• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권3호
• /
• pp.252-258
• /
• 2013

In this paper, a thermally stable nickel silicide technology using the co-sputtering of nickel and titanium atoms capped with TiN layer is proposed for nano-scale metal oxide semiconductor field effect transistor (MOSFET) applications. The effects of the incorporation of titanium ingredient in the co-sputtered Ni layer are characterized as a function of Ti sputtering power. The difference between the one-step rapid thermal process (RTP) and two-step RTP for the silicidation process has also been studied. It is shown that a certain proportion of titanium incorporation with two-step RTP has the best thermal stability for this structure.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.78-85
• /
• 2019

The effect of various lithium sources such as LiCl, LiOH, and Li-metal on the microstructure and electrochemical properties of granulated $SiO_x$ powders were investigated. Various lithium sources were metallurgically added for a passive pre-lithiation of $SiO_x$ to improve its low initial coulombic efficiency. In spite of using the same amount of Li in various sources, as well as the same process conditions, different lithium silicates were obtained. Moreover, irreversible phases were formed without reduction of $SiO_x$, which might be from additional oxygen incorporation during the process. Accordingly, there were no noticeable electrochemical enhancements. Nevertheless, the $Li_4SiO_4$ phase changes the initial electrochemical reaction, and consequently the relationship between the microstructure and electrochemical properties of metallurgically pre-lithiated $SiO_x$ could provide a guideline for the optimization of the performance of lithium ion batteries.

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.258-263
• /
• 2002

We present a new toed phosphor, $Gd_{2-x-y}Li_xEu_yO_3$ with superior luminescent Properties compared to the commercially available red phosphor $Y_2O_3:Eu^{3+}$. The phosphor, with a diameter of about $2\mu\textrm{m}$, consists of the psedospherical particles in a regular array. The photoluminescence measurements as a function of the laser power and the Eu mole fraction were performed at zoom temperature The luminescence intensity linearly increases as both the laser power and the Eu mole fraction Increase. As for the dependence on cathodoluminescence, the incorporation of Eu and Li ions into $Gd_2O_3$ lattice brings about an increase in luminescent efficiency. The highest emission intensity for the phosphor occurs at the applied voltage of 500 V, its value is larger than that of $Y_2O_3:Eu^{3+}$ powder by 70%.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 추계학술발표논문집 1부
• /
• pp.110-114
• /
• 2010

Li-incorporated mesoporous $TiO_2$ materials with various pore-sized istributions were synthesized by using triblockcopolymers via a sol-gel process in a queous solution. The properties of the se materials were characterized by HR-TEM, XRD, and BET analysis. All particles have spherical morphology with a diameterrange of $1-3{\mu}m$. The mesoporous $TiO_2$ materials calcined at $400^{\circ}C$ and their specific surface area, average pore size and crystallite sizes were 210 $m^2g^{-1}$, 6.4 nm and 8.8 nm respectively. The Li-incorporated mesoporous $TiO_2$ were tested for $CO_2$ adsorption and its adsorption capacity is 90mg/g. The Li-incorporated mesoporous $TiO_2$ ar eobserved to be thermally stable, recyclable and greens or bent for $CO_2$ capture. The effect of bimetallic $ZrLiTiO_2$ is also studied for $CO_2$ adsorption.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제36회 동계학술대회 초록집
• /
• pp.221.2-221.2
• /
• 2009

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.447-453
• /
• 1999

Czochralski법으로 congruent한 조성(48.6 mol% $LiNbO_2$)과 $LiNbO_3$: Mg(4.5, 6.0, 10.0, 20.0mol%), $LiNbO_3$ : Mn(0.1 mol%), $LiNbO_3$: Fe(0.05 mol%), $LiNbO_3$ : (Mg(4.5)+Mn(0.1), Fe(0.05 mol%)), LiNbO3 : (Mg(20.0)+Mn(0.1), Fe(0.05 mol%))인 융액으로부터 결정을 c-축 방향으로 성장시켰다. 이 결정들은 상온에서의 XRD pattern과 상온~$1230^{\circ}C$의 온도영역과 100Hz~10MHz의 주파수영역에서의 유전상수, 상온에서의 UV_VIS, IR 스펙트럼, 결정내의 Mn2+, Fe3+ 이온에 대한 ESR 스펙트럼 등을 측정하였는데 XRD pattern과 상전이 온도, UV 흡수단, OH- 이온에 의한 스펙트럼, ESR 스펙트럼 등의 Mg첨가량 의존성으로부터 Mg가 첨가된 $LiNbO_3$ 결정의 결함구조에 대해서 논의하였다. congruent한 $LiNbO_3$결정과 Mg를 첨가한 $LiNbO_3$ 결정에서의 Mn2+ 이온은 Mg의 첨가량에 관계없이 Li+을 치환한다. 그러나 congruent한 $LiNbO_3$ 결정과 Mg를 첨가한 $LiNbO_3$ 결정에서의 Fe3+ 이온은 Mg가 4.5 mol% 첨가된 결정에서는 Li+ 자리를 Mg가 6.0 mol% 이상 첨가된 결정에서는 {{{{ { Nb}`_{Li } ^{5+ } }}}} 자리를 치환한다.

• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.327-340
• /
• 1996

고주파로의 이용한 Czocharalski 법으로 congruent$(R_{m}=R_{c}=0.945)$, stoichiometric$(R_{m}=1,\;R_{c}=0.957)$, Li-rich$(R_{m}=1.202,\;R_{c}=0.989)$, congruent한 조성에 $K_{2}O$를 6 wt% 첨가한 $LiNbO_{3}$ 등의 순수한 단결정들과 congruent한 조성에 Mg와 Mn을 불순물로 첨가한 $LiNbO_{3}:Mn(0.1\;mole%),\;LiNbO_{3}:Mg(4.5,\;6.0,\;10.0\;mole%),\;LiNbO_{3}:(Mg(4.5,\;6.0,\;10.0\;mole%)+Mn(0.1\;mole%))$ 단결정들을 결정의 c.축 방향으로 성장시켰다. 실온데서 UV 스펙트럼과 IR 스펙트럼을 측정한 결과 UV 흡수단과 $OH^{-}$ 흡수 스펙트럼은 [Li]/[Nb] 비에 따라 변화한다. 또 첨가한 Mg, Mn 불순물들의 영향을 받는데 UV 흡수단의 위치와 $OH^{-}$ 흡수 스펙트럼의 위치, 모양이 Mg의 첨가량에 크게 의존하며 이는 Mg의 첨가량에 따라 이 이온의 결정내 위치가 달라지기 때문이다. 순수한 단별정들에 대한 $OH^{-}$ 흡수 스펙트럼을 Gaussian 선모습 함수를 써서 3, 5 개의 성분 스펙트럼으로 분해한다. 이 결과를 설명하기 위한 $LiNbO_{3}$ 단결정내의 배내, 배외 결함 구조에 대한 논의로 부터 Li 빈자리 모델이 결함 구조를 설명하는데 적합하다는 결론을 내렸고 이들 불순물 이온의 결정내의 위치도 정한다. 또한 결함 구조에 대한 본 연구의 결론을 이용하여 최근의 다른 연구자들의 실험 결과도 설명한다.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3631-3640
• /
• 2022

Uranium mill tailing ponds (UMTPs) are risk source of debris flow and a critical source of environmental U and Rn pollution. The technology of microbial induced calcium carbonate precipitation (MICP) has been extensively studied on reinforcement of UMTs, while little attention has been paid to the effects of MICP on U & Rn release, especially when incorporation of metakaolin and bacillus subtilis (MBS). In this study, the reinforcement and U & Rn immobilization role of MBS -MICP solidification in different grouting cycle for uranium mill tailings (UMTs) was comprehensively investigated. The results showed that under the action of about 166.7 g/L metakaolin and ~50% bacillus subtilis, the solidification cycle of MICP was shortened by 50%, the solidified bodies became brittle, and the axial stress increased by up to 7.9%, and U immobilization rates and Rn exhalation rates decrease by 12.6% and 0.8%, respectively. Therefore, the incorporation of MBS can enhance the triaxial compressive strength and improve the immobilization capacity of U and Rn of the UMTs bodies solidified during MICP, due to the reduction of pore volume and surface area, the formation of more crystals general gypsum and gismondine, as well as the enhancing of coprecipitation and encapsulation capacity.

• 전기화학회지
• /
• 제18권4호
• /
• pp.143-149
• /
• 2015

Planetary ball mill과 고상반응법을 사용하여 실리케이트계 탄소 코팅된 $Li_2MnSiO_4$ 양극활물질 분말을 합성하였으며 충방전 특성을 조사하였다. 전기화학적 활성을 지니는 ${\beta}-Li_2MnSiO_4$ 상을 형성하기 위하여 하소 온도와 분위기를 조절하였으며 ${\beta}-Li_2MnSiO_4$ 단일상에 가까운 탄소 코팅된 $Li_2MnSiO_4$ 활물질 분말을 제조할 수 있었다. 합성된 분말은 100 nm 정도 크기의 1차 입자가 뭉쳐있는 2차 입자 형태를 보였다. $Li_2MnSiO_4$ 활물질에서 Li의 삽입/탈리가 가능하려면 탄소의 첨가가 필요하였으며, 4.8 wt%의 탄소가 코팅된 $Li_2MnSiO_4$ 활물질에서 초기용량 192 mAh/g를 얻을 수 있었다.

• Geomechanics and Engineering
• /
• 제23권3호
• /
• pp.207-215
• /
• 2020

This paper presents a kinematic limit analysis for passive earth pressure of rigid retaining structures considering the unsaturation of the backfill. Particular emphasis in the current work is focused on the effects of the spatial change in the degree of saturation on the passive earth pressure under different steady-infiltration/evaporation conditions. The incorporation of change of effective unit weight with degree of saturation is the main contribution of this study. The problem is formulated based on the log-spiral failure model rather than the linear wedge failure model, in which both the spatial variations of suction and soil effective unit weight are taken into account. Parametric studies, which cover a wide range of flow conditions, soil types and properties, wall batter, back slope angle as well as the interface friction angle, are performed to investigate the effects of these factors on the passive pressure and the corresponding shape of potential failure surfaces in the backfill. The results reveal that the flow conditions have significant effects on the suction and unit weight of the clayey backfill, and hence greatly impact the passive earth pressure of retaining structures. It is expected that present study could provide an insight into evaluation of the passive earth pressure of retaining structures with unsaturated backfills.