• 대한임베디드공학회논문지
• /
• 제8권2호
• /
• pp.111-119
• /
• 2013

This paper proposes one method on photometric stereo calibration using the constraint on light source directions in which the light sources have the unknown tilt and slant angles but the slant angles are the same. First, the constraint is analyzed based on the equation of linear ambiguity which leads to the conclusion that another constraint should be added to solve the calibration completely. Later, the combination of constraint on light source directions and the constraint that there exists at least six surface patches having known albedos is exploited to resolve the linear ambiguity up to an accurate and close-form solution. The effective performance of the proposed method is demonstrated through experiment results.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.243-247
• /
• 2009

A Radioactive constraint of the nuclear fuel assembly irradiated by neutron during normal operation cycle of the nuclear power plant is typically on the order of about 3 kGy/h. In order to inspect nuclear fuel assembly using a VT (vision technology) system, the light such as halogen lamp is used. As the halogen lamp has lower color temperature than the sun light, the objects under halogen lamp illumination are seemed to be tinted with red. In this paper, high brightness LED is considered to be used as the light source of VT system. The high brightness LED, which is a key light source of the VT system, have been gamma irradiated at the dose rate of 4 kGy/h during two hours up to a total dose of 8 kGy. The radiation induced color-center in the LED housing cap made of plastics materials is observed.

• 분석과학
• /
• 제31권5호
• /
• pp.195-200
• /
• 2018

연구자들은 지문 증강 기법에 대한 효과성을 비교하기 위하여 시각적인 판단기준을 이용해왔다. 그러나 시각적인 판단기준은 연구자의 주관적 판단이기 때문에 편향이 생길 수 있다. 따라서 많은 연구자들은 Contrast Index를 이용하여 지문 증강 기법에 대해 객관적인 판단을 하고자 하였다. 하지만 선행연구에서는 잉크지문 또는 정색반응을 통해 현출한 지문에서만 Contrast Index를 검증했다는 한계가 있다. 따라서 본 연구에서는 Contrast Index를 이용하여 표준지문의 농담에 따라 색지별 형광지문의 증강 정도를 비교하였다. Contrast Index의 값은 표준지문의 농담, 배경의 색, 사용 시약 및 광원에 따라 같은 표준지문을 이용하였음에도 각기 다른 값을 나타내었고, 수치 비교를 통하여 배경의 색, 사용 시약 및 광원에 따른 형광지문의 증강 정도를 비교할 수 있었다. 시각적 평가기준을 이용하였을 때에는 시약과 광원에 상관없이 같은 최고점의 점수를 얻은 것과 달리 Contrast Index값을 이용한 본 연구에서는 좀 더 세세한 점수 비교를 할 수 있었다. 결론적으로 Contrast Index를 이용하여 형광시약의 증강 정도를 비교한다면 배경색에 따라 광원과 시약을 선택하는 판단 근거로 사용할 수 있음을 확인하였다.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.710-717
• /
• 2015

Projection stereolithography is an additive manufacturing method that uses beam projection to cure the photo-reactive resin used. The light source of a cross-section layer-form illuminates photo-curable resin for building a three-dimensional (3D) model. This method has high accuracy and a fast molding speed because the processing unit is a face instead of a dot. This study describes a Scalable Projection Stereolithography 3D Printing System for improving the accuracy of the stereolithography. In a conventional projection 3D printer, when printing a small sized model, many pixels are not used in the projection or curing. The proposed system solves this problem through an optical adjustment, and keeps using the original image as possible as filling the whole projection area. The experimental verification shows that the proposed system can maintain the highest level of precision regardless of the output size.