• 대한기계학회논문집A
• /
• 제32권3호
• /
• pp.267-273
• /
• 2008

The circular cylinder pipes are used in the many industrial areas. In this paper, the acoustic wave propagation in the pipe containing a gas is researched. First of all, the theory for the coupled acoustic wave propagation in a pipe is investigated. Acoustic wave propagation in pipe can not be occurred independently between the wave of the fluid and the shell. It requires complicated analysis. However, as a special case, the coupled wave in a high density pipe containing a light density medium is corresponded closely to the uncoupled in-vacuo shell waves and to the rigid-walled duct fluid waves. The coincidence frequencies of acoustic and shell modes contribute to the predominant energy transmission. The coincidence frequency means the frequency corresponding to the coincidence of the wavenumber in both acoustic and shell. In this paper, it is assumed that the internal medium is much lighter than the pipe shell. After the uncoupled acoustic wave in the internal medium and uncoupled shell wave are considered, the coincidence frequencies are found. The analysis is successfully confirmed by the verification of the experiment using the real long steel pipe. This work verifies that the coupled wave characteristic of the shell and the fluid is occurred as predominant energy transmission at the coincidence frequencies.

• 한국축산시설환경학회지
• /
• 제5권2호
• /
• pp.79-86
• /
• 1999

Recently more dairy farmers are interested in the utilization of stretch film for wrapping silage material. Most of stretch film are imported from abroad and one domestic product was developed, but its quality has not yet been tested. Therefore this study was executed to offer basic data on this material to the farmers. Measured items were tensile load, extension ratio, and tear propagation strength of stretch films. Comparisons were made among the white color of domestic product(Kw), and white(Fw), black (Fb) and green color(Fg) of foreign products. The result were summarized as follows: 1. Tensile loads of lengthwise direction in stretch films were 557.4, 377.4, 282.6 and 398.4kgf/$\textrm{cm}^2$ in Kw, Fw, Fb and Fg, respectively, and tensile loads of width direction were 415.9, 418.1, 360.2 and 433.0kgf/$\textrm{cm}^2$ in Kw, Fw, Fb and Fg, respectively. 2. Extension ratios of lengthwise direction were 650, 462.5, 512.5% and 537.5% in Kw, Fw, Fb and Fg, respectively, Extension ratios of width direction were 930, 962.5, 950 and 1,000% in Kw, Fw, Fb and Fg, respectively. 3 Tear propagation strength of lengthwise direction 187.9, 148.9, 157.3 and 142.8kgf/cm, and tear propagation strength of width direction were 141.4, 129.8, 140.4 and 106.6kgf/cm in Kw, Fw, Fb and Fg, respectively. 4. In the light transmittance, there was no difference between white and green color stretch film, but it was very low in black one. Therefore, it is thought that research on quality of roll bale silage treated with each stretch film would be needed.

• 생물환경조절학회지
• /
• 제5권1호
• /
• pp.23-33
• /
• 1996

시설하우스에 이용되는 시설자재의 규격화와 품질개선을 유도하기 위하여 피복자재의 종류별, 두께별로 물리적 기계적 특성을 시험 분석하였다. 피복재의 물리적 기계적 특성은 충격강도, 인장 인열강도 및 파장별 투과율을 측정하였으며, 시험한 결과를 요약하면 다음과 같다. 1. 다트식 낙추시험에서 연질필름의 충격 강도는 피복재가 두꺼울수록 파괴하중이 증가하여 50% 파괴수준의 하중이 158-213g 범위에 있었으며, LDPE 필름이 대체로 높게 나타났다. 2. 충격파괴정도를 보면 전혀 파괴되지 않는 최대 충격하중이 62-192g 범위였으며, 0.05mm에 비해 0.1mm 두께의 필름이 충격에 견디는 힘이 1.8-3.2배 더 강한 것으로 나타났다. 3. 인장하중은 0.95-2.22kg 범위로 피복재 길이 방향이 높고, LDPE 필름이 높게 나타났으며, 신장율은 345-1020% 범위로 길이보다 폭방향이 1.4-2.7배 더 신장되는 것으로 나타났다. 4. 인열강도는 80.S-121.7kg/cm의 범위로 LDPE 필름이 높고 EVA가 낮은 것으로 나타났으며, 길이방향보다 폭방향이 더 큰 값으로 나타났다. 5. 연질필름의 종류별 광투과특성은 자외선 영역에서 87-92%로 큰 차이가 나타나지 않았으나 가시광선 영역에서 높은 투광율을 나타내었다.

