• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.335-342
• /
• 2003

지반 변형계수를 측정하는 방법중에서 원위치 시험법은 반력으로 대형 장비가 필요하고 많은 측정시간이 소요되므로 시험횟수가 제한되는 단점이 있다. 최근에는 이런 문제점을 보완하고 보다 신속하게 측정할 수 있는 장비들이 개발되어 적용되고 있다. 즉, Falling Weight Deflectometer(FWD), Light Drop Weight Tester(LDWT), Geogauge등이 있다. 이중에서 Light Drop Weight Tester(LDWT)는 경부 고속철도 공사에 ‘철도공사를 위한 경량 낙하 시험기’라는 명칭으로 적용된 이래로 여러 기관에 도입되어 노반의 품질관리 및 성토관리용으로 국내 조건에 맞는 기준을 정립하기 위한 연구가 진행중이다. 본 연구에서는 현장에서 지반변형계수를 쉽게 측정하는 방안을 제안하기 위해 독일 Stendal의 동적 평판 재하시험 장비(Light Drop Weight Tester(LDWT))인 ZFG 02를 이용하여 현장과 토조에서 동적변형계수를 측정하였다. 동일한 지반에서 실시한 평판재하시험 결과에 의한 정적 변형계수와의 상관성을 분석하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.250-254
• /
• 2011

Main role of landing gear is to absorb the energy which is generated by aircraft lanidng and ground maneuvering. Generally, in order to absorb the impact energy during landing, oleo-pneumatic type shock absorber is used for aircraft landing gear. Oleo-pneumatic type shock absorber has a good energy absorbing efficiency and is light in weight because its structure is relatively simple. For the landing gear development, it is necessary to conduct drop test in order to verify shock absorbing performance. In the drop test, first, gas spring curve verification tests are conducted. Then, limit and reserve energy absorption drop tests are performed based on the STANAG 4671. The drop tests results with performance analysis results are presented.

• Earthquakes and Structures
• /
• 제17권6호
• /
• pp.567-575
• /
• 2019

In order to investigate the dynamic impact resistance of steel fiber reinforced full light-weight concretes, we implemented drop weight impact test on a total of 6 reinforced beams with 0, 1 and 2%, steel fiber volume fraction. The purpose of this test was to determine the failure modes of beams under different impact energies. Then, we compared and analyzed the time-history curves of impact force, midspan displacement and reinforcement strain. The obtained results indicated that the deformations of samples and their steel fibers were proportional to impact energy, impact force, and impact time. Within reasonable ranges of parameter values, the effects of impact size and impact time were similar for all volumetric contents of steel fibers, but they significantly affected the crack propagation mechanism and damage characteristics of samples. Increase of the volumetric contents of steel fibers not only effectively reduced the midspan displacement and reinforcement strain of concrete samples, but also inhibited crack initiation and propagation such that cracks were concentrated in the midspan areas of beams and the frequency of cracks at supports was reduced. As a result, the tensile strength and impact resistance of full light-weight concrete beams were significantly improved.

• Carbon letters
• /
• 제16권4호
• /
• pp.241-246
• /
• 2015

Rapid industrial development in recent times has increased the demand for light-weight materials with high strength and structural integrity. In this context, carbon fiber-reinforced plastic (CFRP) composite materials are being extensively used. However, laminated CFRPs develop faults during impact because CFRPs are composed of mixed carbon fiber and epoxy. Moreover, their fracturing behavior is very complicated and difficult to interpret. In this paper, the effect of the direction of lamination in CFRP on the absorbed impact energy and impact strength were evaluated, including symmetric ply (0°/0°, −15°/+15°, −30°/+30°, −45°/+45°, and −90°/+90°) and asymmetric ply (0°/15°, 0°/30°, 0°/45°, and 0°/90°), through drop-weight impact tests. Further, the thermal properties of the specimens were measured using an infrared camera. Correlations between the absorbed impact energy, impact strength, and thermal properties as determined by the drop-weight impact tests were analyzed. These analyses revealed that the absorbed impact energy of the specimens with asymmetric laminated angles was greater than that of the specimens with symmetric laminated angles. In addition, the asymmetry ply absorbed more impact energy than the symmetric ply. Finally, the absorbed impact energy was inversely proportional to the thermal characteristics of the specimens.

• 한국산림과학회지
• /
• 제108권3호
• /
• pp.322-328
• /
• 2019

본 연구는 임도 유지관리 및 보수를 위한 기초자료를 제공하기 위하여 경상북도 영양군 임도를 대상으로 동평판재하시험(light drop weight test), 들밀도 시험 및 입도분석을 이용하여 개설시기 및 횡단위치별(성토부 차륜부(T0), 노면 중앙부(C), 절토부 차륜부(T1))에 따른 임도노반 지지력 분석을 실시하였다. 들밀도 및 입도분석결과, 들밀도는 2011년 개설임도가 $2.0694g/cm^3$으로 가장 높은 값을 나타냈으며, 2017년 개설임도가 $1.7443g/cm^3$으로 가장 낮은 값을 나타내었다. 입도분석은 2017년 개설임도에서 큰 골재의 비율이 가장 높게 나타났으며, 시기가 늦어질수록 큰 골재의 비율이 줄어드는 경향을 나타냈다. 동평판재하시험결과, 2011년 개설임도 $E_{vd}$가 평균 $35.9MN/m^2$, 2014년은 평균 $31.1MN/m^2$, 2016년은 평균 $26.7MN/m^2$, 2017년은 평균 $23.7MN/m^2$로 2011년 개설임도가 가장 높은 $E_{vd}$를 나타냈다. 또한 성토 차륜부는 평균 $21.2MN/m^2$, 절토 차륜부는 평균 $36.71MN/m^2$ 그리고 중앙부는 평균 $29.8MN/m^2$로 절토 차륜부가 가장 높은 $E_{vd}$를 나타냈다.

