• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2008

The ubiquitous sensor network technique is widely applied to variety of information fields such as home automations, logistics, traffic controls, public administrations, health and environment monitoring and etc. It is particularly useful in the areas where energy consumption is minimal and where continuous monitoring of the surrounding environments, which generates streams of data, are required. In this study, we have designed and implemented a living environment automatic control system which collects the streams of temperature, humidity, light and noise data of a simulated house setting in real-time fashion, then controls the home environment based on the collected data according to the users favorites. In order to differentiate the proposed system from the currently existing similar system, we have demonstrated not only the feasibility of collecting data using sensor network in the controlled environment but also the ability to control the various household equipments through wireless communications.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.5
• /
• pp.433-442
• /
• 2012

The influence of outdoor sky conditions on photosensor signals were examined to determine an appropriate index that is effectively used for optimum illuminance fluctuation when a daylight dimming system is used for a small office. Field measurements were conducted under various sky conditions. Results indicate that the outdoor global and vertical illuminance fluctuated within narrow ranges under clear and overcast sky conditions. The fluctuation of sky ratio under partly-cloudy sky caused wide ranges of illumnance fluctuation. A partially-shielded photosensor at backwall produced 56% of light output from fixtures controlled by a photosensor at ceiling. This implies that the photosensor at backwall does not always guarantee target illuminance due to the less output. The fluctuation of light output from fixtures were insignificant under clear and overcast sky. The fluctuation range of photosensor illuminance under partly-cloudy sky caused wide fluctuation ranges of light output. Regression result implies that the outdoor vertical illuminance was recommended for an effective index that is used for control of light output.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2757-2762
• /
• 2012

Sewage pipelines are one of important infra-structures. The main reasons of sewage pipelint failure are improper backfill materials and compaction controls in field. Especially, it is very difficult to compact the lower part of circula pipelines. In order to overcome these problems, the prefabricated light-weight plastic foundation was developed. Couple of load-displacement tests were carried out to get the characteristic of failure. From the limited laboratory loading tests, the use of prefabricated light-weight plastic foundation is an alternative to solve the difficulty of backfill materials and compaction control.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.659-665
• /
• 2008

We demonstrate experimentally that the method of Two-pupil optical scanning technique with PAL-spatial light modulator is capable of performing real-time joint transform correlation(JTC) optical system. Optical addressing is achieved by the use of a photosensitive layer of $\alpha$ - Si which controls the electric field across the liquid crystal The demonstrated technique is based on two-pupil optical heterodyne scanning. The method is independent of a spatial light modulator (SLM) in the Fourier plane. We develop the theory of the technique and evaluate a performance of the method by experimentally estimating the correlation between the target image and the reference image.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.3
• /
• pp.66-74
• /
• 2014

In this paper, the performance of Hybrid Dimming control system for Daylighting system is evaluated by accredited tests. The system controls the balance of illuminance of daylight between daylight system and LED light system. It makes the normal illuminance of interior without the effects of weather by controlling the LED depending on the brightness of outside. For the tests, 6 diffusers($600{\times}300mm$) were installed in lighting area($36m^2$) and normal operation of the system sensors were tested about the interference of sunlight. The results of the examinations were satisfied with the criteria of accredited tests. Further research is the verification of energy saving effect by comparing the Hybrid Dimming control system to current artificial light system.

• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.8-14
• /
• 2023

In this study, basic research was conducted on manufacturing technology of thick-walled light guide a component that controls the light source of automobile lamps. As a preliminary study for manufacturing the final injection molded parts, a model for analyzing the influence of micro patterns on light guides is presented. The optical characteristics of the light guide were analyzed according to the change of the curvature radius of the micro-optical pattern, and the injection molding characteristics of the light guide according to the change of injection molding conditions were analytically evaluated. It was confirmed that the luminance uniformity improves as the R value decreases for changes in the micro-pattern R value, but it was confirmed that there are technical limitations in actual injection mold core processing and high-replication injection molding. Injection molding analysis showed that cooling channel design is very important compared to general injection molding due to thick-wall characteristics and thickness variation. It was also confirmed that the cooling channel has a great influence on the cycle time and birefringence result due to residual stress. As a result of analyzing the influence of filling time, holding condition, and cooling on shrinkage, it was found that the cooling water temperature has a significant effect on the shrinkage of ultra-fine light guide parts, and the holding condition also has a significant effect.

• Safety and Health at Work
• /
• v.10 no.3
• /
• pp.355-361
• /
• 2019

Background: Painters in the automotive sector are routinely exposed to volatile organic solvents, and the levels vary depending on the occupational health and safety controls enforced at the companies. This study investigates the levels of exposure to organic vapors and the existence of controls in the formal economy sector in southern Colombia. Methods: This is an exploratory study of an observational and descriptive character. An analysis of solvents is conducted via the personal sampling of painters and the analysis of samples using the National Institute for Occupational Safety and Health 1501 method. The amount of solvents analyzed varied according to the budget allocated by the companies. The person in charge of the occupational safety and health management system was interviewed to learn about the exposure controls implemented at the companies. Results: A medium exposure risk for toluene was found in one company. Another presented medium risk for carbon tetrachloride, xylene, ethylbenzene, and n-butanol. The others showed low risk of exposure and that the controls implemented were not sufficient or efficient. Conclusion: These results shed light on the working conditions of these tradespeople. The permissible limits established by Colombian regulations for the evaluated chemical contaminants were not exceeded. However, there were contaminants that exceeded the limits of action. The analysis of findings made it possible to propose improvements in occupational safety and health management systems to allow the optimization of working conditions for painters, prevent the occurrence of occupational diseases, and reduce costs to the country's health system.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.593-597
• /
• 2009

In this paper, we present a spatial perturbation method to control the optical patterns in semiconductor microresonators in the far-field configuration. We propose a fast all-optical switch which operates at a low light level. The switching beam controls the behavior of output beams with strong intensities. The method has been applied successfully to different optical patterns such as rolls, squares, and hexagons.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.694_695
• /
• 2009

본 논문은 매입형 영구자석 동기 전동기(IPMSM)의 고속출력 구동을 위한 제어 특성 해석을 시뮬레이션을 통해 나타낸다. IPMSM의 d축,q축 인덕턴스인 Ld, Lq 선형모델과 비선형 모델의 선형 제어와 비선형제어를 실험과 시뮬레이션에 의하여 비교 분석 하였다. 본 논문은 IPMSM에 최적화된 제어 시스템 구연에 있어서 기초 자료가 될 것이다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.35-40
• /
• 1991

In this paper, a new adaptive learning algorithm, Training by Adaptive Gain (TAG) for optical implementation of large-sized neural networks has been developed and its electro-optical implementation for 2-dimensional input and output neurons has been demostrated. The 4-dimensional global fixed interconnections and 2-dimensional adaptive gain-controls are implemented by multi-facet computer generated holograms and LCTV spatial light modulators, respectively. When the input signals pass through optical system to the output classifying layer, the TAG adaptive learning algorithm is implemented by a personal computer. The system classifies three 5$\times$5 input patterns correctly.