• 생물환경조절학회지
• /
• 제27권4호
• /
• pp.363-370
• /
• 2018

다육식물인 에케베리아(Echeveria)는 최근 전세계적으로 수요가 증가하고 있지만, 번식효율이 품종이나 환경요인의 영향을 크게 받으므로 연중 고품질 묘를 공급하는 것이 어렵다. 이 연구는 밀폐형 식물공장 내에서 LED 파장 조합이 에케베리아 엽삽번식 효율에 미치는 영향을 구명하여 주년 생산의 기초자료를 제공하고자 실시되었다. 번식이 어려운 'Afterglow(AG)', 'Berkeley Light(BL)', 'Mason(MS)', 'Subsessilis Light(SL)', 'Cream Tea(CT)', 'Ben Badis(BB)' 등 6품종의 모주로 부터 균일한 잎을 채취하여 실내온도 $24{\pm}2^{\circ}C$, 상대습도 $60{\pm}10%$의 식물공장 내에서 혼합상토에 삽목하였다. 청색(B, 450nm), 녹색(G, 530nm), 적색(R, 660nm), 원적색(FR, 730nm) LED를 이용하여 R10, R8+B2, R5+B5, R7+B2+FR1, R7+B2+G1의 비율로 광질을 달리하여 처리하였고, PPFD는 $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, 광주기는 16/8(명/암) 시간이었다. 그 결과, 번식 효율은 품종에 따라 차이가 있었는데, 'SL'은 상대적으로 발근과 신초 형성이 쉽게 되었으나, 'AG'는 발근과 뿌리 생장이 잘 되지 않았다. LED 파장 또한 번식효율에 영향을 주었는데, B 비율이 높은 R5+B5, R7+B2+FR1, R7+B2+G1 하에서 신초 형성과 생장이 촉진된 반면, 발근과 뿌리 생장은 억제되었다. 반대로, R 비율이 높은 R10나 R8+B2 하에서는 부정근 형성 및 생장이 촉진된 반면, 신초 형성 및 생장이 억제되었다. 한편, FR은 잎의 크기와 무게를 증가시켰다. 따라서, 번식이 어려운 에케베리아 품종의 엽삽 시 번식효율을 높이기 위해서는 각 파장별 효과를 활용한 적정파장 조성에 대한 연구가 필요하다.

• Current Optics and Photonics
• /
• 제3권2호
• /
• pp.105-110
• /
• 2019

The visible-light communication (VLC) system is a promising candidate to fulfill the present and future demands for a high-speed, cost-effective, and larger-bandwidth communication system. VLC modulates the visible-light signals from solid-state LEDs to transmit data between transmitter and receiver, but the broadcasting and the line-of-sight propagation nature of visible-light signals make VLC a communication system with a limited operating range. We present a novel architecture to increase the operating range of VLC. In our proposed architecture, we guide the visible-light signals through the fiber and amplify the dissipated signals using visible-light fiber amplifiers (VLFAs), which are the most important and the novel devices needed for the proposed architecture of the VLC. Therefore, we design, analyze, and apply a VLFA to VLC, to overcome the inherent drawbacks of VLC. Numerical results show that under given constant conditions, the VLFA can amplify the signal up to 35.0 dB. We have analyzed the effects of fiber length, active ion concentration, pump power, and input signal power on the gain and the noise figure (NF).

• 한국광학회지
• /
• 제10권2호
• /
• pp.174-177
• /
• 1999

FHD (Falme Hydrolysis Deposition) 공정으로 실리카 슬렙도파로를 제작하고 전송손실을 측정하였다. 전송손실 측정에는 프리즘커플링으로 빛을 입사시키고 굴절률 정합액으로 출사시키는 장치를 제작 사용하였다. 측정된 전송손실은 1300 nm 및 633 nm에서 각각 0.04 dB/cm 및 0.09 dB/cm의 값을 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.169-174
• /
• 2014

This paper proposes a novel beehive-shaped reflector for application to light-emitting diode (LED) transceivers for illumination and bi-directional visible light communication (VLC). By using a diffuse propagation model extended to line-of-sight and direct signals, the distribution of illuminance and the path loss of the transceiver are investigated to evaluate the performance of the beehive-shaped reflector. To verify bi-directional communication, a VLC-based image capture system, comprising a complementary metal-oxide semiconductor (CMOS) image sensor and video processor unit, is demonstrated. Real-time images captured by the CMOS camera are successfully transmitted to the monitoring system via a free-space channel at a rate of 115.2 kbps.

