• Agricultural and Biosystems Engineering
• /
• 제6권1호
• /
• pp.8-14
• /
• 2005

This study was carried out to develop a real-time grouping system of chlorophyll contents of rice crop canopy for precision agriculture. The system measured reflected light energy of a rice canopy on a paddy field from visual to near-infrared range and analyzed the collected information of chlorophyll contents of rice crop canopy with given position data. The four filters, 560 nm $({\pm}10nm)$, 650 nm $({\pm}25nm)$, 700 nm $({\pm}12nm)$, and 850 nm $({\pm}40nm)$, were used for a multiple regression to estimate the chlorophyll contents of rice crop canopy. Every $0.2m^2$ area of the open field was inspected at a distance of 1 m above the rice canopy. According to the results of verification test, the chlorophyll content grouping by a commerical chlorophyll meter (SPAD) and by the developed system showed 58.7% match for five-stage chlorophyll contents of rice crop canopy grouping and 93.5% for the $five{\pm}1-stage$ grouping. In addition, the results showed 63.0% match for three-stage grouping and 100.0% for the $three{\pm}1-stage$ grouping.

• 한국염색가공학회지
• /
• 제23권2호
• /
• pp.76-82
• /
• 2011

Ultra High molecular weight polyethylene(UHMWPE) films were photooxidized by UV/ozone irradiation. Reflectance of the irradiated films decreased in the low wavelength regions of visible light, indicating destructive interference of visible light due to roughened surface. The UV treatment developed the nano-scale roughness on the UHMWPE films surface, which increased by two-fold from 82.6 to 156.6nm in terms of peak-valley roughness. The UV irradiation caused the oxygen content of the UHMWPE film surface to increase. Water contact angle decreased from $83.2^{\circ}$ to $72.9^{\circ}$ and surface energy increased from 37.8 to 42.6mJ/$m^2$ with increasing UV energy. The surface energy change was attributed to significant contribution of polar component rather than nonpolar component indicating surface photooxidation of UHMWPE films. The increased dyeability to cationic dyes may be due to the photochemically introduced anionic and dipolar dyeing sites on the film surfaces.

• 한국정보전자통신기술학회논문지
• /
• 제3권4호
• /
• pp.16-22
• /
• 2010

본 연구에서는 분광광도계 시스템에서 700-1,100 nm 근적외선 대역의 조명 영향평가에 대한 연구를 수행하였다. 분광광도계는 분자영상 의학 분야 및 의료용 장비에 다양하게 사용되고 있다. 근적외선 대역에서의 조명 영향평가를 알아보기 위하여 본 연구에서 사용한 색상지는 표준반사물질 및 만셀 표준 색상인 빨강, 노랑, 초록, 파랑 색상지를 사용하였다. 분광광도계 시스템의 근적외선 대역을 비교 분석하기 위하여 실험 재료 색상지를 색상지별 20번 측정하였고, 조명은 백열등, 형광등, 인버터 형광등 및 조명 조합으로 실험하였다. 백열등, 형광등, 인버터 형광등의 단일 조명에서는 백열등에서 가장 높은 분광반사율 반응을 보였고, 조명들의 조합에서도 백열등이 포함된 조명 조합이 높은 분광반사율을 보였다. 따라서 분광광도계의 근적외선 대역을 이용하여 분광광도시스템을 구축한다면, 분광반사율이 높은 백열등을 적용하는 것이 좋은 것으로 판단되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.444-445
• /
• 2007

IZO/Al multilayer anode films for flexible top emitting organic light emitting diodes (TOLEDs) were grown on PEN (polyethylen-enaphthelate) substrate using twin target sputter (TTS) system. To investigate electrical and optical properties of IZO/Al multilayer films, 4-point probe method and UV/Vis spectrometer were used, respectively. From a IZO/Al multilayer films with 100nm-thick Al, sheet resistance of $1.4{\Omega}/{\square}$ and reflectance of above 62% at a range of 500~550nm wavelength could be obtained, In addition, structural and surface properties of IZO/Al multilayer films were analyzed by XRD (X-ray diffraction) and FESEM (field emission scanning electron microscopy) and AES (auger electron spectroscope), respectively. Moreover, flexibility of IZO/Al multilayer anode films were examined by bending test method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.270-270
• /
• 2009

The surface texturing technology is one of the methods to improve the efficiency of crystalline silicon solar cell. This process reduced the reflectance at the surface by the so-called double bounce effect and increased the light trapping. Among these surface texturing technology, the laser texturing is effective for multi-crystalline silicon solar cells which have random crystallographic directions. We investigated the characteristics of laser processing on the surface of the multi-crystalline silicon solar cells using the fiber laser.

