• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.1
• /
• pp.7-14
• /
• 2017

This study carried out a numerical analysis of the effects of hot waste water supply on the performance of a Type II absorption heat pump. There are two types of hot waste water supply, regular series flow and reverse series flow. Also it investigated the interaction between each type of flow and heat exchange solutions. As the effectiveness of heat exchange solutions increase, the steam generation and (COP) increase as well. If the effectiveness of a heat exchange solution is lower than 0.566, the steam generation rate of the reverse flow is lower than that of the regular series flow. A high effectiveness of heat exchange solution is therefore required to make a larger amount of steam in reverse series flow than with ordinary series flow. The COP difference between the two types of flow decreases with the increasing effectiveness of the heat exchange solution. Thus, a reverse flow type absorption heat pump can match the high steam generation rate and COP of the ordinary flow type when a highly effective heat exchange solution is applied.

• Journal of Animal Science and Technology
• /
• v.65 no.1
• /
• pp.96-112
• /
• 2023

Rye (Secale cereale L.) is a valuable annual forage crop in Korea but there is limited information about the impact of chemical and biological additives on fermentation characteristics of the crop. This experiment was conducted to investigate fermentation dynamics of wilted forage rye treated with the following six additives; control (no additive), sodium diacetate applied at 3 g/kg wilted forage weight (SDA3), 6 g/kg wilted forage weight (SDA6), inoculations (10⁶ CFU/g wilted forage) of Lactobacillus plantarum (LP), L. buchneri (LB), or LP+LB. The ensiled rye sampled at 1, 2, 3, 5, 10, 20, 30, and 45 days indicated that the acidification occurred fast within five days of storage than the rest of the storage period. The microbial inoculants decline the pH of ensiled forage, more rapidly than the control or SDA treated, which accompanied by the decrease of water-soluble carbohydrates and increase of lactic acid. Compared with the control silage, all treatments suppressed ammonia-nitrogen formation below to 35 g/kg DM throughout the sampling period. Suppression of total microbial counting occurred in SDA6, LP, and LP + LB. The lactic acid production rates were generally higher in microbial inoculation treatments. Acetic acid concentration was lowest in the LP-treated silage and highest in the SDA- and LB-treated silages. The in vitro dry matter (DM) digestibility and total digestible nutrients were the highest in the silage treated with SDA (6 g/kg) at day 45 of ensiling. Based on lower ammonia-nitrogen concentrations and higher feed value, ensiling forage rye treated with SDA at 6 g/kg is promising through enhanced silage quality.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.26 no.3
• /
• pp.146-155
• /
• 2023

Purpose: The starting time for probiotic supplementation in preterm infants after birth varies widely. This study aimed to investigate the optimal time for initiating probiotics to reduce adverse outcomes in preterm or very low birth weight (VLBW) infants. Methods: Medical records of preterm infants born at a gestational age (GA) of <32 weeks or VLBW infants in 2011-2020 were reviewed respectively. The infants who received Saccharomyces boulardii probiotics within 7 days of birth were grouped into an early introduction (EI) group, and those who received supplemented probiotics after 7 days of birth were part of the late introduction (LI) group. Clinical characteristics were compared between the two groups and analyzed statistically. Results: A total of 370 infants were included. The mean GA (29.1 weeks vs. 31.2 weeks, p<0.001) and birth weight (1,235.9 g vs. 1491.4 g, p<0.001) were lower in the LI group (n=223) than in the EI group. The multivariate analysis indicated that factors affecting the LI of probiotics were GA at birth (odds ratio [OR], 1.52; p<0.001) and the enteral nutrition start day (OR, 1.47; p<0.001). The late probiotic introduction was associated with a risk of late-onset sepsis (OR, 2.85; p=0.020), delayed full enteral nutrition (OR, 5.44; p<0.001), and extrauterine growth restriction (OR, 1.67; p=0.033) on multivariate analyses after adjusting for GA. Conclusion: Early supplementation of probiotics within a week after birth may reduce adverse outcomes among preterm or VLBW infants.

