• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.2
• /
• pp.150-164
• /
• 2000

This study was conducted at occupational health laboratories in Seoul and Gyunggi district area from December, 1999 to January, 2000. The main purpose of this study was to survey the actual condition of safety and health by questionnaire and checklist and to assess the performance of fume hoods and the airborne exposures to chemicals in the laboratories. The chemicals in the cabinet were not classified by hazardous properties and the compressed gases were not stored safely. The prevalences of laboratories having first aid kits, fire extinguishers, and safety showers were found to be 18%, 55%, and 9%, respectively. Most laboratory workers were not educated for safety and health. Also, there was no performance evaluation for hazards and risks. The fume hoods in laboratories had not been annually inspected by checklist and the face velocity had been checked more than one time in the previous year for only 18% of them. Five percent of fume hoods had the face velocity more than 4.0 m/sec and 17% had no capture performance. Detected organic solvents were methylenechloride, acetone, ethylbenzene, isopropanol, xylene, methylisobutylketone, trichloroethylene, and toluene. The concentrations of organic solvents were much less than the occupational exposure limits proposed by the Ministry of Labor in Korea. This study showed that the actual condition of safety and health was not appropriate for laboratory workers. It is recommended that laboratory workers should be educated for the treatment and storage of hazardous chemicals and compressed gases to improve the working environment of the occupational safety and health laboratories.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.2
• /
• pp.102-112
• /
• 2009

The greatest concern of vapor/gas respirators is when to exchange chemical cartridges, but it is very difficult to estimate the breakthrough time of them in the workplace spot due to so many factors influencing on breakthrough. There needs to study on estimating cartridge exchange period available practically in the spot, even if it is not precise. In the previous study, authors suggested the method on estimating service-life of chemical cartridges using cartridges discarded after use. This followed study was to estimate exchange period for chemical cartridges using comparison of concentrations between Korean Occupational Exposure Limits (KOELs) and odor thresholds of chemicals. Chemicals were divided into four groups, I, II, III and IV groups. Group I chemicals are relatively safe if cartridges are just or slightly delayed exchanged when smelling since odor thresholds were less than 0.5 times KOELs. Odor threshold of Group II chemicals are 0.5~2.0 times KOELs and potentially hazardous if cartridges are exchanged when smelling. Those chemicals should be conducted program on estimating service-life of cartridges, which was just previously published (J Kor Soc Occup Environ Hyg 2008;18(3) 204-215). Group III chemicals (odor thresholds are more than 2.0 times KOELs) and Group IV chemicals (odorless or no data for smelling) must be performed the above mentioned program before cartridges. Even if this method on cartridge exchange using odor threshold is practically widely used in the workplace spot in the present, program on estimating service-life of cartridges is recommended for all chemicals to reduce potentially hazards.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.3
• /
• pp.144-161
• /
• 2007

The studied Nangsan area is widely covered by the Jurassic biotite granodiorite, which is mainly light grey in color and medium-grained in texture. Results of the regional fracture pattern analysis for the granodiorite body are as follows. Strike directions of fractures show three dominant sets in terms of frequency order. The sets are in an order of a (1) $N80^{\circ}{\sim}90^{\circ}E$ (1st-order)>(2) $N70^{\circ}{\sim}80^{\circ}E$ (2nd-order)>(3) $NS{\sim}N10^{\circ}E$ (3rd-order). Spacings of the fractures are mostly predominant in less than 200 cm. Therefore, the granodiorite of the area has more potential for non-dimensional stones than dimension ones. And orientations of vertical quarrying planes can be also divided into two groups in terms of frequency $N14^{\circ}W{\sim}N16^{\circ}E$ (1st-order) and (2) $N78^{\circ}E{\sim}N88^{\circ}E$ (2nd-order). The orientations of the two groups are more or less different from those of the regional fracture patterns. These can be mainly attributed to the preferred orientations of microcrack developed in the quarries. Of physical properties, specific gravity, absorption ratio, porosity, compressive strength, tensile strength and abrasive hardness are 2.65, 0.28%, 0.73%, $1,628kg/cm^2,\;100kg/cm^2$ and 31, respectively. Contrary to the porosity, both granites of the Nangsan and Sogrisan areas show almost similar values of the abrasive hardness. These can be explained by the differences of Qz+Af modes, which can be regarded as an index for abrasive resistance. Meanwhile, it is anticipated that comprehensive understanding of the orientations of vertical quarrying planes and characteristics of various physical properties will be utilized as an important information for stone resources.

