• 한국항공우주학회지
• /
• 제50권7호
• /
• pp.497-505
• /
• 2022

본 연구에서는 회전익기 통합 해석 코드인 CAMRAD II를 이용하여 풍동 시험용 Lift-offset 동축 반전 로터의 성능 및 허브 진동 하중 해석을 수행하였다. 본 논문에서는 전체 로터의 추력을 트림 목표 값으로 사용하는 트림 조건 및 상/하 로터 각각의 추력을 트림 목표 값으로 이용하는 트림조건을 사용하였다. 두 종류의 트림 기법에 대하여 다양한 전진비 및 Lift-offset 값을 고려하여 해석을 수행하였고, 계산된 결과를 선행연구의 풍동 시험 및 해석 결과와 상호 비교하였다. 두 종류의 트림 기법을 이용한 연구 결과에서 모두 다양한 전진비 및 Lift-offset 값에 대하여 상/하 로터 각각의 양력, 토크 및 전체 로터의 로터 유효 양항비가 선행연구의 풍동 시험 결과와 유사함을 확인하였다. 또한 로터의 2P 허브 진동 하중 해석 결과를 기반으로 Lift-offset 동축 반전 로터 허브의 진동 하중 특성을 확인하였다. 본 연구를 통하여 CAMRAD II를 이용한 풍동 시험용 Lift-offset 동축 반전 로터의 모델링 및 해석 기법을 적절히 구축하였으며, 성공적으로 검증하였다.

• 한국군사과학기술학회지
• /
• 제24권3호
• /
• pp.255-263
• /
• 2021

This paper investigates numerically the effect of rotor hub vibratory load components on the airframe vibration responses of high-speed compound unmanned rotorcraft (HCUR) using a lift-offset coaxial rotor, wings, and two propellers. The rotor hub vibratory loads are predicted using a rotorcraft comprehensive analysis code, CAMRAD II, and the airframe vibration responses are calculated by a finite element analysis software, MSC.NASTRAN. It is shown that the vibratory hub pitch moment of a lift-offset coaxial rotor is the most dominant component for both the longitudinal and vertical vibration responses at four specified locations of the airframe.

• 한국군사과학기술학회지
• /
• 제23권4호
• /
• pp.311-318
• /
• 2020

This study investigates the performance and blade airloads for a rigid coaxial rotor of high-speed compound unmanned rotorcrafts. The present compound unmanned rotorcraft uses not only a rigid coaxial rotor, but also wings and propellers for high-speed flights. For the rigid coaxial rotor in this work, CAMRAD II, a rotorcraft comprehensive analysis code, is used to study the performance at a flight speed of up to 250 knots and blade section lift forces at 230 knots. As the flight speed increases, the rotor power decreases; however, the power of propellers increases to overcome the drag force of a rotorcraft in high-speed flight. The effective lift-to-drag ratio of a rotor has the maximum value of about 11.6 which is much higher than the value of the conventional helicopter. The blade section lift forces of the upper and lower rotors at 230 knots show the similar variation trends for one rotor revolution, and the impulses because of the aerodynamic interaction between both rotors are observed.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.154-164
• /
• 2017

This work conducts a validation study for the XH-59A helicopter using a rigid coaxial rotor system in order to establish the techniques of the conceptual design and performance analysis for the lift-offset compound rotorcraft. As a tool for conceptual design and performance analysis, NDARC (NASA Design and Analysis of Rotorcraft) is used for the present study. An assumed mission profile is considered for the conceptual design of the XH-59A. As a validation result of the design, the dimensions and weight of the XH-59A are appropriately designed when compared to the target values since the relative error is less than 0.5%. Then, performance analyses are conducted for the designed XH-59A model with and without auxiliary propulsion in hover and forward flight conditions. The present analyses show good validity since the prediction results compare well with both the flight test and previous analyses. Therefore, the techniques for the conceptual design and performance analysis of the lift-offset compound helicopter are overall considered to be appropriately established. In addition, this study investigates the influence of the lift-offset on the rotor effective lift-to-drag ratio of the XH-59A helicopter with auxiliary propulsion. As a result, the improvement of the rotor effective lift-to-drag ratio can be obtained by appropriately increasing the lift-offset in high-speed flight.

• 한국군사과학기술학회지
• /
• 제24권4호
• /
• pp.357-367
• /
• 2021

This paper studies the simulations of active airframe vibration controls for the Sikorsky X2 helicopter with a lift-offset coaxial rotor. The 4P hub vibratory loads of the X2TD rotor are obtained from the previous work using a rotorcraft comprehensive analysis code, CAMRAD II. The finite element analysis software, MSC.NASTRAN, is used to model the structural dynamics of the X2TD airframe and to analyze the 4P vibration responses of the airframe. A simulation study using Active Vibration Control System(AVCS) with Fx-LMS algorithm to reduce the airframe vibrations is conducted. The present AVCS is modeled using MATLAB Simulink. When AVCS is applied to the X2TD airframe at 250 knots, the 4P longitudinal and vertical vibration responses at the specified airframe positions, such as the pilot seat, co-pilot seat, engine deck, and prop gearbox, are reduced by 30.65 ~ 94.12 %.