• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.37-40
• /
• 2000

This paper has been studied on characteristics of organic light-emitting device with various cathode materials. These catode materials were Al：Li(5%), Al, Cu, CsF/Al. And in these devices, HTL(hole transfer layer) was TPD and EML(emitting layer) was Alq$\sub$3/. We studied the I-V characteristics for each device. And then, the turn-on voltage of device for Al-Li(5%), Al, Cu, CsF/Al cathode were 7, 9, 13, 3V respectively. So, the CsF/Al cathode is superior to other cathode materials for I-V characteristics.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.3
• /
• pp.97-100
• /
• 2005

Dynamic response of organic light-emitting diodes were analyzed in $ITO/Alq_3$(100 nm)/Al device structure with a variation of voltage an frequency. At low frequency region, complex impedance is mostly governed by resistive component, and at high frequency region by capacitive component. Also, we have evaluated resistance, capacitance and permittivity of devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.817-819
• /
• 2009

We have developed highly efficient blue phosphorescent organic light-emitting devices (PHOLEDs) with simplified architectures using new host materials. The Blue PHOLED with new host:FIrpic emitting layer exhibits a maximum luminance efficiency of 34 cd/A and a low operating voltage 5 V at a high luminance of 1212 cd/$m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.137-140
• /
• 2007

We prepared ambipolar organic field-effect transistors and observed blue emission when both hole and electron accumulation layers were in the channel. We found that the reduction of carrier traps and controlling devices' preparation and measurement conditions were crucial for ambipolar operation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1075-1078
• /
• 2006

New iridium complex was synthesized and demonstrated a deep red light emission in organic light-emitting diodes (OLEDs). The maximum luminance of 8320 cd/m2 at 15 V and the luminance efficiency of 2.5 cd/A at 20 mA/cm2 were achieved. The peak wavelength of the electroluminescence was at 626 nm with the CIE coordinates of (0.69, 0.30), and the device also showed a stable color chromaticity with various voltages.

• Electronics and Telecommunications Trends
• /
• v.34 no.2
• /
• pp.10-18
• /
• 2019

Since the introduction of CRT(Cathode Ray Tube) in the 1950s, display technologies have been developed continuously. Flat panel displays such as PDP(Plasma Display Panel) and LCD(Liquid Crystal Display) were commercialized in the late 1990s, and OLED(Organic Light Emitting Diodes) and Micro-LED(Micro-Light Emitting Diodes) are now being developed and are becoming widespread. In the future, we expect to develop ultra-realistic, flexible, embedded sensor displays. Ultra-realistic display can be applied to AR/VR(Augmented Reality/Virtual Reality) devices and spatial light modulators for holography. The sensor-embedded display can be applied to robots; electronic skin; and security devices, including iris recognition sensors, fingerprint recognition sensors, and tactile sensors. AR/VR technology must be developed to meet technical requirements such as viewing angle, resolution, and refresh rate. Holography requires optical modulation technology that can significantly improve resolution, viewing angle, and modulation method to enable wide-view and high-quality hologram stereoscopic images. For electronic skin, stable mass production technology, large-area arrays, and system integration technologies should be developed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1148-1151
• /
• 2009

A self-designed, written in labview, Organic Light-Emitting Diode junction temperature measuring program was used to calculate the internal junction temperature for devices during operation, and an infrared thermometer was used to measure the backside temperature of the device substrate, to discuss the effects of the junction and substrate temperature difference to the characteristics of the device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.928-931
• /
• 2003

In order to realize full color display, two approaches were used. The first method is the patterning of red, green, and blue emitters using a selective deposition. Another approach is based on a white-emitting diode, from which the three primary colors could be obtained by micro-patterned color filters. White-light-emitting organic light emitting devices (OLEDs) are attracting much attention recently due to potential applications such as backlights in liquid crystal displays (LCDs) or other illumination purposes. In order for the white OLEDs to be used as backlights in LCDs, the light emission should be bright and have Commission Internationale d'Eclairage (CIE) chromaticity coordinates of (0.33, 0.33). For obtaining white emission from OLEDs, different colours should be mixed with proper balances even though there are a few different methods for mixing colors. In this study, we will report a white organic electroluminescent device using exciton diffusion length concept.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.755-757
• /
• 2009

We developed a novel patterning method of organic light emitting materials using a laser-inscribed sacrificial layer for fabricating high-resolution pixels in organic light emitting displays (OLEDs). Our patterning process is capable of achieving high spatial resolution of about 10 ${\mu}m$. Moreover, it has no detrimental effect on the electrical properties of organic materials. This patterning approach is expected to be applicable for patterning and integrating a wide range of organic materials for organic electronic and optoelectronic devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.497-499
• /
• 2005

A portable terminal assistant market grows rapidly every year and it requires many change in research on display devices. Among many newly developing methods, OLED(Organic Light Emitting Diode) is considered an advanced flat display device because its excellent characteristics, including high speed response, full color performance, low power consumption and flux of panel. However changes in the market of display shows that the market will require 3-dimensional images, but it is hard for existing 2-dimensional displays to make 3-dimensional images. Therefore we will try to find various methods such as holograms. In this paper, we will show existing flat displays can make 3-dimensional images by applying Lenticular Screen printing techniques on the organic semiconductor display device.