• Journal of Korean Home Economics Education Association
• /
• v.29 no.4
• /
• pp.117-131
• /
• 2017

This study was performed to analyze education contents related to milk in current home economics textbooks of middle school, and to investigate intake status, consumption behaviors, perception and nutritional knowledge of milk and dairy products among 364 middle school students in Gongju for improvement of milk education in home economics subjects and milk intake of adolescents. As a result, education contents of milk and dairy products in home economics textbooks currently applied in middle school were major nutrients, consumption method for balanced diet, and selection and storage of milk and dairy products, thus it tended not to match current food trend. Only 30.5% of subjects met 2 cups of milk a day, the recommended level. The main reason for drinking milk was to 'be taller' and 'to quench thirst' and there was a difference by gender(p<0.01). The rate of not participating in school milk program was 23.1% of total and its satisfaction was moderate. The most popular dairy products by subjects were ice cream, followed by yogurt and cheese, and the choice of milk was focused on 'taste' or 'expiration date'. The rate of knowing certification mark of K-MILK was low at 28.8%, and most subjects knew as 'domestic milk use'. In home economics class, experience-based learning such as cow ranch experience was the most preferred instruction method for milk followed by laboratory practice and lecture, and there was a difference by gender(p<0.001). Perception degree of milk and dairy products was moderate and male subjects were more positively perceived than female subjects(p<0.01). Nutritional knowledge level of milk and dairy products was moderate and female subjects were higher than male subjects(p<0.01). Therefore, education contents of milk and dairy products of home economics textbooks of middle school should be centered on real life in accordance with food trend, and applied student participation-based instruction methods such as experience-based learning. In addition, it is necessary to enhance taste and merchandise of milk and to provide them with preferred milk and dairy products in school milk program for improvement of milk intake of adolescents.

• Korean Journal of Social Welfare
• /
• v.54
• /
• pp.5-33
• /
• 2003

This study is about the re-validation evaluation of the family Relationship Scale (FRS), developed to measure the family relationship in the social work practice. This study aims at re-validating the FRS, developed and validated in by Yang in 2001 for more general utilization. The sample was married mates and females residing in Seoul. For Face Validity, the content analysis was performed, and the FRS was re-validated in the dimensions of Love & Caring, Acceptance, and Recognition, positive affection, empathy, and autonomy and flexibility for each area. Internal reliability was .93, and internal consistency among three dimensions was 93%. For Empirical Validity, the Construct validity, the Criterion validity, and the Discriminant validity were performed. Construct Validity was validated through factor analyses. Commonalities for the factor analysis was 54%, and the factor loading for each factor was over .45. The confirmative factor analysis also confirmed the fitness of the scale. For Predictive Validity of Criterion Validity, regression analysis showed that the family stress scores became lower as the scores of the family relationship became higher; the discriminant analysis revealed that the family stress turned low ill tile group of high scores of family relationship. The Correlation analysis for Concurrent Validity was performed and the results showed the positive and significant relationship with a couple communication level (r=54) and a parent-child communication level (r=64). Life satisfaction and mental health level also revealed significantly positive correlation to prove Convergent Validity. Physical health level revealed a weak relationship with family relationship providing the evidence of Discriminant Validity. Discriminance was also proved by the analysis of variance with demographics. Thus, Cross Validation was confirmed the validation of the FRS through the various analyses with the married population. This study result improved the validity generalization of the Scale and verify the generalized usage of this sociometric scale in the field of social work practice.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.6
• /
• pp.612-618
• /
• 2002

Background : Bronchoscopy is an important diagnostic and a therapeutic tool in chest medicine. However, most patients feel that a bronchoscopy is an unpleasant procedure, and it is important to sedate the patients appropriately, particularly where repetitive examinations are required. Midazolam is a sedative drug with amnestic qualities and a rapid 2 hour half-life. This study have attempted to determine the safety, appropriate dosage, and the effect of midazolam premedication in patients who underwent a bronchoscopy. Methods : One hundred and eighty consecutive patients undergoing bronchoscopy were enrolled in this study. The patients received a midzolam doses of 0.03 mg/kg, 0.06 mg/kg, or a placebo. An additional dose of lidocaine, the total number of coughs, and the duration of the procedures were recorded with monitoring the the blood pressure, heart rate, and oxygen saturation. The level of satisfaction was assessed by the patient, bronchoscopist, and the nurse. Results : The blood pressure, pulse rates, oxygen saturation, number of coughs, lidocaine dose, and procedure time in the 3 groups were similar. There was a trend for the midazolam 0.03 mg/kg group to satisfy bronchoscopists more than the other two groups. The nurses' acceptability was lower in the midazolam 0.06 mg/kg group than the other groups. The patients' acceptablity was greater in both the midazolam 0.03 mg/kg and 0.06 mg/kg groups than in the control group. Conclusion : Sedation with low doses of intravenous midazolam is a safe technique for fiberoptic bronchoscopy with a low morbidity and high acceptable to patients and bronchoscopists.

