• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1658-1660
• /
• 2007

We fabricate green device having unique life time characteristics of operating voltage reduction with time, ${\Delta}V_{op}$ <0. A green device needs lower voltage than initial voltage for sustaining constant current as life time goes on. It means there are two possible reasons; one is interface modification between anode and HIL due to oxygen plasma treatment and the other is bulk property modification due to combination of new green host and new green dopant. From these materials and oxygen plasma treatment, we can make white OLED device having the characteristics of low ${\Delta}V_{op}$ increasing.

• Journal of the Korean Wood Science and Technology
• /
• 제27권4호
• /
• pp.20-29
• /
• 1999

Temperature has important effect on mechanical properties of wood. These effect needs to be understood and taken into account in the structural use of wood. Furthermore, the effect of cooling after exposing to high temperature must be explained. In this study, the effect of temperature, exposure time, specific gravity, and cooling on bending properties were investigated. The boundary temperatures at which bending MOE and MOR reduced rapidly were approximately $200^{\circ}C$ and $150^{\circ}C$, respectively. This boundary temperature was nearly constant with independence of species(specific gravity), exposure time, and cooling. Above the boundary temperature, the effect of exposure time was increased with temperature and the reduction of bending MOE and MOR for Japanese Larch with relatively higher specific gravity was smaller than that of Hem-fir. The recovery of bending MOE and MOR after cooling was also more significant above the boundary temperature than below. The degree of cooling effect was larger for MOR than MOE. Consequently, bending properties of wood in elevated temperatures should be considered in terms of the boundary temperature, $200^{\circ}C$ for bending MOE, $150^{\circ}C$ for MOR, and these boundary temperatures must be considered an important factor. Furthermore, to evaluate the safety of structure, the recovery after cooling should be considered.

• 한국산업융합학회 논문집
• /
• 제21권3호
• /
• pp.141-147
• /
• 2018

In a time when product development cycles are getting shorter and shorter, many companies are making efforts to develop products with high reliability in a short period of time, accelerated life test is widely used as a method to quickly evaluate reliability. Accelerated life test reduces the test life or the life of the product from the observed data by shortening the lifetime of the product or abruptly lowering the performance under the worse condition than the actual condition in order to shorten the test cost or the test time. In this paper, BL3640A-06P+RB35, DC12V model, which is used in the support device of an automatic rotation type digital signage, which display various information such as textures and images on a display screen in a public place or a commercial space, BLDC motors were subjected to a constant stress test and at the rotational speed of 1rpm, $180^{\circ}$ rotation and reverse rotation under actual use conditions, the stress was imposed on the rotating speed of 2rpm and the weight of the actual installed product from 22.2kgf to 10kgf were installed. The lifetime of the actual use environment condition is 23,545 hours and the rotation speed is accelerated. The life time of the acceleration condition with the additional weight is 1,380 hours. The acceleration factor is calculated as 17.06, the one year guarantee test day is 235 days to 14 days, of the period from 470 days to 28 days, and the third year from 704 days to 42 days. The test date of the BLDC motor was tested on the shortened test date, and the rotational speed and the current value were measured. It is found that there is no defect even if it operates as the test date corresponding to the specified one year warranty period and the 3 year accelerated life test which is experimented. Using the statistical technique of the regression analysis the expected time for the motor to defect to #4 samples was 20 years.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.246-255
• /
• 2016

When spring of the suspension is exerted by an external load, a car should be designed to prevent predictable damages and designed for a ride comfort. We used experiments design to design VON-MISES STRESS and K, a constant, of spring of suspension which is installed in a car as a goal level. We analyzed the result from Edison's Elastic - Plastic Analysis SW(CSD_EPLAST) by setting D, d, n as external diameter of coil, internal diameter of coil, the number of total coil respectively. The experiment design let the outcome be as Full-second order by using Box-Behnken which is one of response surface methods. Experimented and analyzed results based on the established experiments design, We found out design parameter which has desired VON-MISES STRESS and the constant K. Additionally, we predicted life time of when the external load was exerted by repeated load by using fatigue equation, and verification of plastic deformation has also been made. Additionally we interpreted a model, which is formed by optimized design parameter, with linear analysis and non-linear analysis, at the same time we also analyzed plastic deformation with the values from the both models. Finally, we predicted fatigue life of optimized model by using fatigue estimation theory and also evaluated a ride comfort with oscillation analysis.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2122-2129
• /
• 2002

Creep damage using a reference stress(RS) was analyzed for type 316LN stainless steel. The generalized K-R equation was reconstructed into the RS equation using a critical stress value $\sigma$. The RS equation was derived from the critical stress in failure time $t_f$ instead of material damage parameter $\omega$, which indicates the critical condition of collapse or approach to gross instability of materials during creep. For obtaining the reference stress, a series of creep tests and tensile tests were conducted with at 55$0^{\circ}C$ and $600^{\circ}C$. The stress-time data obtained from creep tests were applied to the RS equations to characterize the creep damage of type 316LN stainless steel. The value of creep constant r with stress levels was about 18 at 55$0^{\circ}C$ and 21 at $600^{\circ}C$. This value was almost similar with r = 24 in the K-R equation, which was obtained by using damage parameter $\omega$. Relationship plots of creep failure strain and life fraction $(t_f /t_r)$ were also obtained with different λ values. The RS equation was therefore more convenient than the generalized K-R equation, because the measuring process to quantify the damage parameter $\omega$ such as voids or micro cracks in crept materials was omitted. The RS method can be easily used by designers and plant operator as a creep design tool.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권5호
• /
• pp.949-966
• /
• 2013

