• The Korean Journal of Ecology
• /
• 제20권4호
• /
• pp.285-291
• /
• 1997

The taxonomic characteristics of Eupatorium rugosum were reviewed and growth responses under different light intensities were investigated. Changes of soil and vegetation environments at experimental plots on Mt. Namsan were surveyed and the distribution pattern examined. The distribution of E. rugosum was closely related to the content of total nitrogen and available phosphorus in the soil. No competitors which could inhibit the growth of E. rugosum were present. Growth of E. rugosum was highest at a light intensity of 7, 500 lux, but dry weight was highest at a light intensity of 15, 000 lux followed by 30, 000 and 7, 500 lux. Growth in height of E. rugosum under a light intensity of 1, 500 lux continued even though the amount of growth was small. E. rugosum is found throughout the area of Mt. Namsan, and its density is higher at the roadside and in valley regions. E. rugosum appeared at 25 of 50 quadrats on Mt. Namsan, and the mean coverage of E. rugosum in survey quadrats was 12%.

• 오토저널
• /
• 제15권3호
• /
• pp.89-95
• /
• 1993

This paper presents the development of CAD system for the design of lens of the Turn Signal Lamp that can model and simulate its optical performance. The system consists of three main modules: skin surface modeling module, inner lens modeling module and optical performance simulation module. Skin surface geometry can be modeled by the input of data file and inner lens can be modeled by the input of only four parameter using its geometric characteristics. Also light distribution pattern, the barometer of optical performance is generated by means of finite ray tracing method. The system display modeled geometry, ray tracing and generated light distribution pattern.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.263-266
• /
• 2002

An optical method for surface roughness estimation based on statistical analysis of the light intensity of a scattered laser beam pattern. The method is very simple but has a disadvantage that no more information than the averaged roughness is estimated. In this study a new try was conducted to derive more advanced surface information from the details of the light intensity distribution. Some periodic ripples among the light intensity distribution being assumed to relate with scratch left on the machined surface, a corresponding surface profile is estimated from the ripples using FFT and IFFT algorithm. IFFT technique is used to extract some dominant signal components among the intensity distribution. Compared to the measured profiles by a stylus type surf-tester, the profiles obtained through the proposed method are probably acceptable in a sense of the profile shape. Calibration of the amplitude needs more works in the future.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.66-73
• /
• 2017

This study attempted to design lights with Type II distribution suitable for LED street lights based on the regulations of street light distribution developed by the Illuminating Engineering Society of North America (IESNA). The shape of an asymmetric lens, different from that of a rotationally symmetric lens, cannot be generated using a simple mathematical formula. In the first trial, the outline of the lens was fixed and simulated to confirm the distribution type. Following ISENA regulations, some problems that occurred during simulations and repeating was be modified that process is how we detected errors. Through optical research and simulations, a lens conforming to the regulations of Type II very short, Type II short, and Type II medium distributions was developed. A prototype was developed using simulation data and it was subjected to distribution tests. The results show that it can compare with property of Type II distribution.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.25-29
• /
• 2019

Microstructure pattern generation on light guides in backlight unit (BLU) is an essential process for designing flat panel display, but efficient designing algorithm is still limited to achieve uniform luminescence while maintaining fully random distribution to avoid interference effects. In this study, a molecular dynamics model based pattern generation algorithm has been developed. The proposed algorithm allows a fast and efficient distribution of patterns at specified density within the user-defined computational cells, and its efficiency and performance has been demonstrated with sample cases.

• 대한기계학회논문집A
• /
• 제28권4호
• /
• pp.362-369
• /
• 2004

LGP(Light-Guide Panel) of LCD backlight is one of the major componets which affect on the product quality of LCD. The optical relation between brightness and pattern has been investigated for LGP with the uniform distribution of brightness. When given the brightness distribution as target, the solutions of pattern distribution is not unique. Each solution of pattern designs shows the different brightness intensity even though they have the same brightness distribution with target's one. The manufacturing condition of pattern has an influence on the possibly-maximum-brightness intensity among the solutions of pattern design. The present study has examined the effects of LGP thickness, pattern shape errors, and reflection film on the optical characteristics of LGP.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.145-152
• /
• 1999

This paper presents the principle and experimental results of a non-contact surface roughness measurement by means of screen projected pattern of lase beam reflected from a polished surface. In the reflected laser beam pattern especially from a fine surface like ground or polished one, light intensity varies from the center fo the image to its boundary as the Gaussian distribution. The standard deviation of a light intensity distribution is assumed to be a good non-contact estimator for measuring the surface roughnes, because the light reflectivity is known to be well related with the surface roughness. This method doesn't need to discriminate between the specularly reflected light and the diffusely reflected one, whereas the scattered laser intensity method must do. Nor it needs to adjust the change of light intensity caused by environmental lights or specimen materials. Reflected laser beam pattern narrowly spreads out in the vertical direction to tiny scratches on the polished surface due to abrasives. The deeper the scratch the more the dispersion, which means the rougher surface. The standard deviation of the pattern is nearly in proportion to the surface roughness. Measurement errors by this method are shown to be below 10 percent compared with those obtained by a common contact method. The inclination of measuring unit from the normal axis causes the measurement errors up to 10 percent for an angle of 4 degree. Therefore the proposed method can be used as an on-the-machine quick roughness estimator within 10 percent measurement error.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• 한국멀티미디어학회논문지
• /
• 제24권11호
• /
• pp.1461-1471
• /
• 2021

This paper presents a light exposure correction algorithm for less pleasant images, acquired with a light metering failure. Since conventional tone mapping and gamma correction methods adopt a function mapping with the same range of input and output, the results are pleasurable for almost symmetric distributions to their intensity average. However, their corrections gave insufficient outputs for asymmetric cases at either bright or dark regions. Also, histogram modification approaches show good results on varied pattern images, but these generate unintentional noises at flat regions because of the compulsive shift of the intensity distribution. Therefore, in order to sufficient corrections for both bright and dark areas, the proposed algorithm calculates the gamma coefficients using primary parameters extracted from the global distribution. And the fusion weights are adaptively determined with complementary parameters, considering the classification information of a binary segmentation. As the result, the proposed algorithm can obtain a good output about both the symmetric and the asymmetric distribution images even with severe exposure values.

• 소성∙가공
• /
• 제16권1호
• /
• pp.48-53
• /
• 2007

LCD-BLU(Liquid Crystal Display - Back Light Unit) consists of several optical sheets: LGP(Light Guiding Plate), light source and mold frame. The LGP of LCD-BLU is usually manufactured by etching process and forming numerous dots with $50{\mu}m$ in diameter on the surface. But the surface roughness of LGP with etched dots is very high, so there is much loss of light. In order to overcome the limit of current etched dot patterned LGP, optical pattern design with microlens of $50{\mu}m$ diameter was applied in the present study. The microlens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP and optical simulation was carried out to know tendency of microlens patterned LGP simultaneously. The attention was paid to the effects of different aspect ratio(i.e. $0.2\sim0.5$) of optical pattern conditions to the brightness distribution of BLU with microlens patterned LGP. Finally, high aspect ratio microlens patterned LGP showed superior results to the one made by low aspect ratio in average luminance.