• 한국물환경학회지
• /
• 제31권1호
• /
• pp.49-54
• /
• 2015

Acute toxicity test with Daphnia magna has a variety of factors such as incubation condition of test species, food quality and proficiency of laboratory workers. Therefore, proper proficiency testing samples were required for evaluating the competence of laboratory workers. This study aims to propose some appropriate proficiency testing samples for laboratory workers of acute toxicity test with Daphnia magna. Proposed four kinds of standard samples (Sample A, B, C, and D) for proficiency testing were selected from reference materials which were recommended from Canada and USA WET(Whole Effluent Toxicity) authorities. Proposed standard samples were tested by trial application of proficiency testing, homogeneity and stability checks using repeatability test. Sample A, C and D were estimated ad the suitable candidates for proficiency test standard samples except for Sample B. In addition, Sample A was proved to be the most suitable sample.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권4호
• /
• pp.270-275
• /
• 2015

Purpose : UHMWPE (Ultra-high-molecular-weight-polyethylene) is one of the most widely used material in knife protection clothes because of high strength, elasticity, and light weight. The purpose of this study is to develop the accelerated life test method and predict the lifetime for the knife protection fabric composed by UHMWPE. Methods : In this study, degradation characteristics of UHMWPE fibers and knife protection fabric for cut resistance were evaluated under the hydrolysis and photo-degradation conditions. It was found out that the degradation rate of retained tensile strength was more significant in the photo-degradation than hydrolysis. Therefore, the failure time was determined as the time that the retained tensile strength in photo-degradation is less than 50%. Considering an acceleration factor for irradiance and exposure time, the lifetime was predicted from the calculated failure time. Results : As a result of the accelerated life test, the $B_{10}$ lifetime of knife protection fabric composed by UHMWPE fibers is estimated as 2.8 years for a 90% statistical confidence level. Conclusion: Since the lifetime is predicted by the view-point of radiant exposure in this study, there is a possibility that the estimated lifetime may differ from the actual lifetime. However, it is considered as an useful methodology to estimate the long-term lifetime of knife protection fabrics.

• 응용통계연구
• /
• 제9권2호
• /
• pp.119-134
• /
• 1996

가속수명검사는 시간과 경비를 현실적인 여건에 맞추기 위하여 정상조건보다 열악한(강도가 높은) 조건에서 검사를 수행하여 그 결과를 정상조건에서의 수명분포와 관련된 관심사(기대수명, 신뢰도) 등을 추정하는 것을 목적으로 하는 검사 방법이다. 이 연구에서는 고장률이 다른 두 개의 부품이 직렬형으로 구성된 시스템의 가속수명검사 자료를 분석할 때 사용되는 하나의 모형을 제안하고 분석 과정 및 기존의 두 개의 부품이 서로 독립이라고 가정한 모형과 비교하는 것을 주요 내용으로 하였다. 시스템이 작동될 때 받는 관찰이 가능하지 않은 총체적인 환경의 효과를 동일 시스템내의 두 개의 부품이 공유하게 됨으로써 발생되는 두 부품의 수명의 의존성을 frailty 모형을 이용하여 모형화하였고, 분석 과정에서는 Profile 우도함수를 사용하여 최대 우도 추정 과정에서의 초기치 문제를 해결하는 방법을 제시하고 모의실험을 통하여 독립성의 가정을 검토하여 보았다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권3호
• /
• pp.154-162
• /
• 2015

We have performed accelerated photo-degradation test using a 10-Sun level high irradiance $Weather-Ometer^{(R)}$ (10-Sun Ci5000) in an attempt to study acceleration and correlation between accelerated and service conditions for ink-jet ink. The accelerated test was used to predict lifetimes of ink-jet ink through the calculation of scaling factor for intensity of irradiance and duration of usage combined with estimation of lifetime distribution and inverse power model as a life-stress model. The lifetimes and acceleration factors for foreign and domestic inks were compared with each other. The results showed that the failure mechanisms and life-stress models for ink-jet ink were different among the color of ink which means that we might be in need of further study by color of inks.

