• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.229-235
• /
• 2007

Reliability is the ability of a system or component to perform its required functions under stated conditions for a specified period of time. It is recognized that reliability is a key point of technical competency. This paper presents background of reliability and accelerated test concept, and verified the MTBF and assessed safety of airborne starter-generator through accelerated life test.

• Journal of Drive and Control
• /
• v.14 no.1
• /
• pp.29-34
• /
• 2017

This study analyzed a life test method for a power take-off (PTO) gearbox. An engine transfers mechanical power (rotation and torque) to a hydraulic pump through a PTO Gearbox with one input shaft and three output shafts. PTO gear box durability under high loads over long time periods was tested using dynamometers. In order to reflect the rated operating conditions, power must be distributed to each output shaft, and experiments were conducted under various conditions to verify the characteristics of the distributed power. An accelerated life test was designed using speed and torque as acceleration factors. Also, efficiency tests were conducted under various load conditions. Also, a lubrication oil composition analysis was performed to analyze gearbox wear status.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.91-96
• /
• 2010

The hydraulic hose can be divided with the low pressure, the medium pressure, and the high pressure hose according to the applied pressure. The power steering system in a passenger car can be divided with the high pressure and the low pressure hose. This study deals with the life prediction for high pressure hose to be given impulse pressure which was generated in turning the car. To adjust with external and internal condition, impulse pressure and oil temperature need to be controlled with impulse test system. The result, which is only controlled with the pressure and oil temperature, adapted Calibrated Accelerated Life Test(CALT) method to predict the life of the high pressure hose and analyzed the swagging part by finite element method during the impulse test.

• Journal of Applied Reliability
• /
• v.13 no.1
• /
• pp.55-63
• /
• 2013

For a reliability assessment of large machinery parts, reliable data should be obtained from testing many samples for a long time. However, in case of testing these samples, testing cost is excessive; in case of life test for long time, power consumption is high; and in case of accelerated test by over load, very high cost is required to build the life testing device. Especially it is very frequent that the expensive device's life has ended during a accelerated test by over load. In this study, the design mechanism of the life testing device which excels in energy saving during the reliability test of large machinery parts has been introduced.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1016-1022
• /
• 2007

It is demanded to produce the safety evidence documents in other to approval safety characteristic of railway signaling system which stands is included, it is demanding from IEC 62425 standards. Also it is express clearly that safety assessment if signaling system has to be verification of these safety evidence documents. This Safety Case has the results of safety activity through system life-cycle, such as hazard lists, hazard identification and analysis, risk assessment and countermeasure, verification and test results. Consequently, first of all, the analysis and verification of these Safety Case documents has to be accomplished to approval and acceptance of signaling system safety. And also if the safety assessor was want, it is able to be experimental test auditory which is, arbitrary faults injection test, to above described documents verification. In this paper, the contents and architecture of Safety Case are presented as first steps of safety assessment technology establishment for railway signaling system.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.193-198
• /
• 2000

The small punch test have been developed to evaluate the material strength of the power plant components. This small punch test specimen is very small than the conventional strength test specimens. Korea Electric Power Research Institute (KEPRI) have been applying this test to assess accurately the life of thermal power plant and enhancing the reliability. The small punch test for gas turbine blades is under development. It's possible to compare the relative strength among the same materials having different operation histories. In this paper, the strength reductions of gas turbine materials are investigated by the small punch tests. All materials shows the almost same strength and deformation with the allowable deviation. At the same test temperature, the damaged material has the maximum load value. The strength reduction is not shown in this small punch test results.

• Safety and Health at Work
• /
• v.4 no.1
• /
• pp.37-45
• /
• 2013

Objectives: As quality of work-life (QWL) among nurses affects both patient care and institutional standards, assessment regarding QWL for the profession is important. Work-related Quality of Life Scale (WRQOLS) is a reliable QWL assessment tool for the nursing profession. To develop a Chinese version of the WRQOLS-2 and to examine its psychometric properties as an instrument to assess QWL for the nursing profession in China. Methods: Forward and back translating procedures were used to develop the Chinese version of WRQOLS-2. Six nursing experts participated in content validity evaluation and 352 registered nurses (RNs) participated in the tests. After a two-week interval, 70 of the RNs were retested. Structural validity was examined by principal components analysis and the Cronbach's alphas calculated. The respective independent sample t-test and intra-class correlation coefficient were used to analyze known-group validity and test-retest reliability. Results: One item was rephrased for adaptation to Chinese organizational cultures. The content validity index of the scale was 0.98. Principal components analysis resulted in a seven-factor model, accounting for 62% of total variance, with Cronbach's alphas for subscales ranging from 0.71 to 0.88. Known-group validity was established in the assessment results of the participants in permanent employment vs. contract employment (t = 2.895, p < 0.01). Good test-retest reliability was observed (r = 0.88, p < 0.01). Conclusion: The translated Chinese version of the WRQOLS-2 has sufficient validity and reliability so that it can be used to evaluate the QWL among nurses in mainland China.

• Journal of Applied Reliability
• /
• v.12 no.3
• /
• pp.165-176
• /
• 2012

Hydrostatic bearing improves performance and life time of a product by avoiding solid friction and reducing viscosity friction with the help of creating pressure equilibrium between two faces doing relative motion. This study suggests failure analysis and test evaluation for a ball joint that adopts the hydrostatic bearing and introduces the entire process to improve reliability of the product by design improvement. A typical failure is growth of friction torque by solid friction, and its failure cause is determined and the improvement is proposed. Finally, reliability improvement is established by analysis of the results of before and after acceleration test.

• Journal of Applied Reliability
• /
• v.9 no.4
• /
• pp.291-302
• /
• 2009

Accelerated and field degradation tests are performed for reliability assessment of an anticorrosive paint for steel structures. Test data were analyzed to obtain the degradation model and the life time distributions of the paint. A power law degradation model and lognormal performance distribution were used to predict the lifetime of the anticorrosive paint and the method of finding an acceleration factor is provided.

• Journal of Applied Reliability
• /
• v.14 no.4
• /
• pp.213-219
• /
• 2014

Wind turbine, which is attracting part of the renewable energy and is researching continuously, is going to be large size for high efficiency. There is a yaw system rotating the nacelle, weighted about 600 tons, to be perpendicular with the wind direction blowing in the large wind turbine. The wind turbine is focusing on the reliability improvement because working environment effect is bigger than any other points and specially, the reliability improvement of the yaw drive is required by the customer because it is the key component of the wind turbine. Because of this, the establishment of criteria for yaw drive is required because yaw drive system is the part of the wind turbine closely related with ensuring the reliability. So, this study did the failure analysis of the yaw drive system, which is consisted with 10 sets of yaw drives through researching and analyzing the site conditions. Also this study designed the life test method based on the failure analysis and working condition of the yaw drive. To design the accelerated life test of the yaw drive, this study reviewed the torque, lubrication condition, and frequency of use and etc. Finally, this selected the torque as the acceleration factor which is affected mainly to the system and also, the test equipment was developed based on the requirement of the life and performance test.