• Journal of Technologic Dentistry
• /
• v.24 no.1
• /
• pp.51-63
• /
• 2002

The purpose of this study was to be of use for getting rid of job stress from dental technicians, by examining how much they were stressed out at work place as one of the professional medical personnels. The subjects in this study were 255 selected dental technicians who were working in the region of Taegu. The one-on-one interview was conducted from March 1 to 30, 2001, with structured questionnaire. The questionnaire sued in this study included 19 question items about the general characteristics and 29 items regarding job stress. The job stress was categorized into seven subareas based on earlier studies and considering the job situations of dental technicians: heavy workload, job conflicts, improper treatment, role and job knowledge, human relations, physical environment and personal matters. The job stress extent was measured on five-point Likert scale that is widely used in social science: one point for no stress, two for little stress, three for so-so, four for a little stress, and five for severe stress. Therefore, a higher point means a severer job stress. The reliability of the questionnaire turned out very good with Cronbach a = 0.9272. The findings of this study were as follows: 1. The general characteristics of the dental technicians investigated could be described as below: (1) By gender, 80.4% of the dental technicians were male, and 50.2%, the largest percentage, were in their 20s, followed by those in their 30s, those in their 40s, and those in their 50s in the order named. (2) The most common work place was dental technician shop(92.5%), followed by dental technology room in dental hospital or clinic and in general hospital in the order named. The primary duties were coating materials work(30.6%), followed by sculpture, grinding, partial and full denture and orthodontics in the order named. 2. The most larges (1) The most largest motivation to be a dental technician was its being a professional(33.7%), followed by the advice from others, their own aptitude, and good economic treatment in the order named. 3. Their job stress could be explained as below: (1) Their collective job stress average was 3.96$^{\circ}{\ae}$0.50 on the basis of 5 point, which showed that they were exposed to a fairly severe job stress. (2) By area, they were most stressed out from heavy workload (4.12), and they also were severely stressed from role and job knowledge(4.02) and personal matters(4.00). (3) By situation, they were most stressed when the disagreement of prosthesis that results from a specific error is unconditionally attributed to them(4.43). And they were also stressed a lot when their workload increases due to the rework(4.38), when a dentist asks something difficult for them to resolve(4.20), when heavy workload makes their working hours irregular and it's impossible to lead a personal life or have leisure time(4.16), and when they are o work for an excessively short time(4.16). This fact indicated that most of the dental technicians were exposed to a lot of stress in conjunction with job performance. 4. The main duties they took charge of didn't make any significant difference to their job stress, but yielded a significant difference to the extent of job stress in individual areas and the order of the most stressful one. Those who were engaged in grinding were most stressed from their own matters, whereas heavy workload was most stressful for those who were engaged in the other types of works. 5. As a result of seeing if their personal characteristics yielded any differences to job stress, the personal characteristics that made their job stress vary significantly were working hours, motivation of being a dental technician, job satisfaction and willingness to continue doing dental technology works. There was a tendency that longer working hours led to severer job stress, and those who chose to be a dental technician according to their own aptitude were less stressed than the others who became a dental technician because of economic reason or advices from others. And the people who were satisfied with their job were exposed to less job stress than the others who weren't, and those who had an intention to keep that job as much as possible were less stressed, compared to the others who hadn't.

