• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.87-103
• /
• 1999

Purpose: This study was undertaken to quantitatively estimate the degree of the damage and recovery of the irradiated rat condylar cartilage using the Image Analyzer. Materials and Methods: Experimental animals were 16 male rats of the Sprague-Dawley strain at the age of 20 day irradiated with the dose of 10 Gy in their head and neck region. Four rats were sacrificed at the each of the following time intervals - 1, 4, 7 and 14 days, respectively. The same number of control group animals were sacrificed at the each age of 21. 24, 27 and 34 days, respectively. The specimens were stained with 0.5％ toluidine blue and examined with light microscope. The condylar cartilage was divided into 4 zones; fibrous zone, proliferating zone, upper hypertrophic zone, and lower hypertrophic zone. And then, the proliferating zone was subdivided into 2 layers - upper and lower layer, and upper and lower hypertrophic zone were subdivided into three layers, respectively - upper, middle and lower layer. With the aid of Image Analyzer, morphometric analysis was performed. The thickness, the numerical density of cells, the cell area density, the extracellular matrix area density, the mean area of single cell, the mean area of extracellular matrix per single cell were measured and analysed. Results: In the experimental group, the thickness of the fibrous zone was slightly increased and that of the proliferating zone and the upper and the lower hypertrophic zone was markedly decreased. With time, the thickness of the fibrous zone was gradually increased and that of the proliferating zone and the upper and the lower hypertrophic zone was steadily in the decreased state. The numerical density of cells of the proliferating zone was increased on post-irradiated 1 day, but decreased after post-irradiated 4 day, and that of the upper hypertrophic zone was decreased. The numerical density of cells of the lower hypertrophic zone was decreased in the early stage and then was decreased or not significantly different from that of the control group with time. In the experimental group, the cell area density of the fibrous zone and the proliferating zone was decreased in the early stage and then gradually increased or not significantly different from that of the control group with time. The cell area density of the upper and the lower hypertrophic zone was varied with time. The extracellular matrix area density value were totally opposite to the cell area density values: The mean area of single cell of the fibrous zone and the proliferating zone was .decreased on post-irradiated 1 day, and increased after post-irradiated 4 day. The mean area of single cell of the upper hypertrophic zone was varied with each layer and time. In the experimental group, the mean area of extracellular matrix per single cell of the fibrous zone was not significantly different with control group, and that of the proliferating zone was decreased on post-irradiated 1 day, and increased after post-irradiated 4 day. The mean area of extracellular matrix per single cell of the lower hypertrophic zone was increased in the early stage. and that of upper hypertrophic zone was varied with each layer and time. Conclusion: The condylar cartilages of rats were affected by irradiation, but the changes were vaned with each layer and time. By morphometric analysis. the changes of the cells of the condylar cartilage of irradiated rat could be calculated quantitatively.

• Journal of the Korean association of regional geographers
• /
• v.5 no.2
• /
• pp.47-117
• /
• 1999

This study concern with the pattern of Pusan Station shopping district within Pusan City, Korea, one of the special functioned shopping district within Pusan City. This paper will serve as a part of series studies which attempt to clarify the internal structure of Pusan as a whole. Part(II) of this study deals with the functions including living related, restaurants and others. The pattern of floors, size of shops, street corners and widths of streets were also analysed. The results are as follows: 1. In terms of numbers of firms in living related function, Pusan Station shopping district is the $7{\sim}8th$ ranked central place among nine the highest centers within Pusan City. Pusan Station shopping district has not much promoted vertical spatial differentiation comparatively, and also it's intensity of land use is the lower among nine the highest centers. It is presented that intimate relationship between intensity of vertical land use and classes of central places within the city. The ratio of inns and hotels in Pusan Station shopping district is third ranked in Pusan City. And the size of inns and hotels in this area is the most largest among the nine highest ranked central places within Pusan City. These presented that the traditional characteristics of station area as a special functioned shopping district. Inns and hotels mainly located along the narrower and back street. And it forms agglomerated areas or 'an alley of inns' at the inner parts of blocks, some like a 'hidden flower'. In Korea, 'alley' means that an area of specialization gains the prestige, traditionally. 2. Restaurants mainly locate along the narrower and back streets. And agglomerated areas of restaurants coincide with the agglomerated area of drinking places. It shows that these two kinds of functions need the same locational conditions. The ratio of Chinese restaurants is the highest in the Pusan Station shopping district. It's due to the agglomerated area these kinds of restaurants at the 'China town'. 3. Pusan Station shopping district has been formed along the streets within the residential areas. It's means that this shopping district now at the initial or middle growth era in development stage of shopping areas. 4. In general, wholesales and light manufacturing are located at peripheries within shopping district. But in Pusan Station shopping district, it dose not appear these spatial pattern. It shows that this area is lower ranked central place and not much progressed in spatial differentiation. 5. Particular firms which customers and workers have stayed more longer period of time are located at the far from the first floor. This vertical spatial differentiation is similar to the horizontal sequences. 6. Firms which have more ability of rental payment are located at street comers such as banks and pharmacies. In Pusan Station shopping district commercial facilities could not invade into the second third floors at narrower streets and first floor of back streets, still now.