• Animal Bioscience
• /
• v.37 no.7
• /
• pp.1196-1203
• /
• 2024

Objective: A study was conducted to quantify the performance differences of the near-infrared spectroscopy (NIRS) calibration models developed with different degrees of hay sample preparations. Methods: A total of 227 imported alfalfa (Medicago sativa L.) and another 360 imported timothy (Phleum pratense L.) hay samples were used to develop calibration models for nutrient value parameters such as moisture, neutral detergent fiber, acid detergent fiber, crude protein, and in vitro dry matter digestibility. Spectral data of hay samples prepared by milling into 1-mm particle size or unground were separately regressed against the wet chemistry results of the abovementioned parameters. Results: The performance of the developed NIRS calibration models was evaluated based on R², standard error, and ratio percentage deviation (RPD). The models developed with ground hay were more robust and accurate than those with unground hay based on calibration model performance indexes such as R² (coefficient of determination), standard error, and RPD. Although the R² of calibration models was mainly greater than 0.90 across the feed value indexes, the R² of cross-validations was much lower. The R² of cross-validation varies depending on feed value indexes, which ranged from 0.61 to 0.81 in alfalfa, and from 0.62 to 0.95 in timothy. Estimation of feed values in imported hay can be achievable by the calibrated NIRS. However, the NIRS calibration models must be improved by including a broader range of imported hay samples in the modeling. Conclusion: Although the analysis accuracy of NIRS was substantially higher when calibration models were developed with ground samples, less sample preparation will be more advantageous for achieving rapid delivery of hay sample analysis results. Therefore, further research warrants investigating the level of sample preparations compromising analysis accuracy by NIRS.

• Economic and Environmental Geology
• /
• v.49 no.4
• /
• pp.281-290
• /
• 2016

Coastal areas, used as human utilization areas like leisure space, medical care, ports and power plants, etc., are regions that are continuously changing and interconnected with oceans and land. Regular monitoring of coastal changes is essential at key locations with such volatility. But the survey method of terrestial LiDAR(Light Detection and Ranging) system has much time consuming and many restrictions. For effective monitoring coastal changes, KIOST(Korea Institute of Ocean Science & Technology) has constructed a shipborne mobile LiDAR system. The shipborne mobile LiDAR system, installed in a research vessel, comprised a land based LiDAR(RIEGL LMS-420i), an IMU(MAGUS Inertial+), a RTKGNSS(LEICA GS15 GS25), and a fixed platform. The shipborne mobile LiDAR system is much more effective than a land based LiDAR system in the measuring of fore shore areas without shadow zone. Because the vessel with the shipborne mobile LiDAR system is continuously moved along the shoreline, it is possible to efficiently survey a large area in a relatively short time. We conducted test measurements in the Anmok-Songjung beach around the Gangneung port. Effective monitoring of the changes using the constructed shipborne mobile LiDAR system for seriously eroded coastal areas will be able to contribute to coastal erosion management and response.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.4
• /
• pp.222-228
• /
• 2014

Ni-rich system $Li[Ni_{1-x-y}Co_xMn_y]O_2$ of lithium secondary battery cathode material keep a high discharge capacity. However, by the Ni content increases, there is a problem that the electrochemical properties and stability of the structure are reduced. In order to solve these problems, research for positive ion doping is performed. The one of the cathode material, barium-doped $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01), was synthesized by the precursor, $Ni_{0.6}Co_{0.1}Mn_{0.3}(OH)_2$, from the co-precipitation method. The barium doped materials have studied the structural and electrochemical properties. The analysis of structural properties, results of X-ray diffraction analysis, and those results confirmed the change of the lattice from the binding energy in the structure by barium doping. Increased stability of the layered structure was observed by $I_{(006)}+I_{(102)}/I_{(101)}$(R-factor) ratio decrease. we expected that the electrochemical characteristics are improved. 23 mAh/g discharge capacity of barium-doped $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01) electrode is higher than discharge capacity of $Li[Ni_{0.6}Co_{0.1}Mn_{0.3}]O_2$ due to decrease overvoltage. And, through the structural stability was confirmed that improved the cycle characteristics. We caused a reduction in charge transfer resistance between the electrolyte and the electrode was confirmed that the C-rate characteristics are improved.