• The Journal of Industrial Distribution & Business
• /
• v.2 no.1
• /
• pp.5-15
• /
• 2011

Prior to the introduction of the CRM, we need to analyze the characteristics and the situations of the company, and should establish a clear vision of the CRM. And each company should identify elements and technologies for introducing the most suitable CRM for them, and optimize them, with long-term perspective. In addition, it requires the implementation strategy which integrates the existing company's routine marketing activities with the concept of the CRM. According to the implementation strategy, the company should improve the business process which is the most effective in investment step by step, and the information system strategy, which develops system investment gradually, should harmonize with it. First, we recognized that raising the company value is important by maximizing customer lifetime value (LTV) by understanding customer needs, and achieving the company's goal through customer satisfaction. Second, we understood that adopting the CRM should be accompanied by changes in the structure, business process and customer contact channels, and it can be successfully integrated with business when it gets proper understandings and attentions of the management. Third, the reality is that there are few cases of successful implementation of domestic companies, and some companies that successfully implement the system mean nothing but implement the solution for developing the CRM. Therefore, it needs to be observed for the long haul, and it seems that we need to approach more systematically to implementation cases for each industry about implementation of the CRM. Fourth, the CRM is no longer the preserve of major companies, and it is the time that medium and small sized enterprises also need it. Taking lesson from Switzerland's small size store merchants who successfully adopt right size of the CRM for their business, for domestic medium and small sized enterprises, the necessity to develop business through developing the CRM models which fit their situations and maintaining relationships with customers has been grown. Fifth, for adopting the CRM business processes, changing or converting the CRM system to the model which fits the company's situation is important rather than applying the advanced company's CRM system model. In other words, the CRM solution which can maximize their own strength by developing the CRM program that makes the most of features and characteristics of the company should be adopted.

• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.365-373
• /
• 2007

Destruction of oral soft and hard tissues and resulting problems seriously affect the life quality of xerostomic patients. Although artificial saliva is the only regimen for xerostomic patients with totally abolished salivary glands, currently available artificial salivas give restricted satisfaction to patients. The purpose of this study was to contribute to the development of ideal artificial saliva through comparing viscosity and wettability between CMC solutions and human saliva. Commercially-available CMC is dissolved in simulated salivary buffer (SSB) and distilled deionized water (DDW). Various properties of human whole saliva, human glandular saliva, and a CMC-based saliva substitutes known as Salivart and Moi-Stir were compared with those of CMC solutions. Viscosity was measured with a cone-and-plate digital viscometer at six different shear rates, while wettability on acrylic resin and Co-Cr alloy was determined by the contact angle. The obtained results were as follows: 1. The viscosity of CMC solutions was proportional to CMC concentration, with 0.5% CMC solution displaying similar viscosity to stimulated whole saliva. Where as a decrease in contact angle was found with increasing CMC concentration. 2. The viscosity of human saliva was found to be inversely proportional to shear rate, a non-Newtonian (pseudoplastic) trait of biological fluids. The mean viscosity values at various shear rates increased as follows: stimulated parotid saliva, stimulated whole saliva, unstimulated whole saliva, stimulated submandibular-sublingual saliva. 3. Contact angles of human saliva on the tested solid phases were inversely correlated with viscosity, namely decreasing in the order stimulated parotid saliva, stimulated whole saliva, unstimulated whole saliva, stimulated submandibular-sublingual saliva. 4. Boiled CMC dissolved in SSB (CMC-SSB) had a lower viscosity than CMC-SSB (P < 0.01 at shear rate of $90s^{-1}$). 5. For human saliva, contact angles on acrylic resin were significantly lower than those on Co-Cr alloy (P < 0.01). 6. Comparing CMC solutions with human saliva, the contact angles between acrylic resin and human saliva solutions were significantly lower than those between acrylic resin and CMC solutions, including Salivart and Moi-Stir (P <0.01). The effectiveness of CMC solutions in terms of their rheological properties was objectively confirmed, indicating a vital role for CMC in the development of effective salivary substitutes.

