• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.107-120
• /
• 2001

Nitric oxide(NO) has been reported to be one of the mediators relating to bone remodelling. Nitric oxide is synthesized from L-arguinine by nitric oxide synthetase(NOS), which is largely divided Into two groups. One group which is composed of $NOS_1\;and\;NOS_3$, is dependent of calcium or calmodulin. The other consisted of $NOS_2$, which is independent of calcium or calmodulin. NOS is thought to be a possible intermediate affecting in the course of tooth movement. This study was designed to evaluate the expression of nitrous oxide synthetase(NOS) in periodontal tissue during the experimental movement of rat incisors, by LSAB(labelled streptavidine biotin) immunohistochemical staining for $NOS_2\;and\;NOS_3$. Twenty seven Sprague-Dawley rats were divided into a control group(3 rats), and 6 experimental groups(24 rats), to which 75g of force was applied, with helical springs across the maxillary incisors. Rats of experimental groups were sacrificed at 12 hours, 1, 4, 7, 14 and 28 days after force application, respectively. After that, the tissues of the control group and experimental groups were studied immunohistochemically. The results were as follows: 1. In control group, the expression of $NOS_3$ was rare in gingiva, dentin, periodontal ligament and alveolar bone, and was mild in the capillaries of pulp and intermaxillary suture. And the expression of $NOS_2$ showed similar pattern to that of $NOS_3$. 2. There were no differences in the expression of $NOS_2\;or\;NOS_3$ in dentin, gingiva, cementum, cementoblast and odontoblast, between control and experimental groups, regardless of the duration of the force application. 3. The expression of $NOS_3$ began to increase at 4 days and showed to the highest degree at 7 days after force application, in the apical region of pressure side of periodontal ligament in experimental groups. 4. The expression of $NOS_3$ in alveolar bone was rare until 7 days, after which it increased to mild degree at 14 days through 28 days in experimental group. But there was no difference between pressure and tension side of periodontal ligament. 5. The expression of $NOS_2$ in periodontal ligament was mild from 7 days after force application, regardless of the side of periodontium, which was generally more evident than that of $NOS_3$. 6. The expression of $NOS_2$ in alveolar bone increased to mild degree at 14 days after force application, and it was evident in osteoblasts, osteoclasts and osteocytes. And the expression of $NOS_2$ was little more stronger in the tension side than that of pressure side of alveolar bone.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.419-429
• /
• 1998

This study was carried out in order to study early histologic changes and repair reaction appling to extrusive force for 3rd premolar of adult dogs. After 1 week of extrusive force with elastic chain, one of dogs was sacrified and after 3 weeks retention period, another dog was sacrified. The paraffin sections of samples were stained with Hematoxylin - Eosin and Masson's Trichrome and were examed by light microscopy . The obtained results as follows 1. In Hematoxylin - Eosin and Masson Trichrome stain of control group , the periodontal ligament width was constant from apical third to cervical third of the root and periodontal fiber arrangement was horizontal or oblique in cervical third. oblique in middle third, oblique in apical third of root. in alveolar bone, smooth appearance was shown 2. In Group 1, all periodontal fiber arrangement was oblique toward tooth, and the periodontal ligament width increased Partially PDL was ruptured in apex. In MT stain, immature bone formation was seen at alveolar crest area. Active bone formation was observed along the one side of alveolus, and apical portion of pulp was involved with blood vessel rupture , vacuolization of pulp tissue and hyperemia 3. In Group 2, most periodontal ligament arrangement and PDL width was repaired and fiber density increased. In MT stain, mineralization of immature bone on the alveolar crest was progressed. In pulp, vacuole and hyperemia was diminished and fibrotic change was diminished 4. After 3 week periodontal ligament has more repair ability than pulp tissue. pulp was involved with vacuolization and fibrosis, so it takes more time for repair.

• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.25-53
• /
• 1988

Retraction of canines represents a fundamental stage in a considerable number of orthodontic treatment. Correct position of the canine after retraction is most important for function, stability, and esthetics. The purpose of this study was to investigate the stress in the periodontal tissue at the initial phase during canine retraction using various types of sectional retraction springs, by finite element method. Three dimensional model of tooth, periodontal ligament, bone and eight springs were simulated and tested. The following results were obtained. 1. In sectional retraction springs, increasing number of helix and the closed loop in preference to the open loop provided an decrease in horizontal force. Without angulating the arms of spring, the T-loop revealed the highest Moment-to-force ratio. 2. The Moment-to-force ratio raised by angulating mesial and distal arms of spring, but very large horizontal force was applied to canine. 3. When optimal force and optimal moment was applied to canine, the stress induced was homogeneous and the difference of stress value from cervix to the apex was little.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.7 no.1
• /
• pp.33-36
• /
• 2008

