• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.865-870
• /
• 2014

Gold nanoparticles (AuNPs) were synthesized by laser (Nd:YAG, ${\lambda}$ = 1064 nm) ablation of a gold target immersed in various aqueous electrolyte solutions (7 mM of LiCl, NaCl, KCl, NaBr, and NaI) as well as in deionized water. The surface plasmon absorption and EDX of AuNPs so produced as well as their TEM images were analyzed to investigate the effects of ambient ions on the growth and aggregation of NPs. The size of AuNPs was reduced by laser ablation in the presence of chloride and bromide ions while it increased drastically when AuNPs were formed in iodide solution. Interestingly, triangular nanoplates were synthesized only in iodide solution. Surface chemistry on AuNPs in various electrolyte solutions was explored to elucidate the role of ions on the size and stability of AuNPs.

• 한국염색가공학회지
• /
• 제10권1호
• /
• pp.38-42
• /
• 1998

Both cellulose and chitin together were dissolved in DMAc/LiCl and these solutions were extruded into coagulant of $DMAc/H_2O$. Fibers thus obtained were treated in NaOH aqueous solution. Results showed that the fiber surface contains celluose and chitosan. This means that these fibers treated are composed of three components, ie, cellulose, chitin, and chitosan. These fiber showed secure antibacterial and mechanical properties.

• Journal of Electrochemical Science and Technology
• /
• 제14권1호
• /
• pp.75-84
• /
• 2023

The accumulation of spent carbide (YG8), not only pollutes the environment but also causes waste of tungsten, cobalt and other rare metal resources. To better address this issue, we proposed a combined electrochemical separation process of low-temperature aqueous solution and high-temperature molten salt for tungsten and cobalt. H₂WO₄ was obtained from spent carbide in an aqueous solution, and we calcined it to obtain WO₃, which was used as a raw material to obtain tungsten by using molten salt electrodeposition. The influence of the current efficiency and the electrochemical behavior of the discharge precipitation of W(VI) were also studied. The calcination results showed that the morphology of WO₃ was regular and there were no other impurities. The maximum current efficiency of 82.91% was achieved in a series of electrodeposition experiments. According to XRD and SEM analysis, the recovered product was high purity tungsten, which belongs to the simple cubic crystal system. In the W(VI) reduction mechanism experiments, the electrochemical process of W(VI) in NaCl-Na₂WO₄-WO₃ molten salt was investigated using linear scanning voltammetry (LSV) and chronoamperometry in a three-electrode system. The LSV showed that W(VI) was reduced at the cathode in two steps and the electrode reaction was controlled by diffusion. The fitting results of chronoamperometry showed that the nucleation mechanism of W(VI) was an instantaneous nucleation mode, and the diffusion coefficient was 7.379×10^-10 cm²·s^-1.

• 공업화학
• /
• 제8권6호
• /
• pp.1022-1028
• /
• 1997

본 연구에서는 1M $LiClO_4/PC$ 유기 용액 중에 존재하는 리튬 이온의 층간 반응에 의하여 전기 발색 현상을 나타내는 전자-선 증발법으로 제조된 비정질의 텅스텐 산화물 박막과 전해질 계면에서의 전기화학적 특성들을 연구하기 위하여 음극 Tafel 분극법, 순환 전류-전위법 및 전기량 적정법 등의 전기화학 측정법과 X선 회절 분석법을 이용한 박막의 결정 상태 조사 등이 수행되었다. 특히 다중 순환 전류-전위 곡선으로부터 리튬 이온의 층간 반응은 발색 반응에 대한 인가 과전압이 약 1.0V 이내에서는 안정된 소 발색의 가역적 현상을 나타내었으나, 발색 반응에 대한 인가 과전압이 1.5V일 때는 발색 시 삽입된 박막 내부의 리튬이 소색 시 완전히 빠져 나오지 못하여, 박막 내부에 리튬이 축적되는 현상을 나타내었으며, 적은 순환 횟수임에도 불구하고 소 발색의 전류 밀도가 감소되는 것이 조사되어 발색에 필요한 인가 과전압의 한계가 존재함을 알 수 있었다.

• Macromolecular Research
• /
• 제16권8호
• /
• pp.711-716
• /
• 2008

We synthesized gold nanonetwork using the amphiphilic polymer brush, poly(oxyethylene) containing decyltri(oxyethylene)thiomethyl ($C_{10}H_{21}(OCH_2CH_2)_3SCH_2-$) side groups, as a stabilizer and/or a template. When tetrabutylammonium borohydride solution in THF was added to a mixture solution of the polymer and $LiAuCl_4$ in THF, 0-D gold nanomaterials were obtained. However, when an aqueous solution of sodium borohydride was added, gold nanonetworks were synthesized. The composites composed of polymer/0-D gold nanomaterials and polymer/gold nanonetworks showed electrical conductivities of ${\sim}10^{-9}$ and ${\sim}10^{-3}S/cm$, respectively, which indicated that the gold nanonetworks increased the electrical conductivity.

