• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.61-69
• /
• 2004

Small angle light scattering (SALS) and field emission scanning electron microscope (FE-SEM) have been used to investigate the effects of alcohol on phase separation of chlorinated poly(vinyl chloride) (CPVC)/tetrahydrofuran (THF)/alcohol (9/61/30 wt%) solution during water vapor induced phase separation. A typical scattering pattern of nucleation & growth (NG) was observed for all casting solutions of CPVC/THF/alcohol. In the case of the phase separation of CPVC dope solution containing 30 wt% ethanol or n-propanol, the demixing with NG was observed to be heterogeneous. Meanwhile, the phase separation of CPVC dope solution with 30 wt% n-butanol was found to be predominantly homogeneous NG. Although the different phase separation behavior of NG was observed with types of alcohol additives, the resultant surface morphology had no remarkable differences. That is, even though the NG process by water vapor is either homogeneous or heterogeneous, this difference does not play a main role on the final surface morphology. However, it was estimated from the result of hydraulic flux that the phase separation by homogeneous NG provided the membrane geometry with lower resistance in comparison with that by heterogeneous one.

• 폴리머
• /
• 제27권4호
• /
• pp.313-322
• /
• 2003

상용화제와 교환반응 촉진제 도입에 따른 폴리(에틸렌 테레프탈레이트) (PET)/폴리(메타-자이렌 아디프아미드) (MXD-6) 블렌드의 형태구조 변화와 일축 연신한 블렌드 시료의 변형 형태구조를 조사하였다. 연신시료는 피브릴 구조의 분산상을 보여주었으며, 피브릴 구조는 연신비 증가에 따라서 점차 미세하게 변형되었다. 교환반응 촉진제나 상용화제의 첨가는 계면 접착력 향상에 기여하기보다는 분산상과 연속상 간에 결함을 야기함으로써 피브릴 구조의 균일성을 감소시켰다. H$_{v}$ 모드의 광산란을 이용하여 블렌드 조성과 연신비에 따른 고차구조 변화를 알아보았다. H$_{v}$ 산란패턴으로부터 결정들이 스택을 이루며, 스택은 연신 방향에 대하여 특정한 각도로 배향됨을 알 수 있었다. 분산상과 연속상 내의 결정은 연신비 증가에 따라서 점진적으로 배향되어, 연신비가 6.0인 경우에는 매우 높은 배향 수준을 보여주었다.

• 복식
• /
• 제58권2호
• /
• pp.120-133
• /
• 2008

The purpose of this study is to analysis types of light and to find the characteristics of light in contemporary fashion design. In a scientific context, light is electromagnetic radiation of a wavelength that has the characteristics of straightness, reflection, refraction, scattering and diffraction. But in philosophical speculations, light has been used as a metaphor of 'being', 'to-be' or 'enlightenment.' And through the ages, people have tried to represent and apply the light into plastic art like painting and architecture. The types of light in fashion design was categorized as those; reflective light from the surface of clothing which is the result of interaction between illumination and material, representative light as the pattern of light or light effect such as sun or its rays and optical or psychedelic patterns, luminescent light from light emitting material like phosphorescence or LED which combines into fashion design, projective light from a medium to reveal virtual patterns on the surface or a fashion design itself using holography. These lights in fashion design can be considered as reflection of emphasis of sexuality, longing for fantasy and mystique, visualization of interaction and communication and groping for the play.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.880-882
• /
• 2002

We have proposed a novel optical design technique of light-guide plates(LGPs) which can able to improve the optical efficiency of transflective LCDs. The basic concepts of our design technique are that we make the groove-pattern of LGP pixels resemble the pixel-array-pattern of transflective LCDs in shape and size and make the surface of the groove scatter (front scattering). In simulated and measured results, we ensure that our design of LGP in backlight unit for transflective LCDs can improve the optical efficiency of LCDs.

• 한국결정성장학회지
• /
• 제5권2호
• /
• pp.129-134
• /
• 1995

단결정 $KMnCl_3$, $LiNbO_3$ 및 $Mg-LiNbO_3$의 bulk 성질을 중성자 산란을 이용하여 측정하였다. 본 연구는 편광 빛을 사용하여 보이는 좋은 단결정이라도 이들의 bulk 성질을 정확히 파악하기 위하여는 중성자 산란으로 재측정하여야 함을 보여준다. 중성자 산란에서 나타나는 $KMnCl_3$, 의 큰 mosaic 분포는 이 결정이 단일 구역을 갖는 단결정이 아니고 축에 대해 작은 각으로 분포되어 있는 구역 군들이 상대적으로 여러 방향으로 존재함을 보여준다. $LiNbO_3$ 에서 나타는 작은 mosaic분포는 큰 구역들이 서로 가까이 정렬되어 있고 Mg가 첨가된 $LiNbO_3$ 는 잘 키워진 단결정으로 나타났다.

