• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.145-148
• /
• 2010

White organic light emitting devices were fabricated to improve the stability through a structural change using the two peak emission method. The fabricated devices were composed of indium tin oxide (100 nm)/ $\alpha$-NPD (30 nm)/4,40-bis(2,20-diphenylvinyl)-1,10-biphenyl (DPVBi, d: variable)/DPVBi: Rubrene (40 nm)/2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline(5 nm)/ $Alq_3$(5 nm)/ Al (100 nm). A DPVBi for blue emissions was used as the host material in the emitters. The doping concentration of the Rubrene was fixed at 2.0% (by weight). The white emission with Commission Internationale De L'Eclairage coordinates of (0.3342, 0.3439) occurred at 14 V with a thickness d of 1 nm. It was insensitive to the drive voltage, and the devices had a maximum luminance of $211\;cd/cm^2$. At 19 V, the current density and maximum external quantum efficiency were $173\;mAcm^2$ and 0.478%, respectively.

• 한국표면공학회지
• /
• 제46권2호
• /
• pp.93-97
• /
• 2013

We studied the emission characteristics of white phosphorescent organic light-emitting diodes (PHOLEDs), which were fabricated using a two-wavelength method. To optimize emission characteristics of white PHOLEDs, white PHOLEDs with co-doping and blue/co-doping emitting layer (EML) structures were fabricated using a host-dopant system. The total thickness of light-emitting layer was 25 nm and the dopant of blue and red was FIrpic and $Bt_2Ir(acac)$ in UGH3, respectively. In case of co-doping structure, applying micro lens array film showed efficiency improvement from the current efficiency 78.5 cd/A and power efficiency 40.4 lm/W to the current efficiency 131.1 cd/A and power efficiency 65 lm/W and blue / co-doping structure showed efficiency improvement from the current efficiency 43.8 cd/A and power efficiency 22 lm/W to the current efficiency 69 cd/A and power efficiency 32 lm/W.

• 한국응용과학기술학회지
• /
• 제18권4호
• /
• pp.292-297
• /
• 2001

Zinc complexes with Bis[2-(o-hydroxyphenyl) benzothiazolato ligands (ZnPBS-0) and Bis[2- (o-hydroxynaphthyl) benzothiazolato ligands (ZnPBS-05) were synthesized, and luminescent properties of these materials were investigated. The emission band found that it strongly depends on the molecular structure of introduced ligand and was tuned from 525 nm to 535 nm by changing the ligand structures. Spreading of the ${\pi}-conjugation$ in 2-(o-hydroxyphenyl) group gives rise to a blue shift. On the other hand, spreading of the ${\pi}-conjugation$ in benzothiazole groups leads to a red shift. The EL properties also showed good consistency with their differences of ligand structure. Bright-blue EL emission with a maximum luminance of 8300 $cd/m^{2}$ at 11V was obtained from the organic light - emitting diodes (OLEDs) using ZnPBS-0 as emitting layer. It was also found that the newly synthesized materials were suitable to be used as emitting materials in organic EL device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.277-280
• /
• 2007

Field emission-back light unit (FE-BLU) was fabricated using carbon nanotube (CNT) emitter. Local dimming and local brightening techniques were achieved, which results in very high contrast ratio. In addition, the motion blur phenomenon, one of the serious problems of liquid crystal display (LCD) with cold cathode fluorescent lamp (CCFL)-BLU, was removed from LCD-TV by using FE-BLU.

• 한국진공학회지
• /
• 제15권6호
• /
• pp.556-562
• /
• 2006

플라즈마 디스플레이 패널은 양극과 음극사이의 방전공간을 가진 많은 방전 셀로 구성되어 있다. 네온과 제논가스로 채워진 이 방전공간에서 전기방전이 일어난다. 전자온도가 방전조건에 의하여 정해지며 이온도를 통하여 제논의 함량에 따른 방전전압을 이론적으로 계산할 수 있다. 방전 셀 내의 플라즈마가 147 nm와 173 nm의 극자외선을 방출하고 이 자외선들은 형광물질을 여기하여 가시광선을 방출한다. 이러한 모든 과정에 대한 물리적인 메커니즘의 모델을 만들고 실험에서 측정된 데이터와 모델이 예시하는 결과를 비교한다. 실험 데이터는 이론 결과와 비교적 잘 일치하는 것을 관찰할 수 있다. PDP의 방전과 동작을 더욱 개선하기 위하여 새로운 물질이 필요하고 더 좋은 셀 구조가 요구된다.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.71-74
• /
• 2022

