• 전자공학회논문지
• /
• 제53권11호
• /
• pp.48-55
• /
• 2016

노트북, 테블릿 PC 및 스마트폰 등의 휴대 기기를 위한 디스플레이의 전력소모를 낮추기 위해, 주변 밝기에 따라서 디스플레이의 밝기를 조정할 수 있는 광 센서 시스템을 연구하였다. 또한, 휴대 기기의 복잡도와 비용에 크게 영향을 주지 않도록, 광 센서 시스템을 디스플레이 패널에 일체형으로 구현하고자 했으며, 이를 위해서 저온 다결정 실리콘 박막트렌지스터를 이용하여 패널에 광 센서와 신호취득 회로를 집적하고자 했다. 주변 밝기를 감지하는 광 센서의 패널 간 편차를 별도의 공정 설비없이 신뢰성 있게 보정할 수 있도록, 새로운 보정 방식을 제안하였다. 이와 더불어 최종 데이터를 디지털화하기 위한 아날로그-디지털 변환기를 포함한 신호취득 회로를 제안하고 검증하였다. 제안하는 회로는 집적하기에 적합하도록 간단한 구동 신호로 동작되며, 인식 가능한 입력 밝기는 10에서 10,000 lux까지이다. 제안하는 신호취득 회로의 신호취득 주파수는 100Hz이며, 20개의 출력 레벨에 대한 최대 차등 불균일 오차는 0.5 LSB 이하이다.

• Journal of the Optical Society of Korea
• /
• 제20권5호
• /
• pp.586-592
• /
• 2016

This paper proposes a luminance compensation method using optical sensors to achieve high luminance uniformity of active matrix organic light-emitting diode (AMOLED) displays. The proposed method compensates for the non-uniformity of luminance by capturing the luminance of entire pixels and extracting the characteristic parameters. Data modulation using the extracted characteristic parameters is performed to improve luminance uniformity. In addition, memory size is optimized by selecting an optimal bit depth of the extracted characteristic parameters according to the trade-off between the required memory size and luminance uniformity. To verify the proposed compensation method with the optimized memory size, a 40-inch 1920×1080 AMOLED display with a target maximum luminance of 350 cd/m² is used. The proposed compensation method considering a 4σ range of luminance reduces luminance error from ± 38.64%, ± 36.32%, and ± 43.12% to ± 2.68%, ± 2.64%, and ± 2.76% for red, green, and blue colors, respectively. The optimal bit depth of each characteristic parameter is 6-bit and the total required memory size to achieve high luminance uniformity is 74.6 Mbits.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.759-762
• /
• 2005

The LGP(Light Guide Panel) for the back light unit that is used to the 2.2" TFT LCD was designed and fabricated. The method of the pattern design which is the most important in the design of the LGP was converted the V-cutting method into the Dot method. This newly developed Dot method provided a good uniformity in the brightness at the LGP, which was a very difficult problem to solove in the V-cutting method. The experiment result of the newly designed LGP shows the brightness uniformity 90% and the brightness 3656 $cd/\;m^2$ which is 20% higher than the commercial products.

• Journal of Information Display
• /
• 제11권1호
• /
• pp.28-32
• /
• 2010

A mini-projector prototype employing a LED light source, a nontelecentric structure, and an LCOS panel for application in the integrated 3D display was fabricated. A seamless image was obtained by tilting an array of mini-projectors. Seamless quality was created by the excellent uniformity of the projection intensity on the mini-projector's screen, which was simulated as 98.34%. Great uniformity can be realized by optimizing the design of the light source and the optics configuration, which is the key to such realization.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1487-1490
• /
• 2005

This study proposes a controller with the techniqu e of voltage -compensated driver for producing grayscaled pictures on passive matrix organic light emitting diodes (PMOLEDs) panels; especially, the controller overcomes the problem of luminance nonuniformity on displaying pictures. Because the controller is a voltage type driver, the output impedance of the driver is much less than that of the current-type driver. Hence, the controller provides a better electron-optical response than those of traditional current drivers. An area compensated look-up table (ACLUT) is designed in data feeding paths for removing luminance non-uniformity; thus, the proposed controller provides nearly 95% luminance uniformity.

