• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1666-1668
• /
• 2004

By wireless transmission data, there is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error check algorithm in order to decrease the data's distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error check algorithm for error check of transmission data. This study is also that investigation and search for error check algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro process in the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which can get permission to use by Frequency Law made by Korean government

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.39-44
• /
• 2005

In HANARO, a multi-purpose research reactor of 30 MWth, the emergency water supply system consists essentially of an emergency water storage tank located in the level of about thirteen meter (13 m) above the reactor core, a three inch ('3\%') diameter water injection pipe line including injection valves from the tank to the reactor cooling inlet pipe and a test loop to do periodic system performance test. When the water level of the reactor pool comes down to the extremely low due to a loss of reactor pool water accident the emergency water stored in the tank should be fed to the core by the gravity force and at that time the design flow rate is eleven point four kilogram per second (11.4 kg/s). But it is impossible periodically to measure the injection flow rate under the emergency condition because the normal water level should be maintained during the reactor operation. This paper describes a flow network analysis to simulate the flow rate under the emergency condition. As results, it was confirmed through the analysis results that the calculated flow rate agrees with the design requirement under the emergency condition.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.194-202
• /
• 2009

The paper deals with the countermeasure against structure-borne noise source and noise reduction of drainage pipes. Recently, the problem the problem of the toilet drain noise of an apartment house has been become the center of public interest and a target of public grievance. Generally, the drain noise of a toilet in the apartment house has a pink noise characteristics below 2 kHz level, and therefore, the structure-borne noise has a great effect on the entire drain noise. In order to measure the transmission loss for various kinds of pipes such as PVC pipes, cast-iron pipes and newly developed AS pipes, experimental setup containing speakers as a sound source was designed and manufactured. The second-stories measurement room with a small size anechoic chamber was constructed and the noise level for different kinds of drainage pipes was measured by the sound level meter. Through the experimental research in the study, noise reduction capacity for various kinds of drainage pipes and countermeasures against structure-borne noise source are demonstrated.

• Journal of Korean Critical Care Nursing
• /
• v.8 no.1
• /
• pp.41-49
• /
• 2015

Purpose: The purpose of this study was to measure the noise levels in intensive care units (ICUs) and to analyze the causes of the noise and patient perceptions of the noise. Methods: Noise levels were recorded in adult ICUs for 24 h over a week from the patients' bedside with a sound level meter. Noise sources were categorized into three groups: medical equipment, health care providers, and the environment. Noises from the environment were recorded in an empty ICUs side room. Perceptions of the noise of 125 patients admitted to the ICUs were recorded using a questionnaire. Results: The mean level of noise in the ICUs was 58.5 dBA (range: 34.2-80.2 dBA). The causes of noise higher than 70 dBA were nebulizers and infusion/syringe pumps among medical equipment, and drawer slamming, phone ringing, and stripping packages of medical fluids among environmental noises. According to the questionnaire, 64.0% of the patients responded that the ICUs were noisy and that they suffered from sleep disturbance because of the noise. Conclusion: Noise is considerably high in ICUs and is an annoying factor for the patients. Most noise sources are adjustable, and we should try to reduce noise whenever possible to make the ICUs environment more pleasant.

• International Journal of Aeronautical and Space Sciences
• /
• v.5 no.1
• /
• pp.46-56
• /
• 2004

The verification and improvement of the measurement uncertainty have beenperformed in the altitude test facility for small gas turbine engines, which was built atthe Korea Aerospace Research Institute (KARI) in October 1999. This test is performedwith a single spool turbojet engine at several flight conditions. This paper discussesthe evaluation and validation process for the measurement uncertainty improvements usedin the altitude test facility. The evaluation process, defined as tests before the facilitymodification, shows that the major contnbutors to the measurement uncertainty are theflow meter discharge coefficient, the inlet static and total pressures, the cell pressureand the fuel flow rate. The measurement uncertainty is focused on the primary parametersof the engine performance such as airflow rate, thrust and specific fuel consumption (SFC).The validation process, defined as tests after the facility modification, shows that themeasurement uncertainty, in seal level condition, is tmproved to the acceptable level throughthe facility modification. In altitude test conditions, the measurement uncertainties arenot improved as much as the uncertainty in sea level condition.

• Environmental and Resource Economics Review
• /
• v.10 no.2
• /
• pp.217-234
• /
• 2001

The use of district heating is expanding very rapidly in Korea. High population densities and the relatively cold winters make district heating an economically attractive option. About 8 percent of Korean houses are already using district heating and the government is seeking to aggressively expand this number. It has set a target of 15 percent of the residential heat market to be met by district heating in the year 2001. The main purpose of this paper is to analyze the consumption behavior of households using district heating. By pooling time-series and cross-sectional data for 12 apartment complexes in Seoul area, a single demand function is estimated and used to forecast the amounts of heat demanded by the individual households. The results shows that the level of consumption varies among households, depending on the non-economic factors such as the installation of individual metering equipment and the volume of apartment building. When individual metering equipment is installed, the level of annual heat consumption per household declines, on average, about 22.1 Mcal per square meters, which is equivalent to 834 won per square meter in terms of heating expenditures. In case that the apartment building was built in more than 6 stories, annual consumption level reduces additionally about 17.3 Mcal per square meters and, thus, save the expenditures by 649 Won per square meters, compared to the opposite case.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.385-394
• /
• 2002

