• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1366-1369
• /
• 2008

We introduce new instrument that provides the spectral radiance at any incidence and azimuth angle in all the visible range. LCD emission and transmittance properties of display components can be measured precisely at each incidence and azimuth angle and wavelength. Full polarization spectral analysis can be also made.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.859-862
• /
• 2008

We present a new tool to measure precisely the emissive properties of displays at the pixel level with submicrometric spatial resolution. It is useful to check the technological defects and their impact on the emissive properties of the displays. Backlight films and transflective and reflective displays are measured.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.122-126
• /
• 2002

Measuring color precisely requires the use of a colorimeter whose spectral response is as close as possible to the CIE response. Some techniques such as the NIST 4-color method can improve the precision. but under given conditions, the results can be worse.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.453-456
• /
• 2009

We present a new generation of imaging colorimeter that ensures improved accuracy and sensitivity for shorter measurement times. The imaging optics is telecentric on the sensor and allows measurements at any distances without additional calibration. A new technology is used to make the color filters and flat densities. Imaging polarimetry at fixed wavelength is also possible with the same instrument.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.791-794
• /
• 2004

In this article, we present a method to measure precisely the performances of direct-lit CCFL backlights using a luminance meter and dedicated image analysis software. The array of CCFL tubes alone can be measured directly and the luminance of each tube can be extracted along its main dimension. So, comparison of the different tubes on the same backlight can be made easily and the performances in terms of backlight uniformity improved. The influence of the diffuser sheet can be probed in the same way and the homogeneity of the entire surface of the backlight can be automatically extracted and quantified.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.475-478
• /
• 2004

In this paper, we describe a powerful solution for efficient LED wall calibration through the use of a quality 2D-luminance meter : the MURATest and a dedicated applicative software. The intended calibration allows adjusting individually the intensity of each LED so as to obtain a good uniformity on the module. Furthermore the intensity of each module can be adjusted one to the others so as to obtain a good uniformity on a complete display and maintain it even after module exchange for display maintenance needs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1615-1618
• /
• 2007

Performances of LCDs are generally evaluated in terms of luminance and color versus viewing angle. In the present paper we show that this type of display can be favorably characterized in terms of polarization. We show that ELDIM EZContrast instrument can be used to measure the degree of polarization the light and the ellipticity and polarization direction of the polarized component. This measurement is made versus incidence angle between 0 and $88{\circ}$ and for all the azimuth angles. Important differences between the displays can be detected and related to their internal structures when luminance and color profiles are quite similar.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.856-859
• /
• 2002

A system for high-resolution analysis of defective elementary cell (R, G or B) on Flat Panel Display (FPD) is described. Based on multiple acquisitions of low-resolution shifted images of the display, our system doesn't require a high-resolution sensor neither tedious alignment of the display, and will remain up to date even facing an important increase of the display dimensions. Our process, highly automated and thus flexible and robust, is expected to perform a full analysis in less than 60s. It is mainly intended for production tests and display classification by manufacturers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.602-605
• /
• 2005

In this paper, we present a model to calculate the influence of the measurement spot diameter MSD on the viewing angle measurements using a conoscopic instrument. This model is verified experimentally using an EZContrast instrument and the requirements for next generation of displays are presented. We show that last generation of EZContrast XL88W and L80W allowing measurement spot diameter up to 6mm can fulfill the requirements for all the FPD generations up to 80 inches diagonal.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.975-978
• /
• 2009

Even if auto-stereoscopic and polarization based 3D displays are not working with the same principles, their common aim is to provide two different images in the eyes of the observer. In this paper we show that Fourier optics instrument for viewing angle measurements can be applied to both types of displays. Luminance measurements are made at different locations and what will be seen by an observer in front of the display is predicted. Precise 3D characteristics can be derived and direct comparison becomes possible.