• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.55-66
• /
• 2016

This study was carried out to investigate the effect of artificial light sources with different light qualities on the growth and flowering characteristics of a herbaceous long-day plant, Petunia ${\times}$ hybrida Hort. Seedlings of petunia cultivar 'Madness Rose' were potted, acclimated for one week, and grown in a phytotron equipped with tube- and bulb-type fluorescent lamps (FL tube and bulb), tube-type white light-emitting diodes (LED tube), halogen lamps (HL), metal halide lamps (MH), and high pressure sodium lamps (HPS) for 10 weeks. The temperature, photoperiod, and photosynthetic photon flux density (PPFD) in the phytotron were $22{\pm}2^{\circ}C$, 16 h, and $25{\pm}2{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. Light sources combined with HL promoted stem elongation, and plant height and internode length decreased with increasing red to far-red (R:FR) ratio. FL tube + LED tube, HPS, and FL tube promoted branching, whereas plants grown under light sources combined with HL did not have any branches. Days to flowering (from longest to shortest) occurred as follows: FL tube + HL > FL tube + HL > MH > HPS = FL tube + FL bulb > FL tube + LED tube > LED tube > FL tube, indicating that reducing the R:FR ratio of the light sources promoted flowering. Only 20% of plants grown under an FL tube flowered, whereas under all other treatments, 100% of plants flowered. At 10 weeks after treatment, plants grown under HPS and MH had (cumulatively) 12 open flowers, and those grown under FL tube + FL bulb, LED tube, FL tube + LED tube, and HPS treatment had approximately seven flower buds. These results suggest that light sources with low R:FR ratios promote flowering and stem elongation in petunia, but they reduce its ornamental value due to overgrowth and poor branching.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.325-336
• /
• 1997

The purpose of this study was to evaluate the compensation effect of exposure duration increase to decreased light intensity of visible-light curing unit. The specimen with 2mm thickness was made of Restorative $Z-100^{TM}$ (A2 shade, 3M Dental Products, U.S.A.) and cured with $Optilux^{TM}$ (Demetron Research Co. U.S.A.). The light intensity was controlled to 420 $mW/cm^2$, 540 $mW/cm^2$, 630 $mW/cm^2$ and curing time, also, controlled to 40, 60, 80 seconds. Cured specimen was stored in a light-proof container for 24 hours to post-irradation was completed. Microhardness of top and bottom surface of specimen were measured to evaluate the depth of cure. The obtained results were as follows: 1. The microhardness of top and bottom surface of the composite resin specimen was increased significantly as light intensity and exposure time was increased (P<0.01). 2. Light intensity was more correlated with bottom microhardness(${\gamma}{\geq}$0.438) than top microhardness(${\gamma}{\geq}$0.213), and exposure time was more correlated with top microhardness (${\gamma}{\geq}$0.424) than bottom microhardness(${\gamma}{\geq}$0.335). 3. The regressive equation was obtained in this study as follows : $H=0.07{\times}D+0.012{\times}I+76$ (H : Microhardness(KHN), D : Exposure time, I : Light intensity)

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.88-96
• /
• 2024

This study was conducted to determine the optimal light conditions for the in situ and ex situ conservation and restoration of Osmanthus insularis, a rare plant species in South Korea. Evaluations included the growth performance, leaf morphological features, photosynthetic characteristics, and photosynthetic pigment contents of seedlings grown from April to November under different light conditions (100%, 55%, 20%, and 10% relative light intensity). The shoot lengths and root collar diameters did not differ significantly with relative light intensity. The dry weights of leaves, stems, and roots and the leaf number were highest at 55% relative light intensity. The leaf shape showed morphological acclimation to light intensity, with leaf area decreasing and thickness increasing as the relative light intensity increased. Several leaf parameters, including photosynthetic rate and stomatal conductance at light saturation point, net apparent quantum yield, and dark respiration, as well as chlorophyll a, chlorophyll b, and carotenoid contents, were all highest at 55% relative light intensity. Under full light conditions, the leaves were the smallest and thickest, but the chlorophyll content was lower than at 55% relative light intensity, resulting in lower photosynthetic ability. Plants grown at 10% and 20% relative light intensity showed lower chlorophyll a, chlorophyll b, and carotenoid contents, as well as decreased photosynthetic and dark respiration rates. In conclusion, O. insularis seedlings exhibited morphological adaptations in response to light intensity; however, no physiological responses indicating enhanced photosynthetic efficiency in shade were evident. The most favorable light condition for vigorous photosynthesis and maximum biomass production in O. insularis seedlings appeared to be 55% relative light intensity. Therefore, shading to approximately 55% of full light is suggested for the growth of O. insularis seedlings.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.928-934
• /
• 2008