• 한국의류학회지
• /
• 제37권4호
• /
• pp.506-513
• /
• 2013

Rubia cordifolia L (Indian madder) contains red color purpurin (65-67%) and yellow color munjistin (10-12%) as well as nordamncanthal (9-10%). Purpurin is a traditional red dye. The purpose of this research is to increase the dyeability of silk and light fastness of dyed silk fabric. We dyed silk fabrics after pretreatment to remove the yellow component of madder using various solvents such as ethyl acetate, ethanol, methanol, chloroform, and acetone. The total K/S value was the highest in the case of chloroform and reflectance was the lowest at the red color region from 470nm to 530nm. Chloroform dissolved the yellow color of Rubia cordifolia; in addition, we found that the total K/S value increased and the ${\Delta}E$ value decreased by chloroform pretreatment for silk dyeing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.336-339
• /
• 1995

There has been considerable interest in electrochromic devices because of its potential application in automobiles including mirrors and windows. The electrochromic(EC) mirror can automatically control the amount of glare produced by headlights or other light source on either inside or outside mirrors. Therefore, the EC mirror can be a better alternative to todays day-night mirrors for automobiles. In this paper we have fabricated all solid state EC mirrors with glass-ITO / a-WO$_3$/ polymer electrolyte / a-V$_2$O$\sub$5/ / ITO-glass / Al structure and investigated their spectral reflectance as a function of applied voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1346-1348
• /
• 1998

Tungsten oxide($WO_3$) thin films were prepared by reactive magnetron sputtering in an $Ar/O_2$ atmosphere from a compressed powder $WO_3$ target and their electrochromic(EC) phenomena were investigated. PEO-$LiClO_4$-PC polymer electrolyte can easely be formed into thin films and showed high transmittance. Such electrolyte have electrochromic properties suitable for large-scale electrochromic devices. For the devices using $WO_3$ thin films of 1500, 2500, $4000{\AA}$ thickness with glass/ITO/$WO_3$/PEO-$LiClO_4$-PC/ITO/glass structure, an optical modulation of $50{\sim}60%$ were obtained at a potential range of $1{\sim}2V$. It has shown that transmittance and reflectance of light could be electrically controlled by low applied voltage.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.30-35
• /
• 2013

In order to increase cell efficiency in crystalline silicon solar cell, reduction of light reflection is one of the essential problem. Until now silicon wafer was textured by wet etching process which has random patterns along crystal orientation. In this study, high aspect ratio patterns are manufactured by nano imprint process and reflectance could be minimized under 1%. After that, screen printed solar cell was fabricated on the textured wafer and I-V characteristics was measured by solar simulator. Consequently cell efficiency of solar cell fabricated using the wafer textured by nano imprint process increased 1.15% than reference solar cell textured by wet etching. Internal quantum efficiency was increased in the range of IR wave length but decreased in the UV wavelength. In spite of improved result, optimization between nano imprinted pattern and solar cell process should be followed.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.156-157
• /
• 2000

The amplification method using evanescent wave coupling has a long history and has been widely used as a new lasing method, especially, in the waveguide optics$^{(1)}$ . In particular, it has been observed experimentally that when the light wave propagating in a dielectric medium is totally reflected at the planar interface between the dielectric and a pumped active medium, the reflectance may be greater than unity, i.e., amplification is possible$^{(2)}$ . There were several attempts by other authors to explain this enhanced internal reflection (EIR) classically$^{(3)}$ . They commonly introduced a complex refractive index for the active medium with its imaginary part being negative, and this scheme was also used to describe an amplification process in a waveguide having active-cladding region$^{(4)}$ . However these theories are phenomenological, using macroscopic constants, and therefore a microscopic theory is needed to understand EIR in a fundamental level. (omitted)