• 생명과학회지
• /
• 제25권8호
• /
• pp.925-931
• /
• 2015

미립 품질 향상을 위하여 미립 형태를 결정하는 특성을 위한 분자육종기술을 확립하기 위하여 미립과 관련된 양적형질 유전자좌를 탐색하고, 이들 환경요인과 상호작용 효과를 분석한 결과는 다음과 같다. 인디카 품종인 ‘청청’과 자포니카형인 ‘낙동’이 교배된 조합 F₁의 약배양에 의해 양성된 120 계통(DH 집단)과 217개의 DNA 마커를 이용하여 전체 길이가 2,067cM이고, 마커간 평균거리가 9.5cM인 유전자 지도를 작성하였다. 미립형태 관련 유전자좌 분석에서 미립의 외형인 길이, 폭, 두께, 장폭비, 천립중과 관련하여 14개의 QTL이 탐색되었다. 현미의 미립길이 관련 3개의 QTL (qGL2, qGL5, qGL7), 미립 폭 관련 3개의 QTL (qGW2-1, qGW2-2, qGW2-3), 미립 두께 관련 1개의 QTL (qGT2), 장폭비 관련 6개의 QTL (qLWR2-1, qLWR2-2, qLWR2-3, qLWR2-4, qLWR7, qLWR12) 및 천립중 관련 1개의 QTL (qTGW8)이 선발되었다. 미립 장폭비 관련 4개의 QTL은 미립길이와 미립두께에서 동일한 염색체 상에서 확인되었다. 본 연구에서 구명된 QTL 마커들은 쌀 품종개량을 위하여 이용될 수 있을 것이라 판단된다.

• 한국소음진동공학회논문집
• /
• 제25권6호
• /
• pp.420-425
• /
• 2015

In this paper a transfer matrix method is developed to solve for bending vibration of beam with linearly reduced width, and subsequently used to determine the exact natural frequencies for such problems. The differential equation, shear force, and bending moment are derived from Hamilton's principle, and the roots of the differential equation are computed using the power series solution of the Frobenius method. The effect of various taper ratio for bending vibration of beam with linearly reduced width is investigated in detail, and to validate the accuracy of the proposed method the results computed are compared with those given from commercial software(ANSYS).

• 한국항공운항학회지
• /
• 제8권1호
• /
• pp.67-81
• /
• 2000

An experimental study was performed on the time lag, lift and drag characteristics of a multi functional spoiler which is a device to increase lift and drag contrary to conventional spoiler which decrease lift and increase drag. In this study, a wind tunnel investigation was made of the effect of incidence angle, slot width, and chordwise location of multi functional spoiler on the time lag, lift and drag characteristics of a wing. The results indicate that the time lag of a multi functional spoiler is influenced mainly not only by the chordwise location of a spoiler but also by the slot width between spoiler and wing upper surface. Multi functional spoiler can reduce time lag effectively by slotting the trailing edge of spoiler with slot ratio (slot width devided by the wing chord length) between 0.05 and 0.1. Also, it shows that the lift and drag coefficients of the wing with the multi functional spoiler and trailing edge flap are increased by 20% and 80%, respectively, compared to the wing with trailing edge flap only.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.613-616
• /
• 2003

Steel-concrete composite columns are used extensively in modern buildings. Extensive research on composite columns in which structural steel are in concrete have been carried out. In-filled composite columns, however have received limited attention compared to encased columns. In this paper, interrelationship of parameters is examined into analyzing and comparing with data through ABAQUS program and experiment on concrete filled tubular column under axial load and propriety of model is checked out by FEM analysis. The main variations of this paper are width-thickness ratio of the section(B/t =33.3, 38.9, 44.4), concrete strength($f_{ck}$=240, 360kgf/$\textrm{cm}^2$), and width-length ratio($L_o$/B=8.0, 10.0, 12.0, 15.0, 20.0). The ultimate value obtained through analysis is compared with test value and calculated by design code of other countries and previous studies.