• 한국입자에어로졸학회지
• /
• 제8권3호
• /
• pp.111-120
• /
• 2012

In Daegu, a road cleaning system was constructed in the central part of the city and has been operated from April, 2011. We evaluated the effect of the system on the concentration of $PM_{10}$ at a roadside monitoring site. The ambient $PM_{10}$ concentration data were logged every 1 min for a period of 20 weeks from May to October, 2011, by means of light scattering method, and then every 5 min data were used in the statistical analysis. The measured data were verified by comparing them with beta-ray data obtained at the same site. Correlation coefficient between the two groups was highly significant (r=0.79), though the absolute levels of light scattering data appeared to be approximately 2.8 times higher than the beta-ray data. Diurnal, daily, weekly, and monthly variations of $PM_{10}$ data did not show any evidence of decreasing effect owing to the clean road system. A comparison of roadside $PM_{10}$ data with non-roadside data also revealed very similar pattern, implying the variation of the $PM_{10}$ concentrations is mainly affected by the traffic conditions near the monitoring site. However, if the operating conditions of the clean road system can be improved, i.e. increasing the frequency and duration of water cleaning, the road cleaning effect may improve the air quality indirectly by means of removing the resuspended particles from the road.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.136-137
• /
• 2001

LCD(Liquid Crystal Display)는 크게 투과형과 반사형으로 나눌 수 있으며 투과형 LCD의 전력소모중 약 70％를 차지하는 부분이 백라이트 유닛이다. 다른 차세대 도광판 연구와는 달리 경사면을 이용한 방법이 아니라 도광판 속에서의 산란을 조절하는 방식이다. 기존 도광판은 그림 1-(b)처럼 밑면에 dot pattern을 인쇄하여 dot의 크기, 001의 간격을 이용한 것이다. (중략)

• 한국광학회지
• /
• 제21권6호
• /
• pp.225-229
• /
• 2010

레이저로 가공된 평면산란패턴을 가지는 도광판은 도광판 상부로 방출되는 광이 광원과 가까운 부분에 편중되는 문제로 인해서 전체적인 휘도 분포가 균일하지 않은 문제점을 가지고 있었다. 이를 해결하기 위해 도광판 후면에 레이저를 이용하여 도광판 내부에서 특징적인 기울기를 가지는 산란패턴을 만듬으로써 도광판 상부로 방출되는 광의 균일도를 향상시키고자 하였다. 본 논문에서는 도광판 후면의 산란패턴을 간격과 가공 깊이를 다르게 조절하여 설계하고 이에 따른 도광판의 성능의 차이점을 가공전에 분석하고자 전산모사를 수행하였다. 본 논문에서 제안한 산란패턴을 가지는 도광판은 기존의 도광판의 휘도와 균일도에 비해 높은 향상을 가질 것으로 예상되는 바이다.

• 한국자동차공학회논문집
• /
• 제1권2호
• /
• pp.125-133
• /
• 1993

Electronic Speckle Pattern Interferometry(ESPI) using a CW laser, a video system and image processor was applied to the rotating displacement of rigid body. ESPI require no special surface preparation or attachments and displacements between any two arbitrary points on the surface can be measured. The characteristic speckle pattern formed when imaging a scattering surface illuminated by laser light retains phase information, which can be used for interferometric measurement of surface displacement. The application of this principle to measuring in-plane displacement resolved in one direction is described, together with the novel use of television equipment to detect and process the information contained in the speckle pattern. This is faster, and more convenient and versatile than customary photographic methods.

• 한국응용과학기술학회지
• /
• 제15권4호
• /
• pp.11-20
• /
• 1998

The propagation of light radiation in a turbid medium is an important problem that confronts dosimetry of therapeutic laser delivery and the development of diagnostic spectroscopy. Scattered light is measured as a function of the position(distance r, depth z) between the axis of the incident beam and the detection spot. Turbid sample yields a very forward-directed scattering pattern at short range of position from source to detector, whereas the thicker samples greatly attenuated the on-axis intensity at long range of position. The portions of scattered light reflected from or transmitted throughphantom depend upon internal reflectance and absorption properties of the phantom. Monte Carlo simulation method for modelling light transport in tissue is applied. It uses the photon is moved a distance where it may be scattered, absorbed, propagated, internally reflected, or transmitted out of tissue. The photon is repeatedly moved until it either escape from or is absorbed by the phantom. In order to obtain an optimum therapeutic ratio in phantom material, optimum control the light energy fluence rate is essential. This study is to discuss the physical mechanisms determining the actual light dose in phantom. Permitting a qualitative understanding of the measurements. It may also aid in designing the best model for laser medicine and application of medical engineering.