• Journal of Korean Public Health Nursing
• /
• v.13 no.1
• /
• pp.97-113
• /
• 1999

To investigate the actual condition of the adult-smoking in Chinan County. I used self-reporting questionnaires among 923 residents living in nine districts selected at random among the sites of eleven eup-myons from December 28. 1998 to January 6. 1999. collected data and analyized using SPSS. The smoking rate of adults in Chinan County was $36.9\%$. There was a significant difference in smoking rate according to the age. gender, education and job among general characteristics. The smoking rate in group of above 40s was about $40\%$ and that of the male took $55.5\%$ which was higher than that of female and the smoking rate of the people having high-school education was the highest$(46.2\%)$. With regard to the career. the smoking rate of the farmers ranked first$(46.1\%)$. Therefore anti-smoking business for smokers should be focused on above 40 years old, males. people having high school education and farmers. As the result of the survey of smoking habits of 340 people who smoke currently, the average smoking begining age was 21.8 and $81.5\%$ among them was between 16-25 years old. $4.4\%$ was under 15. during around the elementary school. Most motives to smoke were as followed; curiosity or taste$(33.6\%)$, relief of stress $(31.2\%)$, peer presure$(26.5\%)$ And considering the amount of the cigarette which is smoked per day, the case which is less than a pack of cigarettes was highest as $75.5\%$ and the people who smoke over one pack of cigarettes took $24.5\%$. As for the kind of tobacco which is smoked, how to smoke and the desire for the smoking, most case was toxin was moderate$(47.8\%)$ or mild$(46.9\%)$. shallowly$(49.0\%)$ or deeply$(46.3\%)$ and under stress$(33.4\%)$. after meals$(27.8\%)$, during drink$(15.7\%)$ and so on. The highest point marked among the factors of smoking motives was 'the reduce of negative emotion' $(3.27\pm1.00)$. followed by 'uncomfortable habits' $(2.87\pm1.02)$, 'addiction' $(2.84\pm1.06)$. 'habit' $(2.74\pm1.12)$. 'pleasure' $(2.70\pm1.04)$. 'stimulus' $(2.59\pm.90)$, 'sensation-exercise satisfaction' $(2.42\pm.97)$. Smokers smoke to reduce the negative emotions when angry in most common case. depressed. anxious. uncomfortable. lone. ashamed or embarrased. and intend to solve the certain problem. etc. Other motives are uncomfortable habit. addiction. habit. pleasure and the pursuit of stimulus. The level of nicotine dependence of adults m Chinan County was 10.57 which amount to 'high' wholly. As the resulf of the level of nicotine dependence score. the people who are low in the level of nicotine was $33.5\%$. the people who are high was $48.2\%$. very high was $18.4\%$. The approach for anti-smoking for smokers should be conducted differently according to the level of the nicotine. For the people who are in low level of nicotin dependence the prohibition of the smoking should be guided through the approach to foster strong will. for those who are in 'high' by acquiring proper method for the prohibition of smoking. and for those who are 'very high' the anti-smoking should be induced by providing proper program because of the possibility of the suffer from abstinence syndrome. The difference of the level of nicotine with the general characteristics of the objects had not statistically significant difference. The difference of the level of nicotine dependence accompanied by smoking habit had statistically significant difference according to the amount of smoke, the kind of tobacos. smoke inhale habit. In other words, the group of heavy smokers had higher level of the nicotine dependence than that of the light smokers relatively and the group which smoke strong taboaco has higher level of nicotine than that of which smoke mild or moderate. And the group of smokers who smoke deeply has higher level of nicotine than that who smoke shallowly or nonswallow. Aa a result of the analysis of the correlation between smoking motive factors and the level of nicotine, there was the indication that people who smoke for the decrease of the negative emotion. habit, pleasure. stimulus. sensation-exercise satisfaction had high level of the nicotine dependence. As the result of the anti-smoking will of smokers. $65.0\%$ of them had prohibition of smoking will. $29.3\%$ had no will to quit smoke. The most important reason for anti-smoking was health. $67.9\%$ had experience to try to quit smoke and the biggest reason to fail to quit smoking was the lack of the will power to keep anti-smoking. $52.8\%$ of them were advised to stop smoking from their spouses or children. only $2.8\%$ were by medical. The people who have the opinion to need anti-smoking education were $69.6\%$. Therefore when the business for the hygine of the mouth for adult is set. it should be centered on the people who have intention of prohibition of the smoking and help to quit smoking by way of other affirmative counter-program not smoking under stress.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.453-457
• /
• 2016