The objective of this study is to investigate the dyeing properties of safflower yellow dye on silk for the standardization of dyeing process and color reproducibility. Yellow colorants were water-extracted from safflower petals, concentrated, and freeze-dried to obtain colorants powder. The effects of dye concentration, dyeing temperature, and pH of dye bath were studied in terms of dye uptake and shade. Fastness to dry cleaning and light was evaluated. Dye uptake increased with raising temperature and brighter and more vivid yellow shade was obtained when dyed at $30^{\circ}C$. As colorants concentration increased, dye uptake increased progressively and the shade got darker and deeper. Maximum color strength was obtained at pH 3.5. It was speculated that the adsorption of colorants seemed to occur mainly by hydrogen bonding and physical force at pH 5.5 and by ionic bonding as well as hydrogen bonding below isoelectric point(pH 3.8-4.0). The results of reproducibility test showed acceptable color difference in the range of $1.11{\sim}2.01$. Washing fastness was fairly good as 4/5 rating, while light fastness was 2/3 rating.

• Journal of Plant Biology
• /
• v.33 no.2
• /
• pp.111-118
• /
• 1990

In order to characterize the chloroplasts of Korean ginseng as a semi-shade plant and radish as a sun plant, effects of growth light intensity on photosynthetic electron transport (PS) activity in chloroplasts and superoxide (O2.-) production in thylakoid membrane by irradiation were investigated. High-light chloroplasts of both plants showed higher PS activities than those grown under ow growth light intensity. High PS II and low PS I activities in ginseng chloroplasts (ratio of PS II/PS I : 1.1) were observed, but radish chloroplasts showed low PS II and high PS I activities (ratio of PS II/PS I : 0.3). PS II activity of both plants was little affected by temperature in range of 15-35$^{\circ}C$. Activities of whole -chain (PS II+I) in ginseng and PS I in radish were increased at high temperature (4$0^{\circ}C$). Preincubation of chloroplasts at 4$0^{\circ}C$ during 30 min, as a mild heat stress, caused rapid decrease in PS II and PS II+I activities of both plants. However PS I activity was not decreased in ginseng and rather increased in radish. O2.- production (NBT reduction) in Mehler reaction in the thylakoid membrane was inhibited by DCMU in both plants. DMBIB inhibited O2.- production in ginseng, but radish was insensitive to DMBIB. Electron flow system in ginseng thylakoid membrane was more susceptible to damage of photooxidation than that of radish.

• Journal of Korean Society of Forest Science
• /
• v.94 no.4 s.161
• /
• pp.236-242
• /
• 2005

Phytochrome B (PhyB) gene, which is a photoreceptor that controls plant growth under various light conditions, was cloned from Chinese hybrid poplar 'Soohang 1'. Nucleotide sequence and deduced amino acid sequences PhyB cDNA of 'Soohang' is consisted with 3,456 nucleotides and 1,156 amino acids. The cloned PhyB fragment showed 98% homology of amino acid sequences with Populus balsamifera PhyB1. According to Northern blot analysis. PhyB was up-regulated by light, while PhyB transcript was not detected under dark condition. According to this study, the cloned PhyB is induced by light and functions as photoreceptor.

• KIEAE Journal
• /
• v.16 no.5
• /
• pp.47-55
• /
• 2016

Purpose: As the energy consumed by buildings increases, there is a growing need for studies and technology development to address this issue. One of the solutions to excessive energy use by buildings is the light-shelf, which is a natural lighting system enabling efficient reduction in light energy, and research in this area has been intensive. However, most of the studies about the light-shelf are limited to the light environment, and thus the application of their findings to an actual environment in the form of a design may be problematic. Therefore, the purpose of the present study is to provide fundamental data for light-shelf design by carrying out a light-shelf performance evaluation on the basis of the light environment and the heating and cooling environment. Method: In the present study, a testbed was established to conduct a light-shelf performance evaluation by measuring the electric power consumption of lighting and heating and cooling devices depending on the existence of a light-shelf and its angle. Result: The findings of the present study are as follows: 1) With respect to the uniformity of the indoor light environment amenity, the optimum angle of a light-shelf was found to be $30^{\circ}$ for the summer solstice and the winter solstice. 2) With respect to the reduction of electric power consumption by indoor lighting devices, the optimum light-shelf angle at the summer solstice is $30^{\circ}$, at which time electric power consumption may be reduced by 10.2% in comparison with when no light-shelf is applied. However, at the winter solstice, a light-shelf may increase the energy consumption for lighting in comparison with when no light-shelf is applied, and this should be taken into account in the design of a light-shelf. 3) In terms of reducing the electric power consumption of heating and cooling devices, the optimum angle of a light-shelf was found to be $30^{\circ}$ for the summer solstice, while a light-shelf is inappropriate for the winter solstice since a light-shelf creates shade and thus increases the heating energy consumption. 4) To summarize the findings above, the optimum angle of a light-shelf is $30^{\circ}$ for the summer solstice, but the installation of a light-shelf may in some circumstances increase the energy consumed by lighting devices as well as by heating and cooling devices. Therefore, more studies and technology development may need to be performed to solve the problem of increased energy consumption at the winter solstice.