• 한국인터넷방송통신학회논문지
• /
• 제11권1호
• /
• pp.47-52
• /
• 2011

본 논문에서는 모드전송선로 이론과 유효유전체 해석법을 결합한 새로운 해석법이 초소형 전송폭을 갖는 3차원 구조의 광 다중모드 간섭결합기의 설계특성을 분석하기 위하여 사용되었다. 결합된 해석법에 기초한 다중모드 간섭결합기의 결합효율을 정의하였으며, 3 dB 결합기, cross 결합기 그리고 bar 결합기의 결합 특성을 나타내는 결합길이를 수치해석적으로 결정하였다. 수치해석 결과 본 논문에서 설계한 다중모드 간섭결합기는 낮은 insertion loss와 높은 splitting ratio를 갖는 특성을 보였다.

• 한국항행학회논문지
• /
• 제26권5호
• /
• pp.344-349
• /
• 2022

UWB 응용을 위해 스트립이 추가된 직각 삼각형-모양의 다이폴 소자로 구성된 소형 대수 주기 다이폴 배열 (LPDA; log periodic dipole array) 안테나를 제안하였다. 첫째, LPDA 안테나의 폭을 줄이기 위해 기존의 스트립 다이폴 소자 대신에 직각 삼각형-모양 다이폴 소자를 사용하였다. 둘째, 소자 사이의 간격을 줄여 LPDA 안테나의 길이를 줄였다. 마지막으로, 안테나의 폭을 더 줄이기 위해 직각 삼각형-모양 다이폴 소자의 양 팔의 끝에 스트립을 추가하였다. 16개의 다이폴 소자와 4 dBi 이상의 이득을 가지도록 제안된 안테나의 시제품을 FR4 기판에 44mm×30mm 크기로 제작하였다. 제작된 안테나의 전압 정재파비가 (VSWR; voltage standing wave ratio) 2 이하인 주파수 대역은 2.99-14.76 GHz로 UWB 대역을 만족하며, 측정된 이득은 4.0-5.5dBi이고 전후방비는 10 dB 이상이다. 제안된 소형 LPDA 안테나의 길이와 너비는 기존 LPDA에 비해 각각 40.9%와 20.6% 감소하였다.

• 한국분무공학회지
• /
• 제7권1호
• /
• pp.29-35
• /
• 2002

This study describes the external spray characteristics of deflector nozzle such as the breakup procedures of liquid sheet, spray angle, breakup length and bubble behaviors of spray at deflector nozzle. In order to visualize the spray behaviors shadow graphy technique were used. According to the increase injection pressure, deveopment of the spray passes through the dribbling, distoted jet, closed bubble due to the contraction by form a conical sheet like as the simplex swirl atomizer. As trying the analysis of the ratio of bubble length and width it was found that the ratios is comparable. Spray cone angle was nearly $90^{\circ}$.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.221-225
• /
• 2018

In this paper, vibration analysis of concrete foundations resting on soil medium is studied. The soil medium is simulated by Winkler model considering spring element. The concrete foundation is modeled by thick plate elements based on classical plate theory (CPT). Utilizing energy method consists of potential energy, kinetic energy and external works in conjunction with Hamilton's principle, the motion equations are derived. Assuming the simply supported boundary condition for the concrete foundation, the Navier method is used for calculating the frequency of the structure. The effect of different parameters such as soil medium, mode numbers, length to width ratio and length to thickness ratio of the concrete foundation are shown on the frequency of the structure. At the first, the results are validated with other published works in order to show the accuracy of the obtained results. The results show that considering the soil medium, the frequency of the structure increases significantly.