This study investigates the hatching periods and hatchability of the eggs of Pochazia shantungensis at different collection times from 2011 to 2014, and the effect of temperature on the growth of P. shantungensis nymphs in an area of its outbreak. The hatchability of P. shantungensis eggs varies with their collection time; their hatchability in late November was higher than that in March of the next year, but no difference was observed in their hatching periods. The hatching periods of the eggs were 51.2, 31.3, 24.8, 19.4, 17.1, and 19.4 days at 15, 18, 21, 24, 27, and $30^{\circ}C$, respectively. The hatchability was above 70% at temperatures ranging from 18 to $27^{\circ}C$. The hatching time of the overwintered eggs in the Gurye region in Korea was reduced by 9 days from 2011 to 2014. The hatching rate was relatively higher when the average temperature in the winter season was relatively warmer. The dvelopmental periods of the first to fifth nymphs were 82.8, 58.0, 45.8, and 39.6 days at 18, 21, 24, and $27^{\circ}C$, respectively, at the relative humidity of 40~70%, and a photoperiod off 14 h light:10 h dark. The higher the temperature, the shorter the developmental period. At $30^{\circ}C$, all life stages after the fourth nymph died. Thus, the optimum growth temperature was estimated to be $27^{\circ}C$. For all life stages from the egg to the fourth nymph, the relationship between the temperature and developmental rate was expressed by the linear equation Y = 0.0015 X - 0.014. The lower developmental threshold was $9.3^{\circ}C$ and the effective cumulative temperature was 693.3 degree-days. The lower developmental threshold of approximately $3.8^{\circ}C$ was the lowest at the fourth nymph stage.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.395-402
• /
• 2011

The nanomechanical properties of fully lithiated and unlithiated silicon nanowire deposited on silicon substrate have been studied with atomic force microscopy. Silicon nanowires were synthesized using the vapor-liquid-solid process on stainless steel substrates using Au catalyst. Fully lithiated silicon nanowires were obtained by using the electrochemical method, followed by drop-casting on the silicon substrate. The roughness, derived from a line profile of the surface measured in contact mode atomic force microscopy, has a smaller value ($0.65{\pm}0.05$ nm) for lithiated silicon nanowire and a higher value ($1.72{\pm}0.16$ nm) for unlithiated silicon nanowire. Force spectroscopy was utilitzed to study the influence of lithiation on the tip-surface adhesion force. Lithiated silicon nanowire revealed a smaller value (~15 nN) than that of the Si nanowire substrate (~60 nN) by a factor of two, while the adhesion force of the silicon nanowire is similar to that of the silicon substrate. The elastic local spring constants obtained from the force-distance curve, also shows that the unlithiated silicon nanowire has a relatively smaller value (16.98 N/m) than lithiated silicon nanowire (66.30 N/m) due to the elastically soft amorphous structures. The frictional forces of lithiated and unlithiated silicon nanowire were obtained within the range of 0.5-4.0 Hz and 0.01-200 nN for velocity and load dependency, respectively. We explain the trend of adhesion and modulus in light of the materials properties of silicon and lithiated silicon. The results suggest a useful method for chemical identification of the lithiated region during the charging and discharging process.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.224-243
• /
• 2014

