• 제목/요약/키워드: LiBr/물

검색결과 32건 처리시간 0.014초

냉수 대온도차 흡수식 냉동기용 2단 증발기/ 흡수기 최적 설계 (Optimum design of the Characteristics of Double Stage Evaporator/Absorber for Large temperature Difference Absorption System)

  • 박찬우;임익태;강용태
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 동계학술발표대회 논문집
    • /
    • pp.203-211
    • /
    • 2008
  • The optimal design of two stage evaporation & absorption system which is related to the large temperature difference system was investigated numerically in the absorption refrigeration system. The concentrations at inlet & oulet of absorber are 62.9% and 56.9%, but in two stage absorption system the values are 62.2% and 56.2%. Therefore strong solution & weak solution became diluted than the standard value. The amount of weak solution circulation can be reduced in absorption refrigeration system, and the sensible heat load is more reduced to enhance the COP of system. As UAR is increased, COP becomes larger, and this means the role of top section is more important than bottom section in two stage evaporation & absorption system. But the increase of COP becomes slower at 0.7 of UAR ratio. The performance of Type2 is higher than Type1 in COP with the flow direction of cooling waters. This phenomena is due to the active absorption of vapor -absorption & lower temp. cooling water is more effective. The pressure at bottom section becomes higher & that at top section becomes lower and therefore the circulation rate can be diminished more.

  • PDF

죽염 제조공정에 따른 이산화황, 미네랄 함량 및 이화학적 특성 (Sulfur Dioxide, Mineral Contents and Physicochemical Properties Generated during Manufacture of Bamboo Salt)

  • 김학렬;이성재;이정희;김인철
    • 한국식품영양과학회지
    • /
    • 제43권8호
    • /
    • pp.1248-1256
    • /
    • 2014
  • 자죽염(purple bamboo salt; PBS)을 제조하는 공정에 영향을 미치는 원염(갯벌천일염, MSS; 죽염, BS)의 종류, 대나무 첨가에 따른 BS의 이화학적 특성, 황 화합물, 미네랄 함량 및 환원력을 비교 분석하고, 이를 통해 PBS에 함유된 $SO_2$와 산화환원전위(ORP)의 발생 원인을 분석하였다. BS를 고온에서 용융시켜 제조한 PBS에서 630 ppm의 $SO_2$가 검출되었다. PBS의 원료 염과 RB에서는 $SO_2$가 검출되지 않았으나, 염화물, 황산염류, 탄산염류와 대나무(RB)를 함께 탄화시켜 $SO_2$ 검출 원인을 확인한 결과 황산칼륨에 의해 782 ppm이 발생하였다. BS의 $SO_2$는 BSRB1(13.88)~BSRB4(109.13 ppm)에서만 발생하였고 $SO{_3}{^{2-}}$는 MSSRB4와 BSRB2~BSRB4에서만 발생하였으며, 시간이 경과함에 따라 증가되는 경향을 나타내었다. $SO_4{^{2-}}$는 시간이 지남에 따라 감소하는 경향을 나타내었으며 $SO_2$$SO_3{^{2-}}$가 많을수록 낮은 함량을 나타내었다. ORP는 모두 시간이 지남에 따라 증가하는 경향을 나타내었고 BS에서 더 높은 수준을 나타내었으며, BSRB4(-211.40 mV)에서 가장 높은 환원력을 나타내었다. 일반적 특성 중 불용분은 BS에서 더 높았으며 RB가 탄화되어 남은 물질들이 영향을 미친 것으로 판단된다. Ca, K, Mg의 경우 굽는 시간 경과에 따라 MSS는 감소, BS는 증가하는 경향을 나타내었다. BSRB4의 Ca는 1.4배, Mg는 1.5배 증가하였고 K 함량은 1.8배 더 높은 것으로 나타났다. 미량 미네랄은 굽는 시간 경과에 따라 MSS에서 Li, Al, Mn, Fe, Sr이 증가되었고, BS에서 Al, Fe, Ni가 증가하였다. 음이온(Cl, $NO_3$, Br)과 중금속(Pb, Cd, Hg, As)은 각 요인에 대한 영향을 받지 않았다. 결론적으로 BS의 기능성을 나타내는 환원력은 $SO_2$$SO_3{^{2-}}$와 같은 저분자 황화합물에 의한 것이며, 이는 한 번 굽는 과정을 거친 BS를 사용하고 이에 RB를 첨가하여 고온에서 용융하는 시간이 길수록 이들 황화물질이 많아져 환원력이 증가된다는 것을 의미하는 것이다.