Purpose: The purpose of this study was to evaluate the mechanism of injury in the anterior cruciate ligament tears sustained in participation in soccer. Materials and methods: 50 patients whose knees were injured during playing soccer were enrolled in this study. The mean age was 27 years old, 47 were male and 3 female. 15 of them were either professional or amateur soccer players, the rest were non-professional. The injury mechanism was investigated by evaluation of the medical records or by telephone interview. Results: The injury mechanism involved contact injuries in 17 patients and non-contact in 33. 41 patients were bearing weight on the involved side at the time of injury, and 9 patients were not. In cases of contact injury, 9 of the 17 patients had sustained a valgus force to the knee, and 5 patients had varus force, 11 patients had their foot planted, and 6 did not. Among those patients with a planted foot, 3 patients were injured by the rotation of the thigh, 1 patient was injured by hyperextension, and there were no deceleration mechanism injuries. In non-contact injuries, 30 out of 33 patients had their foot planted at time of injury and only 3 patients did not. Of these 30 patients, 16 were injured by the rotation of thigh, 6 sustained a varus force on the knee joint and 5 had a valgus force, 5 were injured by hyperextension, and 2 by deceleration. 3 patients, who did not have their foot planted, were injured while kicking with the involved leg. Conclusions: For soccer players in this series, the most common mechanisms resulting in anterior cruciate ligament tears were non-contact, most often by rotation of the torso over a planted foot. In contact injuries, the most common mechanism was the application of valgus force by tackle.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.417-428
• /
• 2004

The purpose of this study was to evaluate the stress distributions at the periodontal ligament (PDL) and displacements of the maxillary first molar when mesially directed force was applied under various molar angulations and rotations. A three dimensional finite element model of the maxiilary first molar and its periodontal ligament was made Upright position, mesially angulated position by $20^{\circ}$ and distally angulated position of the same degree were simulated to investigate the effect of molar angulation. An anteriorly directed force of 200g countertipping moment of 1,800gm-mm (9:1 moment/force ratio) and counterrotation moment of 1,000gm-mm (5:1 moment/force ratio) were applied in each situation. To evaluate the effect of molar rotation on the stress distribution, mesial-in rotation by $20^{\circ}$ and the same amount of distal-in rotation were simulated. The same force and moments were applied in each situation. The results were as follows: In all situations, there was no significant difference in mesially directed tooth displacement Also, any differences in stress distributions could not be found, in other words. there were no different mesial movements. Stress distributions and tooth displacement of the $20^{\circ}$ mesially angulated situation were very similar with those of the $20^{\circ}$ distal-in rotated situation. The same phenomenon was obserned between the $20^{\circ}$ distally angulated situation and $20^{\circ}$ mesial-in rotated situation. When the tooth was mesially angulated, or distal-in rotated, mesially directed force made the tooth rotate in the coronal plane. with its roots moving buccally, and its crown moving lingually. When the tooth was distally angulated, or mesial-in rotated, mesially directed force made the tooth rotate in the coronal plane, with its roots moving lingually and its crown moving buccally. When force is applied to au angulated or rotated molar, the orthodontist should understand that additional torque control is needed to prevent unwanted tooth rotation in the coronal plane.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.1
• /
• pp.57-70
• /
• 2004

The significance of occlusion has regained its popularity in dentistry with the introduction of implant therapy. Literature has reported that the clinical success and longevity of dental implants can be achieved by biomechanically controlled occlusion. Occlusal overload is known to be one of the main causes for implant failure. Evidences have suggested that occlusal overload contribute to early implant bone loss as well as deosseointegration of successfully integrated implants. Unlike natural teeth, osseointegrated implants are ankylosed to surrounding bone without the periodontal ligament (PDL) which provides mechanoreceptors as well as shock-absorbing function. Moreover, the crestal bone around dental implants may act as a fulcrum point for lever action when a force (bending moment) is applied, indicating that implants/implant prosthesis could be more susceptible to crestal bone loss by applying force. Hence, it is essential for clinicians to understand inherent differences between teeth and implants and how force, either normal or excessive force, may influence on implants under occlusal loading. The purposes of this paper are to review the importance of implant occlusion, to establish the optimum implant occlusion with biomechanical rationale, to provide clinical guidelines of implant occlusion and to discuss how to manage complications related to implant occlusion.

• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.311-323
• /
• 2001

One of the various mechanics used to treat unilateral Class II malocclusion is head gear with asymmetric face bow. We made the finite element models of unilateral Class II maxillary dental arch and power arm asymmetric face bow. We designed this experiment to observe stress distribution of periodontal ligament, reaction force, and displacement and to understand force system, so to predict the therapeutic effect. On the basis of computerized tomograph of maxillary dental arch of 25 years old male with normal occlusion without extraction and orthodontic treatment history, we made finite element models of maxillary dental arch and periodontal ligament. Then we modified that model to unilateral maxillary Class II malocclusion model of which maxillary left molar displaced mesially. Also, We made finite element model of asymmetric face bow of which right outer bow shorter than left by 25mm(RMO, Penta-FormTM/Medium size, 0.045 inch iner bow, 0.072 inch outer bow). After that, retraction force of 250g, 300b, 350g were applied to maxillary first molar. We concluded as follow. 1. The Net force that both maxillary first molars were received increased as the retraction force increased. Mesially positioned tooth received more force than normally positioned tooth. But, both tooth were received distal force, so distal movement occured. 2. Both tooth received buccal lateral force. In analysis of force element, as the retraction force were increased, force of X-axis at mesially positioned tooth decreased, and force of X-axis at normally positioned tooth increased. so lateral force component moved to the side received less force from more force. 3. There were rotation, tipping with distal movement in maxillary first molar. As retraction force were increased, rotation and tipping also increased. More tipping and rotation occured at the side received more force, that is, mesially positioned tooth. Though it Is small change, displacement of same pattern occur in normally positioned tooth

• The Journal of the Korean dental association
• /
• v.51 no.3
• /
• pp.138-147
• /
• 2013

Orthodontic tooth movement is a unique process which tooth, solid material is moving into hard tissue, bone. Orthodontic force in general provides the strain to the PDL and alveolar bone, which in turn generates the interstitial fluid flow(in detail, fluid flow in PDL and canaliculi). As a results of matrix strain, periodontal ligament cells and bone cells are deformed, releasing variety of cytokines, chemokines, and growth factors. These molecules lead to the orthodontic tooth movement(OTM). In these inflammation and tissue remodeling sites, all of the cells could closely communicate with one another, flowing the information for tissue remodeling. To accelerate the rate of OTM in future, local injection of single growth factor(GF) or a combination of multiple GFs in the periodontal tissues might intervene to stimulate the rate of OTM. Corticotomy is effective and safe to accelerate OTM.

• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.21-44
• /
• 1989

Incipient changes of the periodontal tissue in the pressure zones of rat molar subjected to the experimental force were studied by the transmission electron microscope. Experimental animals were consisted in 3 control and 21 experimental rats, of which one maxillary first molar was moved buccally with a fixed appliance which were exerting the force of 15 gm. After experimental period of 1 hour, 3 hours, 6 hours, 24 hours, 2 days, 3 days and 7 days, the animal were sacrificed with cardiac perfusion of $2.5\%$ glutaraldehyde in the sodium cacodylate buffer and the experimental teeth with surrounding periodontal structures were processed for electron microscope. At the beginning of the tooth movement, periodontal ligaments of the pressure were compressed and collagenous fibers were arranged parallel to the root of the teeth and cell free zones in company with cell necrosis were followed. Cell free zones at the periodontal ligaments appeared in the 3 hour survival group, and getting severe with time lapse it became widespread in 2-3 day survival group and undermining bone resorption as a healing process was observed in 7 day survival group. Dilatation of mitochondria and swelling of the rER in the fibroblast and other connective tissue cells in the periodontal ligament were observed in the 3 hour survival group, which were characteristics of the incipient changes in the compressed periodontal ligament. Dilatation of nuclear membrane and pyknosis were followed by the destruction of the nucleus and cell membrane. There were no evidence in cell damage or necrosis of the alveolar bone adjacent to the hyalinized area of periodontal ligaments.

• The korean journal of orthodontics
• /
• v.45 no.1
• /
• pp.20-28
• /
• 2015

Objective: The purpose of this study was to observe stress distribution and displacement patterns of the entire maxillary arch with regard to distalizing force vectors applied from interdental miniscrews. Methods: A standard three-dimensional finite element model was constructed to simulate the maxillary teeth, periodontal ligament, and alveolar process. The displacement of each tooth was calculated on x, y, and z axes, and the von Mises stress distribution was visualized using color-coded scales. Results: A single distalizing force at the archwire level induced lingual inclination of the anterior segment, and slight intrusive distal tipping of the posterior segment. In contrast, force at the high level of the retraction hook resulted in lingual root movement of the anterior segment, and extrusive distal translation of the posterior segment. As the force application point was located posteriorly along the archwire, the likelihood of extrusive lingual inclination of the anterior segment increased, and the vertical component of the force led to intrusion and buccal tipping of the posterior segment. Rotation of the occlusal plane was dependent on the relationship between the line of force and the possible center of resistance of the entire arch. Conclusions: Displacement of the entire arch may be dictated by a direct relationship between the center of resistance of the whole arch and the line of action generated between the miniscrews and force application points at the archwire, which makes the total arch movement highly predictable.