• Economic and Environmental Geology
• /
• v.41 no.4
• /
• pp.405-425
• /
• 2008

In order to investigate the amounts of trace elements flowing into reservoir, and to elucidate the relationship between trace element mobility and fraction size, the stream water and sediment samples were collected from thirty-two sites of the 3rd or 4th order stream within watershed surrounding the Juam reservoir. Chemical analyses of trace elements (As, Cd, Cr, Cu, Ni, Pb and Zn) for all samples were completed, and additionally cationi and anion for stream water samples. Considering the distribution of rocks and contamination sources in watershed, the eight stream sediments were selected from typical sites representing study areas, and we determined the concentrations of trace elements according to size fractions ($2\;mm{\sim}200\;{\mu}m$, $200{\sim}100\;{\mu}m$, $100{\sim}50\;{\mu}m$, $50{\sim}20\;{\mu}m$ and < $20\;{\mu}m$). The correlation relationships between concentrations and size fractions of stream sediments were important to identify the hydro-geochemical behavior of trace elements that flow into Juam reservoir. Stream waters showed four water types (Ca-Mg-$HCO_3$, Ca-Na-$HCO_3$-Cl, Ca-Na-$HCO_3-SO_4$, Ca-Na-$HCO_3$) depending on pollution sources such as coal mine, metal mine, farm-land and dwellings. Concentrations of trace elements increased clearly with the decrease in size fractions of stream sediments. Concentrations of Cu, Pb and Zn increased dramatically in silt size (< $20\;{\mu}m$) fraction, while As had high concentrations in sand size ($2\;mm{\sim}100\;{\mu}m$) fraction in downstream sediments of metal mines. These indicate that Cu, Zn, and Pb moved into Juam reservoir easily in the adsorbed form on silt size grain in sediments, and As was transported as As-bearing mineral facies, resulting in its less chance to reach into Juam reservoir.

• Korean Journal of Ecology and Environment
• /
• v.34 no.1 s.93
• /
• pp.45-53
• /
• 2001

Transport of cyanobacterial toxins (microcystin-LR, -RR, -YR) were assessed from a eutrophic lake, Lake Suwa, through the outflowing river, the Tenryu River, and its irrigation channel branch. Temporal variation of phytoplankton species composition in the river coincided with those of the lake; Microcystis ichthyoblabe dominated from June to July, and M. viridis dominated from August to September. When cyanobacterial bloom occurred, microcystins were continuously detected at the concentration of $0.3{\sim}3.2\;{\mu}g/l$ even at 32 km downstream. The change of the content of three microcystin variants were related both with the total cell density of Microcystis and with the change of Microcystis species composition. When Microcystis ichthyoblabe dominated during July, only microcystin-RR (MC-RR) and -LR (MC-LR) were detected, while when Microcystis viridis dominated between August and October, microcystin-RR,-YR (MC -YR) and -LR were detected. Along 29 km flowing distance (flow time 11 hours) between site 2 and site 5 in the Tenryu River, cyanobacterial density and microcystin concentration were reduced by 73% and 72%, respectively, which is mostly contributed by the dilution effect of tributary waters (61% and 57%, respectively) . In the artificial irrigation channel microcystins and cyanobacterial cells were decreased less than in the natural river. The results indicate that cyanobacterial toxins can be transported far downstream without much removal and give hazards to water usage in downstream of eutrophic lakes with cyanobacterial blooms.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.1-23
• /
• 1998

Work-related Low Back Pain(LBP) is one of tile most important Issues in the field of industrial safety and health. Particularly, manual lifting is known as a major cause of work-related LBP and impairment. Total number of 163 manual lifting tasks in motor assembly processes were investigated. The 1981 and the 1994 equations developed by National Institute for Occupational Safety and Health(NIOSH) were applied to evaluate potential hazards of lifting-related LBP. Comparisons between the 19R I and 1994 NIOSH criteria were made. The relationships between the NIOSH criteria and lifting-related LBP were also analyzed. The results of this study are as follows: 1. The values of Action Limit(AL) by the NIOSH 1981 lifting equation. Recommended Weight Limit(RWL) by the 1994 equation and the weight of the load handled at each manual lifting task were shown log-normal distributions. 2. LI'(the weight of tile load/AL) and LI(the weight of the load/RWL) were calculated estimate the physical stress imposed by each individual lifting task. As a result. 76.7% of the total LI' value exceeded 1 and 12.9% exceeded 3, and 84.7% of the total LI values exceeded 1 and 20.9% exceeded 3. 3. Bus 2 Department showed the highest rate of LI'>1 and LI>1 and Bus 1 Department showed the highest rate of LI'>3 and LI>3 4. In general, the RWLs by the 1994 equation were found lower than the ALs by the 1981 equation. It is assumed to he resulted from the fact that the 1994 equation includes methods evaluating asymmetrical lifting tasks and lifts of objects with less then optimal hand-container couplings, and also covers a larger range of work durations and lifting frequencies than the 1981 equation. 5. Significant correlations were found between LI' and incidence of LBP (R=0.734, p<0.05). LI and incidence of LBP(R=0.671. p<0.10) and load-weights and incidence of LBP(R=0.797, p<0.05). 6. Control measures are required to achieve the value of LI less than 1 for some tasks having high LI values. Engineering control is highly recommended for some tasks having the value of LI above 3.