Recently, Wireless Body Area Network (WBAN) has promise to revolutionize human daily life. The need for multiple sensors and constant monitoring lead these systems to be energy hungry and expensive with short operating lifetimes. In this paper, we offer a review of existing work of WBAN and focus on energy-aware management in it. We emphasize that nodes computation, wireless communication, topology deployment and energy scavenging are main domains for making a long-lived WBAN. We study the popular power management technique Dynamic Voltage and Frequency Scaling (DVFS) and identify the impact of slack time in Dynamic Power Management (DPM), and finally propose an enhanced dynamic power management method to schedule scaled jobs at slack time with the goal of saving energy and keeping system reliability. Theoretical and experimental evaluations exhibit the effectiveness and efficiency of the proposed method.

• 한국발생생물학회지:발생과생식
• /
• 제17권2호
• /
• pp.111-119
• /
• 2013

Golden hamsters reproduce in a limited time of a year. Their sexual activities are active in summer but inactive in winter during which day length does not exceed night time and environmental conditions are severe to them. The reproductive activities are determined by the length of light in a day (photoperiod). Melatonin is synthesized and secreted only at night time from the pineal gland. Duration of elevated melatonin is longer in winter than summer, resulting in gonadal regression. The present study aimed at the influences of continuous melatonin treatments impinging on the gonadal function in male golden hamsters. Animals received empty or melatonin-filled capsules for 10 weeks. They were divided into long photoperiod (LP) and short photoperiod (SP). All the animals maintained in LP (either empty or melatonin-filled capsules) showed large testes, implying that melatonin had no effects on testicular functions. Animals housed in SP displayed completely regressed testes. But animals kept in SP and implanted with melatonin capsules exhibited blockage of full regression by SP. These results suggest that constant release of melatonin prohibits the regressing influence of SP.

• 간호행정학회지
• /
• 제19권1호
• /
• pp.17-27
• /
• 2013

Purpose: This study was done to explore how nurses manage the boundary for work-family balance. Methods: Data were collected through in-depth interviews from February 1 to May 28, 2012. Participants were 13 married nurses with children. The constant comparative method was adapted for data analysis. Results: In this study, nurses' work-family boundary management had characteristics of integration, maintenance and control, but it was adjusted and modified over time as the order of priorities was rearranged according to changes in internal cognition and family support. Nurses strategically persuaded their families to understand their work and share housework in an effort to integrate work and family, while controlling them by managing working hours and time for themselves. Conclusion: The results of the study indicate that nurses' work has an impact on family life due to heavy workload and insufficient time, however the work-family balance can be successfully maintained with the effective separation of the two areas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.212-214
• /
• 1996

The growth of tree is affected by voltage, frequency, temperature, mechanical stress, etc.. This paper describes the effect of applied voltage on the growth of tree in DGEBA/MDA/GN(10 phr) system. As applied voltage increased, the time to breakdown of the system reduced. As applied time increased, the tree length of X-axis increased with sigmoid shape, however, the tree length of Y-axis increased sharply at the initial step and then were nearly constant. The phenomena of tree were complicated more and more, as applied time increased.

• 한국식품저장유통학회지
• /
• 제15권3호
• /
• pp.332-339
• /
• 2008

가공이나 저장 중 쉽게 산화하는 특성을 갖는 ascorbic acid의 안정성을 확보하기 위해 Zein-DP와 HPMC-FCC를 코팅제로 유동층 코팅을 실시하여 ascorbic acid의 저장기간을 예측하고자 하였다. 단분자층 수분함량은 BET식보다 GAB식이 높은 유의성을 나타내었으며, 등온흡습곡선은 ascorbic acid 분말을 제외한 유동층 코팅된 분말의 경우 sigmoid 형태를 나타내었다. 등온흡습곡선의 적합도는 Halsey, Caurie, Oswin Kuhn 모델이 높은 적합도를 보였다. 평형상대습도 예측모델식은 시간과 수분활성도를 변수로 하여 모델식을 수립할 수 있었다 유동층 코팅분말한 ascorbic acid의 DPPH 소거능 변화를 품질지표로 하여 온도와 저장기간에 따른 품질변화 특성을 알아본 결과, DPPH 소거능은 온도가 높을수록 더 큰 영향을 받고 저장기간이 길어질수록 감소하는 경향을 나타내었다. 저장말기에서는 ascorbic acid의 소거능이 유동층 코팅한 분말보다 더 빠르게 감소되는 것으로 보아 유동층 코팅으로 품질 변화를 막을수 있음을 확인하였다. 1차 반응속도식에 따라 반응속도상수를 구하여 10, 20, 30, 50 및 $70^{\circ}C$에서의 반응속도상수를 예측한 결과 온도가 높을수록 높은 반응속도상수를 가져 품질변화가 빠르게 진행되는 것을 알 수 있었다. DPPH 소거능이 50%를 유지하는 저장기간을 예측한 결과 Zein-DP로 코팅한 경우 $20^{\circ}C$에서 45.83일, $10^{\circ}C$에서 63.19일이었고, HPMC-FCC로 코팅한 경우 $20^{\circ}C$에서 28.84일, $10^{\circ}C$에서 36.14일로서, 코팅하지 않은 ascorbic acid보다 저장기간이 연장됨을 확인하였으며 Zein-DP로 코팅한 분말의 경우가 저장기간이 가장 연장될 수 있는 것으로 나타났다.