• 대한전자공학회논문지
• /
• 제25권1호
• /
• pp.88-93
• /
• 1988

For coherent optical information processing the thickness uniformity of the spatial light modulators(SLMs)is highly demanded. The liquid crystal display(LCD), which is commercialized as a pocket-sized television, is considered as one of the most cheap 2-dimensional SLM. But usually it has lack of thickness uniformity. Thus phase correction to compensate the thickness nonuniformity must be preceded before it is used as an SLM. In this paper relatively easy phase compensation method applicable to binary SLMs is discussed and experimentally verified by using the optical joint transformantion concept.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1564-1565
• /
• 2007

In comparison with CCFL, LED can have more various colours. The research into BLU to raise colour reproducibility is actively proceeding by using RGB LED. On this study, Direct BLU was designed by white LED and RGB LED. According to the result of the experiment, the colour uniformity degree of BLU model using white LED is better than RGB LED BLU. On the other hand, the colour reproducibility of RGB LED BLU is better than white LED. The research showed that the uniformity of white LED is 81.7%and RGB LED is 70.01%.

• Journal of the Optical Society of Korea
• /
• 제17권6호
• /
• pp.506-512
• /
• 2013

Recently, the color separation issue of wide-spreading white LEDs has attracted attention due to their wide applicability as light sources in direct-lit LCD backlights. These wide-spreading LED packages usually consist of LED chips, a color-conversion phosphor layer, and a light-shaping lens. The technical aspect of this color issue was related to a method for balancing the yellow spectral component emitting from phosphors with respect to the blue one from the LED chip as a function of viewing angle. In this study, we suggested an approach for carrying out quantitative analysis for the color separation problem occurring in wide-spreading LED packages by optical simulation. In addition, the effect of an internal scattering layer on the color uniformity was investigated, which may be considered as a potential solution for this problem.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8901-8907
• /
• 2015

기존의 가로등은 배광특성 조절이 어려워 주변 환경 및 도로의 상황에 따라 빛을 고루 전달하지 못하므로, 눈부심, 농작물 결실저해 및 수면 방해 등의 광공해를 발생시키고 있는 실정이다. 본 논문에서는 이러한 문제를 해결하기 위해 주변 환경 및 도로 상황에 따라 조사되는 빛의 각도를 조절할 수 있는 새로운 구조의 LED 가로등 기구를 제안 하였다. 제안된 LED 가로등 기구는 반원구조의 형상을 갖는 각도 조절 장치를 이용하여 도로의 종류 및 특성에 따라 배광특성을 조절 할 수 있도록 하였다. 측정 및 모의실험결과 배광각도는 최소 $100^{\circ}$에서 최대 $154^{\circ}$까지 조절이 가능함을 확인하였고, 평균조도는 KS 규정의 15%를 초과하였으며, 종합 균제도는 KS 규정의 50% 이상을 초과하여 성능이 우수함을 확인할 수 있었다. 따라서 본 연구를 통하여 개발된 대용량 LED 가로등 기구는 광공해를 해소하고 광원 분포의 균제도 최적화와 눈부심을 최소화 할 수 있을 것으로 사료된다.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.487-492
• /
• 2012

In this study we researched a spotlight in LED lighting. Ordinary LED spotlight was manufactured with characterized property of traveling straightness of LED light source, but multiple use of shell type LED, a yellow band has formed caused by light source interference between the LED. Also, there was a high miscellaneous light efficiency with losing light source homogeneity and efficiency due to light source control uneasiness. The study uses aspheric reflector and aspheric lens, so we can control the light source of LED spotlight with effectively and we reached surface light source by using COB/COM for LED module. Furthermore it can change its use by a reduced scale of light system. It has been designed to make its various application from low power consumption of bicycle lamp, up to high power consumption of automobile lamps and lighthouse.