• 한국연초학회지
• /
• 제10권1호
• /
• pp.11-19
• /
• 1988

This study was conducted to relate among growth characteristics, quality, and chemical components for flue-cored tobacco. The results are summarized as follows : 1. Starch content in harvested green leaf was correlated negatively with leaf length, leaf width, leaf area, and leaf weight of harvested green leaf, respectively, while positively with total sugar content in cured leaf, and the ratio of leaf length to leaf width of harvested green leaf. 2. Organic matter and total nitrogen contents in the soil were correlated positively with nicotine content in cured leaf, respectively, and total nitrogen in the soil negatively with total sugar content in cured leaf. 3, Amount of fertilizer, application date of MH, priod of harvesting, and yield were correlated positively with nicotine content in cured leaf, respectively , while negatively with total sugar content. Application amount of MH was correlated positively with total sugar content, but negatively with nicotine content in cured leaf. Also amount of compost was correlated negatively with nicotine content in cured leaf. 4. The ratio of total sugar to nicotine (TS/N) per plant was correlated positively with price (Won/kg) and specific leaf area, but negatively with leaf length. leaf width, leaf area, harvested leaves, and leaf weight in cured leaves, respectively. Yield was correlated negatively with TS/N per plant. 5. TS/N of the best quality tobacco per plant was 12.0. Those of the best quality tobacco in each stalk position were 42.1 for first~third leaf, 28.4 for 4th~6th leaf , 23.7 for 7th~9th leaf, 7.7 for l0th~12th leaf , and 7.8 for over 13th leaf from bottom, respectively. 6, When TS/N was 12.0, optimum values of growth characteristics per plant were 100.5 $\pm$ 10.3g for leaf dry weight, 755.1$\pm$53.2cm for leaf length, 294.4$\pm$25.1cm for leaf width, 8, 892$\pm$111cm2 for leaf area, 16.0$\pm$0.6 leaves for harvested leaves, and 7.32$\pm$0.44mg/cm2 for specific leaf area, respectively. 7. When TS/N was 12.0, optimum values of chemical components per plant were 1.92$\pm$0.28% for nicotine content, and 20.4$\pm$ 1.4 % for total sugar content, and that of yield was 238.3$\pm$ 9.8kg/10a.

• Current Research on Agriculture and Life Sciences
• /
• 제1권
• /
• pp.19-26
• /
• 1983

동할발생조건(胴割發生條件)에 대(對)한 미립(米粒)의 형태(形態)나 성분함량(成分含量)의 영향(影響)을 알고저 비료시용방법(肥料施用方法)을 달리하여 재배(裁培)한 벼의 동할립(桐割粒)과 건전립(健全粒)을 구분(區分)하여 분석(分析)해본 결과(結果) 동할발생(桐割發生)은 삼강(三剛)벼가 락동(洛東)벼보다, 만기수확구(晩期收穫區)가 적기수확구(適期收穫區)보다 많았으며 3요소외(三要素外)에 규산질비료(珪酸質肥料)를 병용함으로서 동할율(桐割率)이 감소(減少)되었다. 동할립(桐割粒)은 건전립(健全粒)에 비(比)하여 천립중(千粒重) 및 미립(米粒)의 체적(體積)(립장(粒長)${\times}$립폭(粒幅)${\times}$립후(粒厚)), 립장(粒長), 립장(粒長)/립폭(粒幅)이 컸으며 품종간(品種間)에는 미립(米粒)의 립장(粒長)/립폭비(粒幅比)가 큰 삼강(三剛)벼가 락동(洛東)벼보다 동할율(胴割率)이 높았다. 동할(胴割)이 비교적(比較的) 잘 되는 삼강(三剛)벼는 미립내(米粒內) 규산함량(珪酸含量)이 낮았고 인산함량(燐酸含量)이 높았으며 동할(胴割)이 잘 안되는 락동(洛東)벼는 그 반대(反對)이었다. 그래서 삼강(三剛)벼는 미립내(米粒內) 규인비(珪燐比)가 낮았고 락동(洛東)벼는 높았으며 비료삼요소(肥料三要素)에 규산(珪酸)을 시용(施用)함으로서 그 함량비(含量比)를 높일수 있었다.