• Tribology and Lubricants
• /
• 제15권1호
• /
• pp.29-38
• /
• 1999

In recent years, the tribological behavior of coated ceramic material has been the issue of much interest. Particularly, the understanding of the tribological performance of thin film under light load is important for its potential in applications of MEMS. The friction and wear behavior of ceramic material that occur at light load depends on several factors such as surface roughness, contact area and material properties. In this work, the tribological behavior of coated silicon under light load and low speed was investigated. Particularly, the effects of coated materials, humidity and undulated surface were also studied. The results show that the effect of humidity on fiction was influenced by the apparent area of contact between the two surfaces. Also both adhesive and abrasive wear occurred depending on the sliding condition. Finally, undulations on the silicon wafer were found to be effective in trapping wear particles and resulted in the reduction of friction.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.125-129
• /
• 1999

This paper dealt with effect of dual component and micropartical retention system on papermaking. First-pass retention under dynamic drainage condition was studied in neutral and alkaline papermaking system. Cationic starches, amphoteric starches and amphoteric polyacrylamide were added prior to high shear force, then anionic. The system is found to be very useful to inprove filler retention. For mitigating unfavorable effect of interfering sub-stances, anionic trash catcher(ATC) such as p-DADMAC was tested in this study.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.107-120
• /
• 1999

Catalytic converters are the most fascinating and complicated chemical reactors. They are most often operated in the transient state with respect to composition, flow rate, temperature, etc. The mathermatical model developed in this work accounts for simultaneous heat and mass transfer, chemical reaction, and multi dimensional flow characteristics to analyze the light-off performance of monolithic catalytic converter with comparable mass flow rate. To validate the mathematical model, comparison between experimental and numerical results has been performed. The numerical results show a good agreement with experimental data. It is forund that inflow rate shows major effect on the characteristics of termal response of catalytic converter.

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2000년도 춘계수산관련학회 공동학술대회발표요지집
• /
• pp.153-154
• /
• 2000

Many bioactive photosensitizers have been isolated from plants and some of theses possess antiviral activities which, depend on UVA(320-400nm) and visible light. Many complex quinonoids have been isolated from plants and recently some of them, such as hypericin and hypocrellin, have been shown to possess light-dependent antiviral activities. these compounds only exert their desired biological activities in the presence of long wavelength ultra-violet UVA but these activities are also strongly influenced b chemical structure(Hudson et al, 1995). the importance of light in the use of certain medicinal plant extracts has been appreciated, if not understood, for centuries. Also, many seaweed extracts will effect photo(UVA, visible light) for algicidal activity. (omitted)

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.184-187
• /
• 2014

This study examined the effects of particle size on the light scattering of a nano-sized color filter pigment used to obtain a range of colors in liquid crystal displays. The contrast ratio is one of the most important characteristics of liquid crystal displays. When a color filter is located between two crossed polarizers, the size of the pigment can give rise to a decrease in the contrast ratio due to Rayleigh scattering by the nanoparticles in the filter. The size effect of the color filter pigment on the contrast ratio was investigated in terms of the depolarization parameter. As an experimental result, the depolarization parameter increased with decreasing pigment size. Therefore, a smaller pigment size can reduce light leakage caused by light scattering in the color filter between two crossed polarizers. The depolarization function was also proposed as a useful function for predicting the decrease in the contrast ratio of the color filter.

• Elastomers and Composites
• /
• 제48권3호
• /
• pp.221-224
• /
• 2013

가시광촉매가 처리된 자동차내장재의 VOC 분석방법에 있어서 샘플백에 충진하는 질소 대신 공기를 충진하여 시험하였다. 그 결과 자동차내장재의 VOC 분석시 질소를 충진한 샘플백은 VOCs 및 폼알데히드의 저감효과가 나타나지 않았다. 그러나 질소대신 공기를 충진한 샘플백에서는 VOCs 및 폼알데히드가 현저하게 감소하였으며 자동차 내장재의 VOCs 분석시 샘플백에 질소 대신 공기를 충진하여야 가시광촉매에 의한 효과를 발휘할 수 있다는 것을 확인하였다.

• 한국정밀공학회지
• /
• 제25권1호
• /
• pp.85-91
• /
• 2008

White light scanning interferometry has gotten a firm position in 3D surface profile measuring field. Recently, the LCD industry gave a chance for this technology to enter into real industry fields. It is known that white-light phase-shifting algorithm give a best resolution compare to other algorithms, but there are some problems to be resolved. One of them is 300nm jump in height profile, called bat-wing effect. The main reason of this problem is an ambiguity of phase-peak detection algorithm, and some solution has been proposed, but it didn't work perfectly. In this paper, I will show the cases when these effects are occurred, and these height discrepancies will be almost disappeared when broad-band illuminators are used.

• International Journal of Quality Innovation
• /
• 제4권2호
• /
• pp.50-64
• /
• 2003

During IC inspection, which includes the two parts of Mark and Lead, the deviation of IC on the tape occurring in high speed movements usually generates light reflection effect, which in turn causes errors in IC recognition as measured by machine vision system. This research filters the light reflection effect by developing standard components, identifies the correct position of IC Lead, hence fixes the measurement errors or non-measurability caused by light reflection, avoids the resulting discontinued operation of measuring system, and improves the productivity.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.52-55
• /
• 2011

We discuss the effect of stray light on a high-precision camera in an LEO(Low Earth Orbit) satellite. The critical objects and illumination objects were sorted to discover the stray light sources in the optical system. Scatter modeling was applied to determine a noise effect on the surface of a detector, and the relative flux of a signal and noise were also calculated. The stable range of reflectivity of the beam splitter was estimated for various scattering models.

• 한국환경과학회지
• /
• 제23권9호
• /
• pp.1573-1581
• /
• 2014

This study was conducted to examine the effect of LED light quality and supplemental LED light on growth and flowering for potted flowering plant of Kalanchoe. 1. Plant height of Kalanchoe was enhanced under Red, regardless of treatment time. 2. Root length and stem diameter of Kalanchoe were enhanced by Red+Blue. 3. The number of internodes was not influenced by LED light quality. Length of flower stalk of Kalanchoe increased under Red+Blue, but treatment time did not result in statistically significant differences. 4. Leaf area was not influenced by LED light quality in Kalanchoe. 5. The number of flower buds and open flowers was decreased by LED light treatment, but days to flowering was reduced by Red+Blue for 4 hr after sunset in Kalanchoe. 6. Chlorophyll and anthocyanin content was not significantly affected by LED light treatment, but anthocyanin content tended to increase by Blue 4 hr after sunset. 7. Fresh and dry weight did not increased by LED light treatment in Kalanchoe.