Satellite laser ranging is a technique for precisely measuring the range between a laser station and a satellite that is equipped with retro-reflectors. SLR technique was first used for Beacon-B satellite in 1964 with the ranging accuracy of meter level. Now the single shot have centimeter level accuracy and the normal point have mm level in ranging. In this study we developed the algorithm for precise orbit determination using SLR data and performed the orbit determination of GPS-36 satellite using the algorithm. RMS of the estimated orbit was 74cm when compared with IGS precise orbit. It is known that RMS of SLR measurement residual is below 55mm. But we were able to achieve 44mm RMS of residual throughout this study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.83-90
• /
• 2020

A commercial flow measurement radar sensor estimates a quantity of flowed water using surface flow rate. In this way, the amount of water flowing per unit time cannot be measured accurately because of using an estimation result and it can't response environmental changes. For more accurate flow measurements we need width of waterway, water level and distance that water moved per unit time. Commonly two sensors are used to measure water level and flow rate. In this paper, we propose a method to simultaneously measure the water level and surface flow velocity using a single FMCW radar sensor and design the transmission waveform. In order to verify the waveform design, received signal is modelled based on transmission waveform. In addition, we consider phenomenons and problems that may occur in signal processing.

• Korean journal of food and cookery science
• /
• v.1 no.1
• /
• pp.65-73
• /
• 1985

In this study, we tried to compare and determine wat the effects will be to the sensory characteristics and textures of a meat balls when the proportion of the textu-rized soy protein (TSP) varies from 0, 10, 20, 30, and 40％. Evaluation was conducted through sensory evaluation and objective evaluation. The results are as follows: 1. As the level of 40％ TSP increased the meat ball maintained a better appearance. 2. Color, beef flavor, tenderness, juiciness and acceptability shelved the tendency to decrease as TSP proportion increased. (1) No significant change to the outside color revealed to the level of 20％. How-ever, inside color showed a significant change after the level exceeded 20％. (2) Soy flavor tended to increased and beef flavor tended to decrease as the TSP proportion increased. However up to the level of 30％ one could not taste the flavor of soy. (3) Tenderness tended to decrease as the TSP proportion increased however difference was not significant. (4) Juiciness decreased as TSP proportion increased. (5) Acceptability tended to decrease as the TSP proportion increased but to a 40％ addition, the level of TSP did not have much effect on the sensory characteristics as long as sufficient seasonings were added. 3. Instron measurement incidated that springiness, cohesiveness and shear force tended to dcrease as the TSP proportion increased but hardness increased and chewi-ness was the highest at 20％ TSP level. 4. Color and difference meter indicated that the figure L and b tended to increase and AE decreased as the TSP proportion increased. 5. Cooking retention tended to increase as the TSP proportion increased. From thiss tudy, we can conclude that the level of up to 40％ of TSP in making meat ball did not affect the preference.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.232-247
• /
• 1987

Three rice varietis, Dongjinbyeo, Daecheongbyeo and Chucheongbyeo, which are leading cultivars in the Chungnam area, were planted to determine their effects of mixture on the plant characteristics and the blast occurrence. The summary obtained is as follows; 1. The heading dates of each cultivars were not affected by the mixing culture. Only a day was delayed in heading date of Chucheongbyeo under commonly standard fertilizer level. 2. The effects of cultivar mixture on the plant height was high when low level of fertilizer were applied. Of the cultivar mixture, the mixing of Dongjinbyeo and Daecheongbyeo shoed 5.1% of plant height increase. The effects of mixture on the tillering number were apparent only under the standard fertilizer level. The mixture of Dongjinbyeo and Chucheongbyeo was effective in increasing the tillering number up to 5.7% over mean tillering number of each cultivars. 3. The stem height tended to increase as the fertilizer level increased and the effects of cultivar mixture on the stem height was high. The stem height of mixture of Dongjinbyeo and Daecheongbyeo was highest compared with other mixture cropping. On the contrary, the panicle length was shortened as the fertilizer level decreased and cultivars were mixed. Among the cultivar mixtures, the mixture of Dongjinbyeo and Daecheongbyeo showed the most effectives of increasing the panicle length. 4. The total dry weight of mixed and pure cultivars were compared. The mixture of two cultivars was effective in increasing the dry weight of rice upto 3.5% over the average of dry weight of each cultivars. When three cultivars were mixed, there were 8.5% of dry weight increase over not mixed cultivars. The effects of mixture on the dry weight were more apparent under standard fertilizer level. 5. The rates of Neck and Node and Branch Blast occurrence were reduced when cultivars were mixed, and their reduction rates were 11.7% and 14.0%, respectively. The occurrence of Blasts was also decreased under the lowest fertilizer level than the standard fertilizer level. The least Blast occurrence was obtained when Dongjinbyeo and Daecheongbyeo were mixed cropped. 6. Significantly high number of spikelets of per square meter was observed when Chucheongbyeo and Dongjinbyeo were mixed. However, the spikelets of panicle were the lowest when Chucheongbyeo and Dongjinbyeo were mixed. The number of panicles per square meter was increased as the fertilizer levels increased, while the number of spikelets per panicle increased as the fertilizer level decreased. 7. The effects of mixture on the maturing were apparent regardless of the fertilizer level. The 1000 grain weight was higher when lower level of fertilizer was applied. The effects of cultivar mixture on the 1000 grain weight were more apparent in the plots of Chucheongbyeo and Dongjinbyeo mixture and three cultivar mixture. 8. The grain yield increased when cultivars mixed. The increment under mixing cropping was 4.6% over mono cropping. The effects of cultivar mixture on the yield increase were more apparent under lower levels of fertilizer application. The highest yield increase was obtained when Chucheongbyeo and Daecheongbyeo were mixed, and the rate of yield increase was 6.8% over mono-cropping. 9. The grain yield was highly correlated with number of panicles per square meter and dry weight. There was not any significant relationships found among grain yield, spikelets of panicle and ripening percentage.