /
• pp.635-643
• /
• 2006

In this paper, a theorectical approach is studied to predict structural performances and weight-reduction rates of hybrid bodyshells in case that the materials of roof structures are substituted. To determine other light-weight materials to be substituted for the original roof materials, bending and twisting deformations are considered under constant stiffness and strength conditions, which derive some new weight-reduction indices from a structural performance point of view. The indices derived to estimate the weight-reduction can be utilized as a good criterion at the conceptual design for material substitution of the roofs.

• Earthquakes and Structures
• /
• 제17권6호
• /
• pp.567-575
• /
• 2019

In order to investigate the dynamic impact resistance of steel fiber reinforced full light-weight concretes, we implemented drop weight impact test on a total of 6 reinforced beams with 0, 1 and 2%, steel fiber volume fraction. The purpose of this test was to determine the failure modes of beams under different impact energies. Then, we compared and analyzed the time-history curves of impact force, midspan displacement and reinforcement strain. The obtained results indicated that the deformations of samples and their steel fibers were proportional to impact energy, impact force, and impact time. Within reasonable ranges of parameter values, the effects of impact size and impact time were similar for all volumetric contents of steel fibers, but they significantly affected the crack propagation mechanism and damage characteristics of samples. Increase of the volumetric contents of steel fibers not only effectively reduced the midspan displacement and reinforcement strain of concrete samples, but also inhibited crack initiation and propagation such that cracks were concentrated in the midspan areas of beams and the frequency of cracks at supports was reduced. As a result, the tensile strength and impact resistance of full light-weight concrete beams were significantly improved.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.189-196
• /
• 2001

Machine tools of high-speed and high-precision are required for various fields of industry such as semiconductor, automobile, mold fabrication and so on. Light-weight machine tool structure is essential for reduction of production time through rapid transportation. Also, high damping capacity of the structure is required to obtain precise products without vibration during manufacturing. Composite materials have high potential for machine tool structures due to its high specific stiffness and good damping characteristics. In this study, the design and the manufacture of a hybrid machine tool structure using composite materials was attempted and the damping capacity was investigated experimentally.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.692-700
• /
• 2007

There are several types of foundations for light-weight structures, such as low story buildings, on soft clay deposits. Those foundations, such as piled raft, compensated foundation, mat foundation, floating foundation are commonly used rather then end-bearing piles to get more benefits on the construction and cost savings. In this study, settlement behaviors are computed and compared for several types of foundations on soft clay deposits. Also, theoretical expressions of parameters for piled raft system were provided with co-relations for design purposes. The predictions of settlements of piled rafts foundation are proposed based on the pile dimensions and design loads. From this study, the piled raft foundations is more benefits for reducing the settlement of clay deposits, and it is found that the piled raft system is applicable and effective on thick clay deposits, and that differential settlements of the foundation should be managed by designing the configuration of pile lengths.