• 한국결정성장학회지
• /
• 제6권4호
• /
• pp.600-608
• /
• 1996

리튬 이온이 intercalation되어 스핀넬 구조를 이루고 있는 $Li_{x}Mn_{2}O_{4}(0.2{\leq}x{\leq}2.0)$의 구조적 특성을 X-선 회절분석과 Li/1M $LiClO_{4}$-propylene carbonate solution/$Li_{x}Mn_{2}O_{4}$ 전지에서 이들의 구조적 특징에 의한 전기화학적 특성을 연구하였다. $Li_{x}Mn_{2}O_{4}$의 전기화학적 특성에 대한 조성과 반응온도의 영향은 상전이 현상과, 결정 상수 측정과 열분석에 의하여 연구하였다. 산처리 후 $Li_{x}Mn_{2}O_{4}$는 거의 순수한 ${\lambda}-MnO_{2}$구조로 상전이 되었으며 이때 격자상수 $a_{c}$가 8.255에서 $8.031\;{\AA}$으로 수축되었다. $Li_{x}Mn_{2}O_{4}$의 조성 범위가 $0.2{\leq}x{\leq}0.6$일 때 격자상수 $8.255\;{\AA}$의 단일상을 나타내며 3.9~3.7 V의 전위 평탄 영역을 나타낸다.

• 전기화학회지
• /
• 제14권3호
• /
• pp.131-137
• /
• 2011

[ $LiMn_2O_4$ ] $Mn^{2+}$이온 용출현상 연구를 위한 간단하고 신속한 전기화학적 $Mn^{2+}$이온 분석법을 정립하였다. 이 분석법은 완충용액에서 $Mn^{2+}$이온이 $Mn^{4+}(MnO_2)$로 산화되는 원리를 이용한다. 최적조건 (pH 8.9 0.04 M $NH_3-NH_4Cl$ 완충용액 및 glassy carbon 작업전극)에서, Linear sweep voltammetry(LSV) 측정에 대해 $5{\mu}M-100{\mu}M$ (0.275-5.5 ppm) $Mn^{2+}$이온 범위에서, differential pulse voltammetry (DPV) 측정에 대해 $0.2{\mu}M-10{\mu}M$ (0.011-0.55 ppm) 범위에서 선형적 응답 특성을 확인하였다. 또한, 측정용액에 리튬 이차전지용 전해액 ($LiPF_6$, EC, EMC)이 첨가할 경우, 첨가량에 비례하여 $Mn^{2+}$ 이온의 산화 전류 감소하였는데, 이러한 감소의 주요 원인은 EMC보다는 $LiPF_6$와 EC성분임을 확인하였다.

• Membrane and Water Treatment
• /
• 제8권3호
• /
• pp.225-244
• /
• 2017

A novel thin-film nanocomposite (TFN) reverse osmosis (RO)/non-woven fabric (NWF) membrane was prepared by adding zinc oxide (ZnO) nanospheres ($30{\pm}10nm$) during the interfacial polymerization process of m-phenylenediamine (MPD) and trimesoyl chloride (TMC) on self-made polysulfone (PSF) membrane/polyester (PET) non-woven fabric support. The improved performance of TFN RO membrane was verified in terms of water contact angle (WCA), water flux, salt rejection, antifouling properties and chlorine resistance. The results showed that the WCA value of TFN RO surface had a continuous decrease with the increasing of ZnO content in MPD aqueous solution. The water flux of composite TFN RO membranes acquired a remarkable increase with a stable high solute rejection (94.5 %) in $1g{\cdot}L^{-1}$ NaCl aqueous solution under the optimized addition amount of ZnO (1 wt%). The continuous testing of membrane separation performance after the immersion in sodium hypochlorite solution indicated that the introduction of ZnO nanospheres also dramatically enhanced the antifouling properties and the chlorine resistance of composite RO membranes.

• 대한의용생체공학회:의공학회지
• /
• 제8권2호
• /
• pp.123-134
• /
• 1987

The transport phenomena of alkali metal chlorides through poly(2 hydroxyethyl methacrylate) hydrogel membrane have been studied using electrodialysis. The hydrogel membranes were prepared by the polymerization of 2-hydroxvethyl methacrylate in the presence of 45%(V/V) H2O and ethyleneglycodimethacrylate. The initiator used in the polymerization was azobismethylisobutyrate (AMIB) prepared from azobisiobtyronitrile (AIBN) using Mortimer method. The permeability of alkali metal chlorides such LiCl, NaCl and KCI at 50 voltage was obtained. The permeability of NaCl was also observed at 30, 40, 50, and 60 voltages respectively. The concentration of solutes permeated through the membrane was measurer by flame photometry. The experimental results have been discussed with the comparison of apparent solute molecular size, the self-diffusion coefficient of solutes, the transport number of cations in aqueous solution. These indic aloes that poly(2 hydroxyethyl methacrylate) hydrogel membrane shows a specific selectivity for sodium ion.

• Advances in environmental research
• /
• 제2권3호
• /
• pp.245-260
• /
• 2013

Biosorption represents a technological innovation as well as a cost effective excellent remediation technology for cleaning up radionuclides from aqueous environment. In the present study, a bacteria strain FB12 with high adsorption rate of uranium ion was isolated from the vicinity of the nuclear power plant. It was tentatively identified as Bacillus sp.FB12 according to the 16S rDNA sequencing. Efforts were made to further improve the adsorption rate and genetic stability by UV irradiation and UV-LiCl cooperative mutagenesis. The improved strain named Bacillus sp.UV32 obtains excellent genetic stability and a high adsorption rate of 95.9%. The adsorption of uranium U (VI) by Bacillus sp.UV32 from aqueous solution was examined as a function of metal ion concentration, cell concentration, adsorption time, pH, temperature, and the presence of some foreign ions. The adsorption process of U (VI) was found to follow the pseudo-second-order kinetic equation. The adsorption isotherm study indicated that it preferably followed the Langmuir adsorption isotherm. The thermodynamic parameters values calculated clearly indicated that the adsorption process was feasible, spontaneous and endothermic in nature. These properties show that Bacillus sp.UV32 has potential application in the removal of uranium (VI) from the radioactive wastewater.