For the process simplification in the fabrication of organic light emitting diode(OLED), top emission OLED (TEOLED) was fabricated without lithium fluoride(LiF) used as an electron injection layer (EIL). After co-deposition of Mg and Ag with a different process conditions, a cathode material adjacent to EIL was optimized when Mg and Ag have a ratio of 1:9 considering sheet resistance and transmittance. From the energy band diagram of TEOLED, band gap difference between Trisaluminium (Alq3) and Mg:Ag cathode show the difference of 0.4 eV according to the usage of LiF The fabricated TEOLED without LiF showed the improvement of 5.2 % and 2.7 % in the luminance and the current density comparing that with LiF. The results show there is no significant difference in OLED characteristics regardless of LIF layer in the TEOLED structures.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1123-1125
• /
• 2006

As Kyoto protocol has been effective in 2005, the reduction of $CO_2$ emission is a global urgent problem. In Korea, the $CO_2$ emission of transportation increases continuously, which can be solved partially by the use of railroad. Therefore, it is necessary to calculate exactly the $CO_2$ emission of railroad through life cycle approach. In this study, the $CO_2$ emission of electric motor unit (EMU) was evaluated with its carboy material using life cycle inventory analysis (LCIA). Among the life cycles of EMU, $CO_2$ emission was the highest in the running phase. As the total weight of EMU was lowered, $CO_2$ emission was reduced. In conclusion, the light-weighting of EMU can reduce $CO_2$ emission efficiently.

• Current Optics and Photonics
• /
• 제7권2호
• /
• pp.147-156
• /
• 2023

Circularly polarized (CP) emission can be achieved by integrating emissive materials into chiral metasurfaces. Such CP light sources in integrated device platforms are desirable for important potential applications. However, the exact characterization of the polarization state in CP emission may include some errors because of the unwanted polarization distortion caused by optical components (e.g., beam splitter) in the optical setup. Here, we consider CP emission measurements from chiral metasurfaces and characterize the polarization distortion caused by the beam splitter. We first detail the procedures for the Stokes parameters and Mueller matrix measurements. Then, we directly measure the Mueller matrix of the beam splitter and retrieve the original polarization state of CP emission from our metasurface sample. Using the measured Mueller matrix of the beam splitter, we specifically identify what contributes to polarization distortion in CP emission. Our work may provide useful guidelines for the characterization and compensation of polarization distortion in general Stokes parameter measurements.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.96-97
• /
• 2000

Incoherent broadband optical sources have been applied in various areas such as a light source for optical device characterization, fiber-optic gyroscopes$^{(1)}$ , and spectrum sliced light source in wavelength division multiplexing (WDM) system$^{(2)}$ . To utilize the inherent low loss in silica optical fibers, various types of incoherent light sources are being developed. Among the light sources, the amplified spontaneous emission (ASE) from a rare earth doped fiber has benefits in temperature stability, high output power, low polarization dependence over semiconductor diodes$^{(3)}$ . Recently erbium doped fibers (EDF) have been intensively researched for ASE sources as well as optical amplifiers$^{(4)}$ . The spectrum of ASE from an EDF, however, is limited in the 1520~1560 nm range in conventional configurations. In this letter we described a new broadband ASE source which included both the conventional ASE band of Er$^{3+}$ ion, 1520nm~1560nm and ASE band from Tm$^{3+}$ ions that extends the bandwidth further. For the first time, to the best knowledge of authors, a fiber ASE source based on the energy transfer between Er$^{3+}$ and Tm$^{3+}$ ions in the range of 1460~1550 nm, has been demonstrated using a single 980nm pump laser diode. (omitted)omitted)

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.432-432
• /
• 2007

We studied optical simulation method for ultra slim backlight system. We designed 0.7mm thickness light guide plate and combined 48 white color LEDs for 12 inch wide size TFT-LCD. We designed flat shape PMMA light guide plate with both side patterned. It have vertical prism shape on upper side and ellipse dot pattern on the other side. We targeted 4500 nit brightness and uniform emission characteristic without hot spot or dark area. At first, we designed uniform emission area with more high brightness in center area and then, debugged light entering hot spot zone and direction of outgoing light flux. Although it was designing step, we obtained good result with reverse prism optical sheet and it had good repeatability because it was based on the stamper method in injection process without laser engraving or micro groove engraving method.