• Journal of Food Hygiene and Safety
• /
• v.24 no.2
• /
• pp.111-123
• /
• 2009

We investigated the consumption inclinations of consumers for environmentally-friendly agricultural products (EFAP) for better production and distribution of EFAP. Consumer inclinations in large supermarkets from April 7th to 30th, 2008 were surveyed. Data were analyzed using the SPSSWIN 12.0 program. Results showed that 90.4% of consumers recognized EFAP and 76.4% of those who recognized the products had actually bought the products. Members of the "have purchased group" bought EFAP once a week because they believed these products were safe from hazards, such as pesticide. The amount spent on EFAP was less than 20% of the total food budget and the major consumed items were green vegetables and fruits. The sale location was mainly large supermarkets and agricultural cooperation outlets. Although many people were satisfied with EFAP from the viewpoint of nutritional and sensory qualities and safety compared with general agricultural products, they were notsatisfied with the price. Many consumers trusted that EFAP were safe and nutritional. Members of the "not purchased group" also trusted the nutritional and sensory qualities of EFAP and recognized the safety issue, but they were not satisfied with the price, compared with general agricultural products. Consequently, to succeed in the market, EFAP should maintain the confidence of the consumer while decreasing in price.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.2
• /
• pp.161-168
• /
• 2001

The types of exposure data needed in an industry-based study depend on the diseases of interest and the study design to be used. The best situation occurs when we have quantified personal exposure estimates for the agents of interest, the least informative case occurs when we have only knowledge of the fact of employment in a plant, industry, or trade where exposure probability is high. Exposure information for most industry-based studies falls somewhere between these tow extremes. Job exposure matrices(JEM) are designed to link information on occupation with information on exposure to specific workplace hazards. Some forms of systematic error of bias may be less likely to occur in studies that utilize job-exposure matrices to indirectly infer exposures from job titles than in studies that assess exposures by asking subjects about their past exposure. JEM can be used effectively in industry-based studies for historic cohort studies, case-control study to assist with the retrospective assessment of occupational exposures among workers whose individual exposure histories are unavailable. JEM generally consist of a computerized database that links information about job categories and likely exposures. These two major axes may be stratified by calendar time. This article reviews the design of JEM in support of industry-based studies. Specific matrices may find broader applicability along with the increasing availability of detailed hygienic data.

• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.17-26
• /
• 2008

In this study, the design method of slope reinforced by the earth retention systems were systematically developed, and the flow chart of design procedure fur each system were constructed to design the slope rationally. The proposed design method is composed of 5 steps such as field condition investigation step, slope design step, landslide occurrence prediction step, slope failure scale estimation step and reinforcement countermeasure selection step. The quantitative standard of slope failure scale was established based on the arrangement of various overseas standards which is estimating the slope failure, and the analysis of slope failure scale which is occurred in the country. The slope failure scale is classified into three categories the small scale of slope failure is less than $150m^3$ of slope failure volume, the middle scale of slope failure is from $150m^3$ to $900m^3$ and the large scale of slope failure is more than $900m^3$. The earth retention system could be selected by the proposed slope failure scale based on the slope failure volume. Meanwhile, the design methods of earth retention system such as piles, soil nails and anchors were developed. The optimal countermeasure for slope stability could be proposed using above design methods.

• Fisheries and Aquatic Sciences
• /
• v.17 no.3
• /
• pp.313-318
• /
• 2014

From 2008 to 2013, the mussel Mytilus galloprovincialis were collected from a major area of mussel production (Changseon area), which is a designated shellfish-cultivating area for export, located on the southern coast of Korea. The samples were analyzed for mercury (Hg) using a direct Hg analyzer and for other metals, such as cadmium (Cd), lead (Pb), arsenic (As), chromium, copper, nickel, and zinc, using inductively coupled plasma mass spectrometry. The concentrations and bioaccumulation of the heavy metals were determined, and a potential risk assessment was conducted to evaluate their hazards towards human consumption. The concentration and bioaccumulation ratio of Cd were the highest of the three hazardous metals (Cd, Pb, and Hg). The concentrations of hazardous metals in all samples were within the limits set by Korea and other countries. The estimated dietary intake (EDI) was compared to the provisional tolerable daily intake (PTDI) adopted by the Joint FAO/WHO Expert Committee on Food Additives and the U.S. Environmental Protection Agency. The EDIs of all heavy metals tested for mussel samples ranged from 0.01 to 4.99% of the PTDI; the highest value was measured for As. The hazard index (HI) can be used to assess the risk of heavy metal consumption associated with contaminated food. The HI for all samples was far less than 1.0, which indicates that the mussels produced in the Changseon area do not represent an appreciable hazard to humans and are fit for consumption.