• 센서학회지
• /
• 제11권5호
• /
• pp.273-278
• /
• 2002

광섬유의 침입 감지기능을 개발하기 위하여 다중모드 GRIN(graded-Index) 광섬유의 휨에 의한 광섬유내의 광전파 특성변화를 고찰하였다. 다중모드 CRIN 광섬유의 data파는 기본(fundamental) 모드로, 침입 감시용 감시파는 높은 차수의 모드로 동시에 전파 되게 하고, 광섬유의 휨(bending)에 의한 데이타 유출시도는 높은 차수 모드의 감시파의 감쇠를 가져오고, 결국 수신측의 경보를 작동하도록 한다. 또한 일정한 곡률반경으로 감겨진 광섬유에 기본 모드만 선별적으로 주입된 경우에 있어서, 다중모드 GRIN 광섬유 내에서의 광파의 전파과정을 이론적으로 해석하고, 광섬유가 휘게 피는 경우 여러 모드 사이에 결합(coupling)이 생겨나게 되는데, 광섬유가 감겨진 곡률반경을 변경해가면서 결합되는 기본모드의 power 변화를 수치해석을 이용한 프로그램 시뮬레이션을 통하여 조사하였다. 이 연구결과는 광섬유의 휨에 의하여 방출되는 데이타 도청 및 침입자 감지에 다중모드 GRIN 광섬유 활용 가능성과 광섬유의 곡률반경이 1cm 정도가지는 Asawa-Taylor의 모델[4]이 정당함을 보였다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 춘계학술대회
• /
• pp.44-44
• /
• 2019

This study aimed to develop a suitable method for inducing the proliferation of prothallus and producing sporophytes of rock polypody (Polypodium vulgare L.). The prothalli used in all experiments were obtained from spore germination and sub-cultured for 8-week intervals. The most appropriate media for prothallus propagation were investigated by culturing 300 mg of prothallus in MS ($1/4{\times}$, $1/2{\times}$, $1{\times}$, and $2{\times}$ strength) medium and in Knop medium for 8 weeks. Cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $30{\pm}1.0{\mu}mol-m-2{\cdot}s-1$, and a photoperiod of 16/8 h (light/dark). Fresh weight of prothalli was 4.8 g on $1{\times}$ MS, 4.5 g on $1/2{\times}$ MS and 4.3 g on 1/4 MS medium. To select a suitable soil combination for sporophyte formation, 1.0 g of prothallus was ground with distilled water, spread in five combinations onto different soil substrates (decomposed granite, horticultural substrates, peat moss, and perlite), and then cultivated for 13 weeks. The sporophyte cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $43{\pm}2.0{\mu}mol-m-2{\cdot}s-1$, humidity of $84{\pm}1.4%$, and a photoperiod of 16/8 h (light/dark). The results showed that a mixture containing a 2:1 (v:v) ratio of horticultural substrate and perlite, increased sporophyte formation to 462.5 sporophytes per pot (7.5 cm2). The other soil substrates produced from 314.5 to 405.3 sporophytes per pot. Therefore, our results will provide conditions suitable for mass production of Polypodium vulgare L.

• 센서학회지
• /
• 제28권6호
• /
• pp.341-344
• /
• 2019

Liquid crystal (LC) mesophase materials manifest a variety of phase transitions. The optical properties of LCs are highly dependent upon the phase and orientation of the optical axis with respect to the polarization of incoming light. Studying the LC phase transitions is significantly important for a wide range of scientific and industrial applications. In this study, we demonstrate the propagation velocity of the phase boundary between the nematic and isotropic phase of 4-Cyano-4-pentylbiphenyl (5CB) liquid crystal for different electric fields using a polarized optical microscope. The results demonstrate that the propagation velocity of the phase boundary exhibits a peak value for a specific voltage, attributed to the supercooling of the isotropic phase of the LC. The analysis of the propagation velocity for different electric fields also provides a simple optical platform to measure the thermal anisotropy and voltage dependent thermal properties of the homogeneously aligned LC.