• Journal of Distribution Science
• /
• v.14 no.3
• /
• pp.55-62
• /
• 2016

Purpose - Average using time of smart-phone for Korean people is 3 hours 39 minutes and most people who are using a computer at home and their workplace can be affected over force to neck and shoulder due to unstable body posture. musculoskeletal disorders which caused by unstable body posture can affect strongly to decrease work efficiency. So this research is designed to measure the effect of using computer & smart-phone on decreased work efficiency due to musculoskeletal disorders and mediating effect between decreased work efficiency and musculoskeletal disorders. Research Design, Data, and Methodology - The author has developed a questionnaire with 6 hypothesis on the basis of previous research result with 5 constructs. The questionnaires were also made by interview and E-mail. 300 copies of questionnaires were distributed and 282 questionnaire were used for the analysis as valid data responses. SPSS ver.21.0 were used and made Cronbach's α and reliability test, correlation, Baron & Kenny 3 step mediated regression analysis. Result - Cronbach's α shows 0.770~0.954 and C.R. is 0.963~0.997 which is higher than 0.7. and AVE was 0.867~0.933. So the data are all acceptable condition. Using for a long time of a computer & smart-phone has a positive effect on musculoskeletal disorders. This means, it can cause musculoskeletal disorders if people use a computer & smart-phone for a long time due to unstable body posture. And musculoskeletal disorders can effect strongly decrease work efficiency. This study also found out that a long time of using computer can cause musculoskeletal disorders rather than using smart-phone a long time. To check mediate effect of musculoskeletal disorders between using a computer & smart-phone and Decreased Work Efficiency, author used 3-step mediated regression analysis of Baron & Kenny (1986). Using a computer for a long time mediate partially and using a smart-phone for a long time mediate completely. This means that using a smart-phone a long time is not the actual reason to decrease work efficiency. But using level of smart-phone is increasing rapidly day by day. So we need to make additional research about this matter seriously. Conclusion - Nowadays, people can not live on without a computer & smart-phone even a moment. But, using a computer for a long time will affect to cause musculoskeletal disorders and it will effect strongly to decrease work efficiency. Before, we thought over that musculoskeletal disorders were diseases of elder people. But, we found out from this study that musculoskeletal disorders can be happen to any people, even children, or workers in heavy industry or engaged in brain work. So we need to be careful when we use a computer for a long time. People also need to be careful to keep correct body posture when using both a computer and smart-phone since a smart-phone became more popular and using time level became longer. Due to increased income and living standard of people, physical growth of young people is so rapid. But the physical environment of society is not suitable for them since it can not follow up the speed of growth. Suitable work table is very important to prevent musculoskeletal disorder which can affect decrease work efficiency. For a person, a society or country, increased productivity is very important since it can directly connected to the job satisfaction. Education and reeducation for the people is also important, but to teach them how to keep good condition of health will be more important since it can increase the quality of work efficiency and quality of life. Computer and Smart-phone is one the best invention of modern society, but it can cause mental and physical disease which can affect decrease work efficiency and productivity. So it is necessary to observe attentively for the situation continually.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.51-60
• /
• 2006

Nowadays, reading text from screens is prevailing in everyday life. The advent of mobile information devices such as a cellular phone, PDA, and e-book reader facilitates us to enjoy various text-based contents any time and anywhere. Most studies comparing screen and paper readability show that screens are less readable than paper. Furthermore, the decrease of line length and number of lines that can be displayed on the screen of mobile information devices deteriorate text readability. This study investigated parameters affecting text readability on small screens and designed a new text layout to improve readability. We suggested a diagonally splitted layout of rectangular column, which is supposed to facilitate eye movement to trace text flow with ease. The experiment comparing readability between a traditional rectangular column and a diagonally splitted column was conducted. The result of experiment revealed that there is no significant difference between the two text layouts in terms of subjective satisfaction of reading task and a level of comprehension. However, in the screen size of $4000mm^2\;and\;8000mm^2$, reading speed was increased 18.9% and 34.0% respectively from a traditional rectangular column to a diagonally splitted column. We conducted a consecutive experiment to scrutinize the cause that improved the performance in readability task remarkably. The readability of text in a traditional rectangular column was compared with a left triangular column and a right triangular column in the condition of $4000mm^2/3:1$ ratio screen. The performance measurements revealed that participants read 21.1% and 67.6% faster respectively with the left triangular column and right triangular column than with the rectangular column. In consequence, the improvement of readability in the diagonally splitted column was attributed mainly to the increase of reading speed in the right triangular column. This research verified that the diagonally splitted column improve text readability on a small screen and this result is expected to make a contribution to designing an efficient text layout for mobile information devices

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.2
• /
• pp.69-81
• /
• 2008