• Korean Journal of Environmental Biology
• /
• v.34 no.4
• /
• pp.264-271
• /
• 2016

The objective of this study was to determine the growth and light utilization efficiency of garden plants in shade area through chlorophyll fluorescence reaction analysis. Ten garden plants was grown for 75 days under 50% and 80% shading conditions. Under shading, $ET2_O/RC$, the fluorescence parameter related to electron-transport in photosystem II, was effectively enhanced. However, the electron transport flux until PSI acceptors per reaction center ($RE1_O/RC$) was reduced. These changes in photochemical parameters evoked a decrease in performance index (PI) and driving force (DF) of electron transport flux. In addition, some photochemical parameters such as $F_V$, $FV/F_O$, $RE1_O/RC$, $ET2_O/RC$, $PI_{TOTAL\;ABS}$, and $DF_{TOTAL\;ABS}$ were found to be important for shade tolerance. Three species (Pachysandra terminalis Siebold & Zucc, Physostegia virginiana L., and Carex maculata Bott) were found to be shade tolerant. Based on these results, shading factor index (SFI) deduced from photochemical parameters is useful for evaluating of shading stress of garden plants.

• Asian Journal of Turfgrass Science
• /
• v.25 no.1
• /
• pp.52-58
• /
• 2011

In order to investigate an artificially transition method of perennial ryegrass(Lolium perenne L. 'Accent') overseeded on zoysiagrass (Zoysia japonca Zenith') with Kerb (3,5-jichloro-N (1,1-dimethyl-2-propynyl). We observed turfgrass growth and physiological responses of the two turfgrasses under the shading treatments. The experiment was conducted in greenhouse during April- August. Shading was generally using a black shade net product whose the shade level was done into 0, 35 and 75%, actual light intensities were 589, 378 and $135\;{\mu}mol{\cdot}m^{-2}{\cdot}s$ PAR, respectively. The four levels of Kerb treatment were 0, 0.1 0.2, and $0.4\;g{\cdot}m^{-2}$. As shading was getting increased, growth of perennial ryegrass was increased slowly, but zoysiagrass was reduced and almost all of experiments showed significant differences statistically. Perennial ryegrass exhibited inclination that growth was reduced in more than Kerb $0.4\;g{\cdot}m^{-2}$ by shades. On the other hand, it was shown that the growth of zoysigrass was reduced by shades largely and it was not effected by Kerb. Through this study, it was determined that Kerb is effective for elimination of overseeded perennial ryegrass on zoysiagrass. Moreover, when excluding perennial ryegrass under the condition like shade, it is desirable for treating high concentration more than the basic processing amount.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.514-523
• /
• 2004

Statement of problem: All-ceramic restorations have been advocated for superior esthetics. Various post and core systems have been used to improve the strength of damaged teeth, but it is unclear whether they affect the final shade of finished all-ceramic restorations. Purpose: The influence of different types of post and core systems on light transmission through all-ceramic crowns was assessed by spectrophotometric analysis. Also the masking effect of different thickness of ceramic ingot was evaluated. Material and Methods : Forty-five sample disks (15mm in diameter) at several thickness(1.0, 1.5, 2.0mm) and value(shade 100, 200, 300) were made in heat pressed ceramic(IPS-Empress). Background specimens simulating gold-alloy cast posts(Type III casting gold alloy), metal posts(Ni-Cr casting alloy) and ceramic posts(CosmoPost) were fabrica-ted. Resin composite(Z250, A3 shade) was used as a tooth substrate reference. For each combination, the change in color was measured with a spectrophotometer. Readings were performed for 2 conditions (1) ability of ceramic to mask the core in relation to its thickness(1.0, 1.5, or 2.0mm) ; (2) influence of post and core types on the final color of the ceramic. Data were recorded according to the CIE $L^*a^*b^*$ systems and color difference($\Delta$E) was calculated. Results: 100 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post larger than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5mm, only $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 2. 200 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post was smaller than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5 mm, only the $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. 300 shade ingot: when ceramic thickness was 1.0mm, only $\Delta$E value for metal was larger than 2 and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 1.5mm, $\Delta$E values for all specimens was smaller than 1. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. Conclusion: The final esthetic result of the IPS-Empress glass-ceramic restoration was not affected by the presence of different core materials when the thickness was more than 2.0 mm. When ceramic thickness decreases to 1.5mm, it is advised to take the substrate aspects into consideration. If the ceramic thickness is less than 1.0mm, using the tooth color matched substrate is strongly recommended.