This study examined the materials and casting technology(cast, alloy, etc.) used in the manufacturing of bronze artifacts based on old literature such as Yongjae Chonghwa, Cheongong Geamul, and The Korea Review. In the casting experiment for restoration of Sangpyong Tongbo, a bronze and brass mother coin mold was made using the sand mold casting method described in The Korea Review. The cast was comprised of the original mold plate frame, wooden frame, and molding sand. Depending on the material of the outer frame, which contains the molding sand, the original mold plate frame can be either a wooden frame or steel frame. For the molding sand, light yellow-colored sand of the Jeonbuk Iri region was used. Next, the composition of the mother alloy used in the restoration of Sangpyong Tongbo was studied. In consideration of the evaporation of tin and lead during actual restoration, the composition of Cu 60%, Zn 30%, and Pb 10% for brass as stated in The Korea Review was modified to Cu 60%, Zn 35%, and Pb 15%. For bronze, based on the composition of Cu 80%, Sn 6%, and Pb 14% used for Haedong Tongbo, the composition was set as Cu 80%, Sn 11%, and Pb 19%. The mother coin mold was restored by first creating a wooden father coin, making a cast from the wooden frame and basic steel frame, alloying, casting, and making a mother coin. Component analysis was conducted on the mother alloy of the restored Sangpyong Tongbo, and its primary and secondary casts. The bronze mother alloy saw a 5% increase in copper and 4% reduction in lead. The brass parent alloy had a 5% increase in copper, but a 4% and 12% decrease in lead and tin respectively. Analysis of the primary and secondary mother coin molds using an energy dispersive spectrometer showed that the bronze mother coin mold had a reduced amount of lead, while the brass mother coin mold had less tin. This can be explained by the evaporation of lead and tin in the melting of the primary mother coin mold. In addition, the ${\alpha}$-phase and lead particles were found in the mother alloy of bronze and brass, as well as the microstructure of the primary and secondary coin molds. Impurities such as Al and Si were observed only in the brass mother coin mold.

• Korean journal of applied entomology
• /
• v.58 no.2
• /
• pp.89-99
• /
• 2019

In total, 654,362 adult mosquitoes were captured using black light traps in Gangwon-do Province of the Republic of Korea from 2012 to 2017. The collected mosquitoes were identified to the species level, placed in pools of up to 50 mosquitoes each, by species and date of collection, and screened for flaviviruses using a reverse transcription-polymerase chain reaction assay. A total of 276,224 adult mosquitoes were grouped in 7,721 pools for virus testing, and 68 flavivirus positive pools (0.9%) were detected. Flavivirus-positive products were confirmed by DNA sequencing. Japanese encephalitis viruses were detected in single pools collected from Chuncheon (2012, 2017: Culex pipiens, 2,728 and 1,111 mosquitoes, respectively), Hoengseong (2013: Culex orientalis, 19), and Gangneung (2017: C. pipiens, 724). All the Japanese encephalitis viruses detected were revealed as genotype V. Chaoyang viruses were detected in 63 pools of 5,055 Aedes vexans nipponii and a single pool of 585 C. pipiens collected in Gangwon-do Province from 2012 to 2017. Chuncheon was the region with the highest minimum infection rates (MIR, 0.32) and maximum likehood estimate (MLE, 0.33; confidence interval (CI) 95%, 0.23-0.46) of A. vexans nipponii for Chaoyang virus, followed by Hoengseong (MIR 0.30, MLE 0.30, CI 0.16-0.52) and Gangneung (MIR 0.21, MLE 0.21, CI 0.13-0.31). Monthly MIR and MLE values of A. vexans nipponii for Chaoyang virus were the highest in October (MIR 0.38, MLE 0.38, CI 0.07-1.25).

• Korean Journal of Ecology and Environment
• /
• v.52 no.3
• /
• pp.179-191
• /
• 2019

Heavy metals in stream water and sediments around industrial complex were studied in order to assess the contamination and to identify the potential source of metals. High variability has been observed for both dissolved and particulate phases in stream water with coefficient of variation (CV) ranging from 1.3 to 2.8. The highest metal concentrations in both phases were observed in Gunja for Ni and Cu, in Jungwang for Zn and Pb and in Shiheung for Cd, respectively. These results indicate that the different metal sources could be existing. The concentrations of the heavy metals in sediments decreased in the order of Cu>Zn>Pb>Cr>Ni>As>Cd>Hg, with mean of 2,549, 1,742, 808, 539, 163, 17.1, 5.8, $0.07mg\;kg^{-1}$, respectively. Mean of metal concentrations(except for As) in sediments showed the highest values at Shiheung stream comparing with other streams. In sediments, the percent exceedance of class II grade that metal may potentially harmful impact on benthic organism for Cr, Ni, Cu, Zn, Cd, Pb was about 57%, 62%, 84%, 60%, 68%, 81% for all stream sediments, respectively. Sediments were classified as heavily to extremely polluted for Cu and Cd, heavily polluted for Zn and Pb, based on the calculation of Igeo value. About 59% and 35% of sediments were in the categories of "poor" and "very poor" pollution status for heavy metals. Given the high metal concentrations, industrial wastes and effluents, having high concentrations of most metals originated from the manufacture and use of metal products in this region, might be discharged into the stream through sewer outlet. The streams receive significant amounts of industrial waste from the industrial facilities which is characterized by light industrial complexes of approximately 17,000 facilities. Thus, the transport of metal loads through streams is an important pathway for metal pollution in Shihwa Lake.

