• Journal of Information Display
• /
• v.8 no.2
• /
• pp.20-24
• /
• 2007

Efficient white organic light-emitting diodes are fabricated with the blue and red electroluminescent (EL) units electrically connected in a stacked tandem structure by using a transparent doped organic p/n junction. The blue and red EL units consist of the light-emitting layer of 1,4-bis(2,2-diphenyl vinyl)benzene (DPVBi) and 4-dicyanomethylene-2-methyl-6-[2-(2,3,6,7-tetrahydro-1H,5H-benzo[i,j] quinolizin-8-yl)vinyl]-4H-pyran) (DCM2) doped tris(8-hydroxyquinoline) aluminum $(Alq_3)$, respectively. The organic p-n junction consists of ${\alpha}-NPD$ doped with $FeCl_3$ (15 % by weight ratio) and $Alq_3$ doped with Li (10 %). The EL spectra exhibit two peaks at 448 and 606 nm, resulting in white light-emission with the Commission Internationale d'Eclairage (CIE) chromaticity coordinates of (0.36, 0.24). The tandem device shows the quantum efficiency of about 2.2 % at a luminance of 100 $cd/m^2$, higher than individual blue and red EL devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.620-622
• /
• 2004

In this study, a mono-chelated compound as novel blue light emitting material, $BPh_2$(pbi) (pbi = 2-(2-Pyridyl)benzimidazole) was synthesized Organic light emitting Diodes (OLEDs), which has a ITO/NPB(40 nm)/Boron(30 nm)/$Alq_3$(1 nm)/Liq(3 nm)/Al(150 nm) structure, has been fabricated. The maximum brightness of the device is up to about 900 cd/$m^2$ and 0.54 cd/A at 11.5 V. The EL peaks and CIE coordinates of our OLEDs is 457 nm and (0.26, 0.29), respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.7
• /
• pp.795-800
• /
• 2005

The optical properties of $ZnS_{y}Se_{1-x-y}:Te_x\;(x\;<\;0.08,\;y\∼0.11$) alloys grown by molecular beam epitaxy (MBE) have been investigated by photoluminescence (PL) and PL-excitation (PLE) spectroscopy. Good optical properties and high crystal quality were established with lattice match condition to GaAs substrate. At room temperature, emission in the visible spectrum region from blue to green was obtained by varying the Te content of the ZnSSe:Te alloy. The efficient blue and green emission were assigned to $Te_{1}$Tel and $Te_{n}$ (n$\geq$2) cluster bound excitons, respectively. Bright blue (462 nm) and green (535 nm) light emitting diodes (LEDs) have been developed using ZnSSe:Te system as an active layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1464-1466
• /
• 2007

We demonstrate p-doped organic light emitting diodes (OLEDs) comprising tungsten oxide ($WO_3$) and 1,4-bis[N-(1-naphthyl)-N'-phenylamino]-4,4' diamine (NPB). We propose the NPB : $WO_3$ composition functions as a p-doping layer which significantly improves hole injection that leads to the fabrication of 4-(dicyano-methylene)-2-methyl-6-(p-dimethylaminos tyryl)-4H-pyrane (DCMl) based p-doped OLEDs with high efficiency and long lifetime.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.9
• /
• pp.1344-1346
• /
• 2005

We report microcavity effect of top emission organic light-emitting diodes (OLEDs) by using Al cathode and anode, which are feasible for not only top emission EL and angle dependant effects but facile evaporation process without ion sputtering. The device in case of $Alq_3$ green emission showed largely shifted EL maximum wavelength as 650 nm maximum emission. It was also observed that detection angle causes different EL maximum wavelength and different CIE values in R, G, B color emission. As a result, the green device using $Alq_3$ emission showed 650 nm emission ($0^{\circ}$) to 576 nm emission ($90^{\circ}$) as detection angle changed. We believe that these phenomena can be also explained with microcavity effect which depends on the different length of light path caused by detection angle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.198-201
• /
• 2002

We have studied the temperature dependence of current-voltage and luminance-voltage characteristics of Organic Light Emitting Diodes(OLEDs). The OLEDS are based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD) as a hole transport, tris(8-hydroxyquinolinoline) aluminum(III) (Alq$_3$) as an electron transport, and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as a buffer layer. The current-voltage and luminance-voltage characteristics were measured in the temperature range of 10[K] and 300[K]. A conduction mechanism in OLEDs has been interpreted in terms of space-charge-limited current(SCLC) and tunneling mechanism.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1007-1010
• /
• 2003

We made use of $Alq_3$ which is the representative light-emitting material. Electric conduction mechanism and luminance characteristics were analyzed in this paper. We have also measured current density-thickness-voltage characteristics with thickness variation from 60 to 400nm. we analyzed the low electric and the high electric field in theoretically. Also, maximum luminous efficiency is the thickness 200 nm of $Alq_3$ in luminous-thickness characteristics.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2002.05a
• /
• pp.167-171
• /
• 2002

We have investigated the optical properties of Te-doped ZnSSe:Te epitaxial layers grown on (100) GaAs substrates by molecular beam epitaxy. The Te-doped ternary specimen shows strong blue or green emission (at 300k) which is assigned to Te$_{1}$ or Te$_{n}$( n$\geq$2) cluster bound exciton. Bright green and blue light-emitting diodes (LEDs) have been developed using ZnSSe:Te system as an active layer. The green LEDs exhibit a fairly long device lifetime (>2000 h) when operated at 3 A/cm$^{2}$ under CW condition at room temperature. It is confirmed that the Te-doping induced "crystal-hardening effect" plays a significant role in both efficient and strong suppression of the optical device degradation.gradation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.837-838
• /
• 2009

In this work, pyromellitic dianhydride (PMDA) was used as a cathode interfacial layer in the organic light emitting diodes (OLEDs) and its thickness was optimized. Various electrical and optical characterizations of the OLEDs having various thicknesses of the PMDA cathode interfacial layer revealed that the best OLED performance could be achieved by using 0.5 nm-thick PMDA layer compared to the control device without any interfacial layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.184-187
• /
• 2009

In this paper, we study effect of charge balance on performance of blue phosphorescent organic light emitting diodes (OLEDs). Charge balance determines the location of recombination zone in the OLEDs. By tuning the charge balance in iridium (III) bis[(4,6-difluorophenyl)-pyridinate-N,C2']picolinate (FIrpic) based blue phosphorescent organic light-emitting devices (PHOLEDs) with a high mobility and high triplet energy electron transporting material, we were able to achieve a high current efficiency of 60 cd/A which is a 3X improvement over previous devices with 3,5'-N,N'-dicarbazole-benzene (mCP) host.