• Architectural research
• /
• v.2 no.1
• /
• pp.55-60
• /
• 2000

Recently, there is a great demand for precast reinforced concrete (RC) construction methods on the purpose of simplicity in construction. Nishimatsu Construction Company has developed a construction method with precast reinforced concrete members in medium-rise building. In this construction method, how to joint precast members, especially the anchorage of the main bar of beam, is important problem. In this study, the structural performance of exterior joints with precast members was investigated. The parameters of the test specimens are anchorage type of the main bar of beam (U-shape anchorage or anchorage plate) and the ratio of the column axial force to the column strength. Specimens J-3 and J-4 used U-shape anchorage and the ratio of the column axial force of specimen J-4 was higher. On the other hand, specimens J-5 and J-6 used anchorage plate, and the anchorage lengths are 15d and 18d, respectively. Experimental results are summarized as follows; 1) For the joints with beam flexural failure mode, it was found that the maximum strength of specimen with anchorage plate is equal to or larger than that of specimen with conventional U-shaped anchorage if the anchorage length of more than 15d would be ensured, 2) Each specimen shows stable hysteretic curves and there were no notable effects on the hysteretic characteristics and the maximum strength caused by the anchorage method of beam main bar and the difference of column axial stress level.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.47-52
• /
• 1999

The influence of propeller revolution on measurement of fluctuating pressure is almost minimized in the KRISO cavitation tunnel and the measurement accuracy of fluctuating pressure acting on a flat plate due to a cavitating propeller is improved. The measurement data for Sydney Excess propeller is compared with the measurement results of other research institutes loading to the conclusion that KRISO data is so stable and reasonable. The fluctuating pressure data measured on a model ship and the prototype ship is compared with the data measured on the flat plate. The solid boundary factor, derived from a calculation based on a lifting surface theory, is applied to predict full scale pressure level from the experimental data on the flat plate, showing quite reasonable agreement with full scale data.

• Journal of Radiation Protection and Research
• /
• v.29 no.1
• /
• pp.25-31
• /
• 2004

Results of EGS4 based calculations to study the spatial resolution of gas detectors are described. The calculations include radial distribution of electrons generated by photons of various energies penetrating into variable thickness of Ar and Xe gas layers. Given a desired spatial resolution, the maximum allowed thickness of gas layer for each energy level is determined. In order to obtain 0.1mm spatial resolution, the maximum thickness for the Ar gas is found to be 2mm for photon energies below 14keV while the optimum energy of photons for Xe gas with the same thickness is about 45keV. The results of calculations performed to compare the number of electrons generated by CsI coated micro-channel plate and the number of electrons generated by the Ar and Xe gas layers are described. The results show that the number of electrons generated by the gases is about 10 times higher than the one generated by CsI coated micro-channel plate. A few sample gray scale images generated by these calculations are included.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.4
• /
• pp.153-157
• /
• 2016

In case of metal insulation, which is produced by stacking stainless steel sheets and air layers in a multi-stack manner at a specific thickness, insulation performance will be evaluated based on thermal transmittance rather than the intrinsic physical properties of each material such as thermal conductivity. However, there is no standard for measuring thermal transmittance targeted for non-homogeneous insulation which is used in relatively high temperature conditions such as a power station. In this study, the thermal conductivity of homogeneous insulation acquired by the standardized guard hot plate method and the thermal conductivity of homogeneous insulation measured by the newly developed performance tester were compared to verify the confidence level of the tester. As a result, thermal conductivity acquired by the newly developed thermal transmittance tester was about 6% higher than the thermal conductivity measured by the existing guard hot plate method under the anticipated service temperature conditions.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.11
• /
• pp.1222-1230
• /
• 2009

A theoretical model was developed to compute the effect of a bubble layer in reducing the radiation noise generated by a force applied on an infinite flat plate considering the noise of multi-bubbles. Using the model, the effectiveness of a bubble layer in reducing the structure-borne noise of the plate was evaluated to consider various parameters such as the source noise levels, the thickness of bubble layers, the volume fractions and the frequency characteristics of bubbly fluids. Considering the noise of multi-bubbles, the actual reduction effect of radiation noise using a bubble layer was expected in cases of high source levels, high volume fractions of bubbles and large thickness of the bubble layer above the resonance frequency of the bubble layer. Accordingly, it is recommended that the thickness of a bubble layer, the source noise level and the characteristics of bubbly fluids should be optimized cautiously to maximize noise reduction effects.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.269-278
• /
• 1999