• (The) Research of the performance art and culture
• /
• no.34
• /
• pp.355-382
• /
• 2017

In this study, pieces of statements of sinawi successors, which served the ground of sinawi theory of Lee(that are found only in reports and theses) were searched from notebooks or cassette tapes of Lee. Then, this study tried to trace the process that the theory of sinawi was established based on the fieldwork of sinawi and relevant data, and to shed light on the significance. With the understanding from the early days that life of minsokak can be found in musical scenes in the region, Lee wandered around the scenes of minsokak(folk music) in the nation, recorded minsokak, and collected dialogues with successors of minsokak with about 2,000 cassette tapes and 300 notebooks. Especially, in the fieldwork data on sinawi that Lee possesses contain dialogues with the newly found sinawi successors that Lee found in the scene of sinawi in Gyeonggido province, Jeollado province, and Gyeongsangdo province over numerous visits for over 20 years from the early 1970s. Sometimes the record includes improvised sinawi performance. As the fieldwork of sinawi by Lee was conducted comparatively early, there are a lot of testimonies of successors who remember the sinawi scene of the past. Using these data, Lee published theories related to sinawi on reports and theses. His representative thesis is about 'Sinawi Chung'(1979). After listening to the testimony of Younghee Ji, the master of Gyeonggi haegeum sinawi in his first fieldwork of sinawi, he started his research on sinawi chung of piri, daegeum, and haegeum in Gyeonggido province and Honam area. Based on the testimonies on sinawi chung of 11 sinawi successors, Lee published 'Sinawi Chung'. In 1987, he extended the scope his research to sinawi-kwon(圈), which includes Gyeongnam area, found 12 new sinawi successors in Gyeonggi, Honam, and Gyeongnam areas, and based on their testimonies, complemented the theory of sinawi chung and published it. Fortunately, most of the dialogues with sinawi successors quoted in his reports or theses are recorded in his notebooks or cassette tapes. When these data are released, it is expected that a new theory of sinawi or minsokak will be born.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.1
• /
• pp.41-50
• /
• 2022

In this paper, a method to directly calculate the major elements of skin color such as melanin and hemoglobin from the RGB signal of the camera is proposed. The main elements of skin color typically measure spectral reflectance using specific equipment, and reconfigure the values at some wavelengths of the measured light. The values calculated by this method include such things as melanin index and erythema index, and require special equipment such as a spectral reflectance measuring device or a multi-spectral camera. It is difficult to find a direct calculation method for such component elements from a general digital camera, and a method of indirectly calculating the concentration of melanin and hemoglobin using independent component analysis has been proposed. This method targets a region of a certain RGB image, extracts characteristic vectors of melanin and hemoglobin, and calculates the concentration in a manner similar to that of Principal Component Analysis. The disadvantage of this method is that it is difficult to directly calculate the pixel unit because a group of pixels in a certain area is used as an input, and since the extracted feature vector is implemented by an optimization method, it tends to be calculated with a different value each time it is executed. The final calculation is determined in the form of an image representing the components of melanin and hemoglobin by converting it back to the RGB coordinate system without using the feature vector itself. In order to improve the disadvantages of this method, the proposed method is to calculate the component values of melanin and hemoglobin in a feature space rather than an RGB coordinate system using a feature vector, and calculate the spectral reflectance corresponding to the skin color using a general digital camera. Methods and methods of calculating detailed components constituting skin pigments such as melanin, oxidized hemoglobin, deoxidized hemoglobin, and carotenoid using spectral reflectance. The proposed method does not require special equipment such as a spectral reflectance measuring device or a multi-spectral camera, and unlike the existing method, direct calculation of the pixel unit is possible, and the same characteristics can be obtained even in repeated execution. The standard diviation of density for melanin and hemoglobin of proposed method was 15% compared to conventional and therefore gives 6 times stable.