• 한국지반공학회논문집
• /
• 제28권9호
• /
• pp.85-95
• /
• 2012

유기산 재료를 이용한 지반 개량은 미생물을 배양하여 지반의 고결화로 인해 친환경적으로 지반의 강도를 증대시키는 방법으로 다양한 토질 성상에 대해 유기산 재료를 혼합 후 미생물 증식으로 강도 증대효과를 규명한 바가 있으나, 현재까지 현장 적용성을 평가한 바가 없다. 본 논문에서는 유기산재료를 이용하여 지반의 미생물 증식으로 인한 지반 고결화에 대해 연구를 실시하였으며, 이를 위해 재령 56일까지 동평판재하시험, 동적콘관입시험, 들밀도시험, SEM-EDS분석을 통해 지반강도의 변화에 대해 규명하였다. 시험 결과, 유기산 재료를 첨가한 지반의 강도와 강성은 증가하는 경향을 나타냈으며, SEM-EDS로부터 탄산칼슘의 증가를 규명할 수 있었다. 향후 유기산 재료를 활용한 친환경적인 지반개량 공법의 지속적인 연구와 관심이 필요하다고 사료된다.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.349-357
• /
• 2018

An extensive research was undertaken to study the vibration serviceability of a long-span and light-weight floor subjected to human loading experimentally and numerically. Specifically, heel-drop test was first conducted to capture the floor's natural frequencies and damping ratios, followed by jumping and running tests to obtain the acceleration responses. In addition, numerical simulations considering walking excitation were performed to further evaluate the vibration performance of a multi-panel floor under different loading cases and walking rates. The floor is found to have a high frequency (11.67 Hz) and a low damping ratio (2.32%). The comparison of the test results with the published data from the 1997 AISC Design Guide 11 indicates that the floor exhibits satisfactory vibration perceptibility overall. The study results show that the peak acceleration is affected by the walking path, walking rate, and adjacent structure. A simpler loading case may be considered in design in place of a more complex one.

• Computers and Concrete
• /
• 제22권1호
• /
• pp.123-132
• /
• 2018

Reinforced concrete (RC) columns which are the main vertical structural members are exposed to several static and dynamic effects such as earthquake and wind. However, impact loading that is sudden impulsive dynamic one is the most effective loading type acting on the RC columns. Impact load is a kind of impulsive dynamic load which is ignored in the design process of RC columns like other structural members. The behavior of reinforced concrete columns under impact loading is an area of research that is still not well understood; however, work in this area continues to be motivated by a broad range of applications. Examples include reinforced concrete structures designed to resist accidental loading scenarios such as falling rock impact; vehicle or ship collisions with buildings, bridges, or offshore facilities; and structures that are used in high-threat or high-hazard applications, such as military fortification structures or nuclear facilities. In this study, free weight falling test setup is developed to investigate the behavior effects on RC columns under impact loading. For this purpose, eight RC column test specimens with 1/3 scale are manufactured. While drop height and mass of the striker are constant, application point of impact loading, stirrup spacing and concrete compression strength are the experimental variables. The time-history of the impact force, the accelerations of two points and the displacement of columns were measured. The crack patterns of RC columns are also observed. In the light of experimental results, low-velocity impact behavior of RC columns were determined and interpreted. Besides, the finite element models of RC columns are generated using ABAQUS software. It is found out that proposed finite element model could be used for evaluation of dynamic responses of RC columns subjected to low-velocity impact load.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.157-164
• /
• 2022

Representative bulletproof materials, such as aramid or ultra-high molecular weight polyethylene(UHMWPE), have excellent strength and modulus in the plane direction but are very vulnerable to forces applied in the thickness direction. This paper reports a study on the effects of reinforcement in the thickness direction when bulletproof composite fabrics are prepared to improve their performance. Aramid and UHMWPE fabrics were combined using the film-bonding, needle-punching, or stitching methods and then subjected to low-velocity projectile and ball-drop impact tests. The results of the low-velocity projectile test indicated that the backface signature(BFS) decreased by up to 29.2% in fabrics obtained via the film-bonding method. However, the weight of the film-bonded fabric increased by approximately 23% compared with that obtained by simple lamination, and the fabric stiffened on account of the binder. Flexibility, light weight for wearability, and excellent bulletproof performance are very important factors in the development of bulletproof materials. When the needle-punching method was used, the BFS increased as the fibers sustained damage by the needle. When the composite fabrics were combined by stitching, no significant difference in weight and thickness was observed, and the BFS showed similar results. When a diagonal stitching pattern was employed, the BFS decreased as the stitching density increased. By contrast, when a diamond stitching pattern was used, the fabric fibers were damaged and the BFS increased as the stitching density increased.

• 항공우주기술
• /
• 제12권1호
• /
• pp.213-220
• /
• 2013

국가우주개발계획에 따라 2020년 이후 한국형 달탐사선이 발사될 예정이다. 달탐사선은 무인 경량화모델로 달궤도선과 달착륙선 2종을 개발할 계획이다. 달탐사선의 구조체는 발사 및 궤도하중, 착륙하중을 견딜 수 있는 구조적 안정성과 탑재장비의 장착공간을 제공할 뿐만 아니라 발사체의 탑재능력을 고려하여 가볍게 설계되어야 한다. 이를 위해 달탐사선 구조체의 개발과 관련된 핵심기술의 선행개발이 요구된다. 특히, 달착륙선의 경우 착륙선이 달 지면에 안전하게 착륙할 수 있게 해주는 착륙장치의 개발기술이 필수적이다. 본 논문에서는 달착륙선 지상시험모델 구조체의 설계, 제작, 시험을 포함한 개발내용을 다룬다.