Purpose: To reduce side effects in image guided radiation therapy (IGRT) and to improve the quality of life of patients, also to meet accurate SETUP condition for patients, the various SETUP correction conditions were compared and evaluated by using on board imager (OBI) during the SETUP. Materials and Methods: Each 30 cases of the head, the neck, the chest, the belly, and the pelvis in 150 cases of IGRT patients was corrected after confirmation by using OBI at every 2∼3 day. Also, the difference of the SETUP through the skin-marker and the anatomic SETUP through the OBI was evaluated. Results: General SETUP errors (Transverse, Coronal, Sagittal) through the OBI at original SETUP position were Head & Neck: 1.3 mm, Brain: 2 mm, Chest: 3 mm, Abdoman: 3.7 mm, Pelvis: 4 mm. The patients with more that 3 mm in the error range were observed in the correction devices and the patient motions by confirming in treatment room. Moreover, in the case of female patients, the result came from the position of hairs during the Head & Neck, Brain tumor. Therefore, after another SETUP in each cases of over 3 mm in the error range, the treatment was carried out. Mean error values of each parts estimated after the correction were 1 mm for the head, 1.2 mm for the neck, 2.5 mm for the chest, 2.5 mm for the belly, and 2.6 mm for the pelvis. Conclusion: The result showed the correction of SETUP for each treatment through OBI is extremely difficult because of the importance of SETUP in radiation treatment. However, by establishing the average standard of the patients from this research result, the better patient satisfaction and treatment results could be obtained.

• Asia pacific journal of information systems
• /
• v.17 no.2
• /
• pp.97-122
• /
• 2007

Conventional networking and telecommunications infrastructure characterized by wires, fixed location, and inflexibility is giving way to mobile technologies. Numerous research reports point to the ultimate domination of wireless communication. With the increasing prevalence of advanced cell-phones, various mobile data services (hereafter MDS) are gaining popularity. Although cellular networks were originally introduced for voice communications, statistics indicate that data services are replacing the matured voice service as the growth engine for telecom service providers. For example, SK Telecom, the Korea's largest mobile service provider, reported that 25.6% of revenue and 28.5% of profit came from MDS in 2006 and the share is growing. Statistics also indicate that, in 2006, the average revenue per user (ARPU) for voice didn't change but MDS grew seven percents from the previous year, further highlighting its growth potential. MDS is defined "as an assortment of digital data services that can be accessed using a mobile device over a wide geographic area." A variety of MDS have been deployed, with a few reaching the status of killer applications. Many of them need to access the Internet through the cellular-phone infrastructure. In the past, when the cellular network didn't have acceptable bandwidth for data services, SMS (short messaging service) dominated MDS. Now, Internet-ready, next-generation cell-phones are driving rich digital data services into the fabric of everyday life, These include news on various topics, Internet search, mapping and location-based information, mobile banking and gaming, downloading (i.e., screen savers), multimedia streaming, and various communication services (i.e., email, short messaging, messenger, and chaffing). The huge economic stake MDS has on its stakeholders warrants focused research to understand associated dynamics behind its adoption. Lyytinen and Yoo(2002) pointed out the limitation of traditional adoption models in explaining the rapid diffusion of innovations such as P2P or mobile services. Also, despite the increasing popularity of MDS, unexpected drop in its usage is observed among some people. Intrigued by these observations, an exploratory study was conducted to examine decision factors of MDS usage. Data analysis revealed that the increase and decrease of MDS use was influenced by different forces. The findings of the exploratory study triggered our confirmatory research effort to validate the uni-directionality of studied factors in affecting MDS usage. This differs from extant studies of IS/IT adoption that are largely grounded on the assumption of bi-directionality of explanatory variables in determining the level of dependent variables (i.e., user satisfaction, service usage). The research goal is, therefore, to examine if increase and decrease in the usage of MDS are explained by two separate groups of variables pertaining to information quality and system quality. For this, we investigate following research questions: (1) Does the information quality of MDS increase service usage?; (2) Does the system quality of MDS decrease service usage?; and (3) Does user motivation for subscribing MDS moderate the effect information and system quality have on service usage? The research questions and subsequent analysis are grounded on the two factor theory pioneered by Hertzberg et al(1959). To answer the research questions, in the first, an exploratory study based on 378 survey responses was conducted to learn about important decision factors of MDS usage. It revealed discrepancy between the influencing forces of usage increase and those of usage decrease. Based on the findings from the exploratory study and the two-factor theory, we postulated information quality as the motivator and system quality as the de-motivator (or hygiene) of MDS. Then, a confirmative study was undertaken on their respective role in encouraging and discouraging the usage of mobile data service.