• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.15
• /
• pp.6343-6347
• /
• 2014

Multi-target drug design, in which drugs are designed as single molecules to simultaneously modulate multiple physiological targets, is an important strategy in the field of drug discovery. QT-011, a tamibarotene-furoxan derivative, was here prepared and proposed to exert synergistic effects on antileukemia by releasing nitric oxide and tamibarotene. Compared with tamibarotene itself, QT-011 displayed stronger antiproliferative effects on U937 and HL-60 cells and was more effective evaluated in a nude mice U937 xenograft model in vivo. In addition, QT-011 could release nitric oxide which might contribute to the antiproliferative activity. Autodocking assays showed that QT-011 fits well with the hydrophobic pocket of retinoic acid receptors. Taken together, these results suggest that QT-011 might be a highly effective derivative of tamibarotene and a potential candidate compound as antileukemia agent.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.3
• /
• pp.576-599
• /
• 2013

Protocol reverse engineering is useful for many security applications, including intelligent fuzzing, intrusion detection and fingerprint generation. Since manual reverse engineering is a time-consuming and tedious process, a number of automatic techniques have been proposed. However, the accuracy of these techniques is limited due to the complexity of binary instructions, and the derived formats have missed constraints that are critical for security applications. In this paper, we propose a new approach for protocol format extraction. Our approach reasons about only the evaluation behavior of a program on the input message from concolic execution, and enables field identification and constraint inference with high accuracy. Moreover, it performs binary analysis with low complexity by reducing modern instruction sets to BIL, a small, well-specified and architecture-independent language. We have implemented our approach into a system called Icefex and evaluated it over real-world implementations of DNS, eDonkey, FTP, HTTP and McAfee ePO protocols. Experimental results show that our approach is more accurate and effective at extracting protocol formats than other approaches.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.4
• /
• pp.633-646
• /
• 2023

The increases in UAVs(Unman Aerial Vehicle) such as drone result in safety issues and the threat of illegal drone as well. Recognizing the need for Drone forensics, domestic and foreign organizations and agencies are trying to establish drone forensic guidelines. The definition of Drone forensic artifacts and examination of forensic tools must be provided, in order to establish a practical drone forensic framework on security sites and also the concept of drone live forensic which provides meaningful data that can be extracted in a live state. In this study, the drone forensic methodology covering various types of drones is explained, and the practical forensic methodology with live forensic PoC(Proof Of Concept) tools; LiPFo(Live-PX4-Forenensic) is proposed.

• Journal of Powder Materials
• /
• v.31 no.1
• /
• pp.23-29
• /
• 2024

This study investigates the effect of the microstructure of Li_1.3Al_0.3Ti_1.7(PO₄)₃ (LATP), a solid electrolyte, on its ionic conductivity. Solid electrolytes, a key component in electrochemical energy storage devices such as batteries, differ from traditional liquid electrolytes by utilizing solid-state ionic conductors. LATP, characterized by its NASICON structure, facilitates rapid lithium-ion movement and exhibits relatively high ionic conductivity, chemical stability, and good electrochemical compatibility. In this study, the microstructure and ionic conductivity of LATP specimens sintered at 850, 900, and 950℃ for various sintering times are analyzed. The results indicate that the changes in the microstructure due to sintering temperature and time significantly affect ionic conductivity. Notably, the specimens sintered at 900℃ for 30 min exhibit high ionic conductivity. This study presents a method to optimize the ionic conductivity of LATP. Additionally, it underscores the need for a deeper understanding of the Li-ion diffusion mechanism and quantitative microstructure analysis.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.2
• /
• pp.141-144
• /
• 2003

Proton conducting polymeric gels as the electrolytes of electrochemical capacitors have been prepared by two different methods: 1) swelling a polymethacrylate-based polymer matrix in aqueous solutions of inorganic and organic acids, and 2) polymerizing complexes of anhydrous acids and prepolymers with organic plasticizer. The FT-IR spectra strongly suggest that the carbonyl groups in the polymer matrix interact with protons from the doped acids. High ionic (proton) conductivity in the range of $6\times10^{-4}-4\times10^{-2}\;S\;cm^{-1}$ was obtained at room temperature for the aqueous gels. The non-aqueous polymer complexes showed rather low ionic conductivity, but it was about $10^{-3}\;S\;cm^{-1}\;at\;70^{\circ}C$ for the $H_3PO_4$ doped polymer electrolyte. The mechanisms of ion (proton) conduction in the polymeric systems are discussed.