• Resources Recycling
• /
• v.28 no.5
• /
• pp.60-67
• /
• 2019

A valuable metal recovery from waste resources such as spent rechargeable secondary batteries is of critical issues because of a sharp increase in the amount of waste resources. In this context, it is necessary to research not only recycling waste lithium-ion batteries (LIBs), but also reusing valuable metals (e.g., Li, Co, Ni, Mn etc.) recovered from waste LIBs. In particular, the lithium hydroxide ($LiOH{\cdot}xH_2O$), which is of precursors that can be prepared by the recovery of Li in waste LIBs, can be reused as a catalyst, a carbon dioxide absorbent, and again as a precursor for cathode materials of LIB. However, most studies of recycling the waste LIBs have been focused on the preparation of lithium carbonate with a recovery of Li. Herein, we show the preparation of high purity lithium hydroxide powder along with the precipitation process, and the systematic study to find an optimum condition is also carried out. The lithium carbonate, which is recovered from waste LIBs, was used as starting materials for synthesis of lithium hydroxide. The optimum precipitation conditions for the preparation of LiOH were found as follows: based on stirring, reaction temperature $90^{\circ}C$, reaction time 3 hr, precursor ratio 1:1. To synthesize uniform and high purity lithium hydroxide, 2-step precipitation process was additionally performed, and consequently, high purity $LiOH{\cdot}xH_2O$ powder was obtained.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.319-329
• /
• 2004

The electrorefining experiments with an anode composed of U, Y, Gd, Nd and Ce (or U, Gd, Dy and Ce) were carried out in the KC1-LiCl eutectic melt at $500^{\circ}C$, Uranium was the major component in the cathode deposits at the high initial uranium concentration, and the separation factors of the uranium with respect to the rare earths (REs) were calculated according to the applied voltage and the uranium concentration in the molten salt. The current efficiency was inversely in proportion to the applied voltage in the range of 1.0 V to 1, 9 V (vs. STS304L). The dependency of the applied voltage on the current efficiency as well as the deposition rate was discussed in terms of the microstructural feature and crystal structure of the deposit.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.185-188
• /
• 2007

본 논문은 하이브리드용 자동차의 리튬 이온 전지의 사이클 라이프에 따른 용량의 감소를 예측하고 잔량을 예측하기 위한 지능형 스마트 모듈의 설계를 제안한다. 리튬 이온 전지는 충 방전 횟수에 따라 전하를 담을 수 있는 용량이 감소하고, 방전 전압이 비선형이므로 정확한 잔량 예측이 어렵다. 따라서, 지능형 스마트 모듈은 전압과 전류, 온도의 측정을 위한 데이터 수집 장치를 제작하고 퍼지 로직을 이용한 잔량 측정 알고리즘을 통해 정확도가 높은 리튬 이온 전지의 잔량을 예측하고, 충 방전 실험 값과 퍼지 로직을 이용한 결과 값의 비교를 통해 그 효용성을 보인다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1206-1209
• /
• 2007

Both PM-OLEDs and AM-OLEDs are now in production. However, manufacturers are still concerned about life-time, voltage drift, operating voltage and efficiency in order to develop larger displays. Most material suppliers seem to be focussing on emitters and the benefits of introducing suitable charge transporters have been largely unexplored. OLED-T has developed a novel organic electron injector (Trade Name: EI-101) which evaporates at a very low temperature of $300^{\circ}C$ as opposed to the conventional LiF which requires $580^{\circ}C$. EI-101 has been found to increase the lifetime by up to 12%, reduce the voltage drift by up to 61% and increase the efficiency by up to 15%. The material can be handled in air and in situ Q-mass spectroscopy on extended thermal evaporation has confirmed its high stability for use in mass production.