• 대한산업공학회지
• /
• 제28권4호
• /
• pp.407-414
• /
• 2002

The inherent reliability of a product is primarily determined in the design stage, and therefore, design engineers should be able to design reliability into the product in an efficient manner. Especially, the product should be designed such that its reliability is robust to various noise factors encountered in production and field environments. The Taguchi method can be effectively used for this purpose. However, there exist only a few attempts to integrate the Taguchi method with reliability design, and in addition, the existing works do not sufficiently consider the robustness and/or the distinction between noise and acceleration factors. This paper develops a unified approach to robust reliability design assuming that accelerated life tests are conducted at each combination of design and noise conditions. First, an experimental structure for assigning not only acceleration but also noise factors is presented. Second, the reliability at the use condition is estimated using the assumed accelerated life test model. Third, reliabilities are transformed into 'efforts' using an effort function which reflects the degree of difficulty involved in improving the reliability. Finally, an optimal setting of design parameters is determined based on the mean and standard deviation of the effort values. The above approach is illustrated with an example of a paper feeder design.

• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.1-8
• /
• 1994

To enhance the strength of gears for transmission, Generally caburizing heat treatment is applied. But there are some problems in this technology the distortion of gears during heat treatment process, and the discontinuity of manufacturing process. For these reasons, the high frequency induction hardening process is widely used. This method is one of the surface hardening process to improve the wear resistance and fatigue life of the machine components. In this study, to compare the bending fatigue strength of caburized gear with that of induction hardened gear, bending fatigue testing of gears with two different cases was performed by using an electrohydraulic servo-controlled fatigue testing machine and double tooth bending fatigue test fixture. Fatigue life distributions at constant stress levels were established directly from fatigue data. For gear design, the fatigue strength distribution at specified life is more important. This distribution is obtained by statical transformation from fatigue life distribution. Reliability of bending fatigue strength was estimated by P-S-N curves and Weibull distribution.

• 한국가스학회지
• /
• 제12권2호
• /
• pp.53-56
• /
• 2008

용접 부위의 결함을 비파괴적으로 탐지하기 위하여 홀센서에 의해 누설자속을 측정할 수 있는 시스템과 4 종류의 용접결함을 갖는 기준시편을 제작하였다. 제작한 시스템으로 시편에 생성시킨 4 종류의 결함에서 누설된 자속을 측정하였고, 신호의 피크-피크 크기와 피크-피크 간의 간격에서 결함의 종류를 구분할 수 있는 가능성을 확인하였다.

• 한국군사과학기술학회지
• /
• 제22권2호
• /
• pp.241-248
• /
• 2019

In this paper, we aim to check the reliability growth of multiple launch rocket components by the life evaluation. We apply the Crow-AMSAA model to the sets of test data obtained from the development phase. The result of the data analysis shows that the reliability of some components needs to be improved. In order to improve their reliability, we analyze the failure mechanism and change their designs. The verification of the reliability growth for those components is done by analyzing the data sets obtained by the accelerated life tests. As a result, we show that the MTBF of those components is increased and also their reliabilities improved.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3059-3064
• /
• 2011

A Trolley line is a very important equipment among electric railway equipments since it contacts directly with pantograph and supplies electricity on the electromotive. Such it was thought that a trolley line need not to consider fatigue since the replace cycle by wear is shorter than the replace cycle by fatigue breakage. But, the bending fatigue breakage accidents occurred several times at the Shinkansen trolley line in East Japan Railway Company. Therefore, in case of a new developed trolley line, the evaluation for bending fatigue life became more important, But, since there are not an authorized fatigue test method and a testing device for the trolley line, the quantitative evaluation is difficult. In this study, we analyzed the load and environment condition of trolley line used in the actual spot and the developed testing device that can evaluate bending fatigue properties of the trolley line as simulating the real condition. The bending fatigue test of the trolley line was achieved using the developed testing device and estimated the fatigue life of trolley line and also, established the fatigue test process.

• 한국안전학회지
• /
• 제33권6호
• /
• pp.58-65
• /
• 2018

The life span of the porcelain insulator was made to be 30 years, but currently many of the 154kV NGK porcelain insulators using in Korea are found to have passed the production life. Accidents caused by aged mechanical breakdown can lead to disruption of power supply in some areas, large economic losses, and casualties. Therefore, ultrasonic method, which is one of the non - destructive test methods, is applied as a method for evaluating the integrity of porcelain insulators. In this study, the experiment on the interface of cap was conducted and the difference between the energy difference and the attenuation coefficient of the reflected wave was derived according to the interface state of the steel - cement. The results of this study are expected to be used as the basic data of the ultrasonic testing to evaluate the interface condition of the porcelain insulator cap.