• Korean Journal of Crystallography
• /
• v.11 no.1
• /
• pp.34-41
• /
• 2000

The group-theoretical approach analyzing the domain structure and the domain wall orientations of the ferroelastic crystal was introduced. These theoretical results were investigated by comparing them with the experimental results of several ferroelastic crystals, CsPbCl₃, Pb₃(PO₄)₂, and LiCsSO₄, which were grown by the Czochralski and solution methods, respectively. both results were agreed well and also consistent with those of previous works such s the strain method and the geometrical consideration. The group-theoretical approach showed that the ferroelastic domain walls must be the crystallographical prominent planes with fixed indices and classified by the symmetry elements characterizing the permissible domain walls. So the group-theoretical approach could be suggested as a new method for analyzing the structure of the ferroelastic domain and domain walls.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.973-974
• /
• 2008

Optically transparent and flexible electronic circuits and displays are attractive for next-generation visual technologies, including windshield displays, head-mounted displays, and transparent screen monitors. Here we report on the fabrication of transparent transistors and circuits based on the combination of nanoscopic dielectrics and organic, inorganic, or hybrid semiconductors. Furthermore, the first demonstration of a transparent and flexible AMOLED display driven solely by $In_2O_3$ nanowire transistors (NWTs) is reported. The display region exhibits an optical transmittance of ~35% and a green peak luminance of ${\sim}300\;cd/m^2$. These results indicate that NWT-based drive circuits are attractive for fully transparent display technologies.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.255-257
• /
• 2018

본 논문은 리튬폴리머 배터리를 입력 전압원으로 High-Altitude Electomagnetic Pulse (HEMP) 구동용 고밀도 고전압 충전기의 설계를 다루며, 제안하는 충전기는 독특한 3상 델타-와이 변압기 구조를 갖는 5.4kW 용량의 LCC 공진 컨버터로 제작 되었다. 풀브릿지 형태로 4개의 스위치를 사용하는 단상 충전기는 동일 용량을 설계하는 경우, 입력 전류량이 높아 소자의 발열로 충전기의 동작 시간이 제한되고 누설 인덕턴스에 의한 스파이크성 전압이 크게 발생하여 충전기의 안정적인 구동이 어려운 문제점이 있다. 이를 해결하기 위해 6개의 스위치를 사용하는 삼상 충전기를 HEMP 구동용 고밀도 고전압 충전기에 적용하였다. 동일 용량의 단상과 삼상 충전기 설계과정과 시뮬레이션 결과를 분석해 각 충전기의 차이점을 비교하고, 저항 및 커패시터 부하 실험으로 제안하는 삼상 충전기의 동작과 성능을 검증하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.374-377
• /
• 2009

The characteristics of the deposited thin films of the zinc oxide (ZnO) at different oxygen pressures will be elucidated in this work. The resistivity of ZnO thin films were dominated by the carrier concentration under high oxygen pressure conditions while controlled by the carrier mobility at low oxygen ambiences. In addition, we will show the characteristics of the transparent ZnO based thin film transistor (TFT) fabricated at a full room temperature process with gate dielectric of gadolinium oxide ($Gd_2O_3$) thin films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.228-231
• /
• 1999

The preparation and electrical properties of LIPON electrolyte were investigated in order to fabricate all solid state thin film battery. The LIPON thin film was deposited by r.f. sputtering of Li$_3$PO$_4$ target in O$_2$-N$_2$ mixtures. The LIPON deposited at N$_2$+10% O$_2$ ratio had a conductivity at 25 $^{\circ}C$ of 1.8${\times}$10$\^$-6/S/cm. The ion conductivity of the LIPON films decreased as the O$_2$ content of the process gas increased.