When a variety of repeated loads are given, most steel structures failed in much lower level of loads than static failure loads. In addition, bridge always includes the internal defects or discontinuities. from these, fatigue cracks initiates and can lead to sudden failure. Thus, in this study, tensile specimens by the cover plate shapes were used as the test specimens. The fatigue test was performed by constant amplitude fatigue loading and beach mark. From the results of this study, each specimen's fatigue section was observed. in addition, stress intensity factor at crack tip was calculated by using the Green's function which applied to discontinuous section where causing stress concentration. Therefore, the fatigue life of structural detail was investigated by adopting the theories of fracture mechanics. each specimen's crack shape is a semi-elliptical surface crack or center crack sheet, stress gradient correction factor, Fg is the most subjective of all stress intensity correction factors and fatigue life should be predicted by previous proposed function and finite element analysis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.7
• /
• pp.1054-1058
• /
• 2006

The purpose of this study was to use pig blood plasma transglutaminase (TGase) combined with thrombin and fibrinogen as a binder, which was applied to restructured meat, and to investigate its effect on the restructured meat quality. Pig meat was obtained 10 h post mortem from a traditional market was ground using a 10 mm aperture plate. A binder admixture was added (TGase:thrombin:fibrinogen mixed as 0.5:1:20 (v/v/v) to which was added 12% of its volume of 0.25 M calcium chloride) at 0, 5, 10, 15 and 20% of meat weight. Measurements included cooking loss, shrinkage rate, shear value, total plate count, pH value, TBA value, color difference, tension strength and sensory evaluation. The results showed that ground meat containing 20% w/w of binder admixture had higher cooking loss, shrinkage rate and shear value (p<0.05). Addition of different percentages of binder admixture did not affect total plate count, pH value, TBA value, and sensory evaluation of restructured meat (p>0.05). Tension strength was increased with increased level of binder admixture. Addition up to 15% binder admixture to restructured meat showed better scores of sensory texture, flavor and total acceptability (p<0.05).

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.146-154
• /
• 2005

Recently, the high-speed and intelligence technology of machine tools are developed for the high efficiency of productivity Under the operating condition from the high-speed of machine tools, the various failure modes can occur in core units of manufacturing system. Therefore it is for the reliability concept of machine tool to be required in a design level. And the above-stated technology must be accommodated in the feeding and spindle subsystem, etc those are the core units of machine tools. In this study, we are developed the test-bed of sliding cover (C-plate) in order to evaluating reliability and estimating failure modes of feeding subsystem under operating conditions. The reliability experiment using the developed test-bed and the additional structural analysis executed on single and double structure. We found out the weak parts of sliding cover and were able to predict a life cycle from the experiment results. In this study, we propose the new C-plate model with double link structure to apply the high-speed machine tool in the fundamental guideline.

• Korean Journal of Veterinary Service
• /
• v.20 no.4
• /
• pp.339-348
• /
• 1997

The purpose of the survey were determined the residual antibiotics and tetracyclines in beef(n=1,364), pork(n=2,817) and chickens(n=1,921) by the EEC 4-plate method, Charm IIand HPLC. The results were summarized as follows ; 1. The recovery rates in spiked samples were 98.8-107.2% for oxytetracycline(OTC), 33.2-48.6% for tetracycline(TC) and 64.1-72.3% for chlortetracycline(CTC) at 0.05-0.1ppm by HPLC using MSPD. 2. Residues of antibiotic were detected from 10 beef(0.75%) and 36 pork(1.31%) by EEC 4-plate method. In case of chickens were not detected. 3. Twenty-eight from 46 positive samples by the EEC 4-plate method were classified as TCs(60.9 %) by Charm II and TC of 12 samples were detected by HPLC. 4. Ten samples were detected levels of OTC ranging from 0.035 to 0.635 ppm and 3 samples were levels of CTC ranging from 0.066 to 0.150 ppm. OTC and CTC levels in 3 beef and 4 pork samples were exceeded the current tolerance level of 0.1 ppm.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.5
• /
• pp.410-415
• /
• 2012

An experimental study is carried out to investigate the near-wake characteristics of a NACA 0018 foil with a flat plate. Two-frame grey-level cross correlation PIV method is used to measure the local flow characteristic around a pitch damping foil to control the vertical motion of high speed crafts in a circulating water channel. The analysis also includes angles of attack 10 and 20 degrees respectively. Reynolds number $Re{\fallingdotseq}3.5{\times}10^4$ based on the chord length(C=100mm) of NACA0018 has been applied during the whole experiments. The distance between the foil and the flat plate is D/C=0.5, 1.0 and 1.5 respectively. The channel effect according as the distance between the foil and the flat plate has a close relation with the velocity distributions around the foil. In the wake of 20-degree of attack, the complex turbulent flow and a thick boundary layer are formed due to the processes of vortex generation and dissipation.