• Phonetics and Speech Sciences
• /
• v.9 no.1
• /
• pp.9-17
• /
• 2017

The current study examined speech rate and its variance in spontaneous Seoul Korean speech. The current study focused on factors affecting the variance of speech rate such as utterance length, individual speakers, and gender. The results revealed that, first, utterance length has a significant influence on speech rate. Longer utterances were spoken at a faster rate. Second, regarding the effect of utterance length, individual speakers differed significantly in their speaking rate. The variation between speakers and within speakers tended to increase as utterance length increases. Third, there were speakers' gender differences, indicating that males produced considerably faster speaking rate than females. Additionally, the current study implied that non-linguistic factors in spontaneous speech can affect the variance of speakers' speaking rate.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.1
• /
• pp.51-58
• /
• 2012

As a basic study to improve hooking ability of long line fishing gear, which is widely used around Jeju-do coast, the researcher performed hooking experiment of parrot fish by manufacturing and installing 7 kinds of model long line fishing gears, whose thickness of branch line are different and 8 kinds of model long line fishing gear, whose length of branch line are different, in indoor circular aquarium, which is installed for the model experiment of thickness and length of branch line that are various by fishing implement and improper. The hooking rate depending on thickness and length of branch line was calculated and the effect of thickness and length of branch line on hooking rate was analyzed. Its results are as follows. When branch line was thin and long, high hooking rate appeared. In the scope of value setting, the relationship between thickness ($B_t$) of branch line and total hooking rate ($Th_r$) can be shown as following formula as. In the scope of value setting, the relationship between length ($B_t$) of branch line and total hooking rate ($B_t$) can be shown as $Th_r=-20.83B_t+26.04$. Through Pearson correlation analysis, the coefficient of correlation between thickness of branch line and hooking rate was -0.718. Therefore it showed significance in 0.01 significance level. Through Pearson correlation analysis, the coefficient of correlation between length of branch line and hooking rate was 0.431. Therefore it showed significance in 0.01 significance level.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.7
• /
• pp.1-14
• /
• 1999

In the present study, the flame factor which primarily influence the simulation accuracy of the combustion process in a gasoline engine was modeled as a nonlinear function of turbulent intensity to laminar flame speed ratio. Multi-length-scale production rate model for turbulent kinetic energy equation was introduced to consider the different length scales of the swirling and tumbling motions in cylinder on the production rte of turbulent kinetic energy. By7 introducing the multi-length-scale production rate model for the turbulent kinetic energy equation, the predictions of turbulent burning velocity , cylinder pressure, mass burning rate and engine performance of a gasoline engine can much be improved.

• Journal of Korean language education
• /
• v.29 no.3
• /
• pp.345-363
• /
• 2018

The purpose of this study is to compare the speech rate of advanced Korean(L2) learners and Korean native speakers in spontaneous utterances. Specifically, the current study investigated the difference of the two groups' speech pattern according to utterance length. Eight advanced Korean(L2) learners and eight Korean native speakers participated in this study. The data were collected by recording their conversation and physical measurements (speaking rate, articulatory rates, pause and several types of speech disfluency) were taken on extracted 120 utterances from 12 out of the 16 participants. The findings show that advanced Korean learners' speech pattern is similar to that of Koreans in the short-length utterance. However, in the long-length utterance, two groups show different speech patterns; while the articulatory rate of Korean native speakers increased in the long-length utterance, that of Korean learners decreased. This suggests that the frequency of speech disfluency factors might affect this result.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.3021-3031
• /
• 1994

Experiments have been performed to find out the effect of the mixing port length of Y-jet atomizers on the spray performance, using air and water as the test fluids. Water and air flow rates and drop sizes were measured at each injection pressure condition for different mixing port length. The air flow rate was almost unaffected by the change of the mixing port length. However, the water flow rate was relatively susceptible to the change of the mixing port length. The mixing point pressure was very much influenced by the mixing port length. Variations of spatial distribution of Sauter Mean Diameter (SMD, $D_{32}$) and the cross-section-averaged SMD ($D_{32,m}$) with different mixing port length and air/water mass flow rate ratio were examined. Generally, when the mixing port length was reduced, the mean drop size decreased and became spatially even.

• Journal of ILASS-Korea
• /
• v.26 no.1
• /
• pp.9-17
• /
• 2021

Six shear coaxial injectors with different recess length and taper angle were manufactured. Cold-flow tests on the injectors were performed at room temperature and pressure using water and air as simulants. By changing the water mass flow rate and air mass flow rate, spray images were taken under single-injection and bi-injection. Breakup length and spray angle were analyzed from instantaneous and averaged spray images using image processing techniques. For all the injectors, the breakup length generally decreased as the momentum flux ratio increased at the same gas mass flow rate. The injectors with 7.5° taper angle usually had the longest breakup length and the smallest spray angle. When the taper angle was 15° or more, it hardly affected breakup length and spray angle. The recess length did not influence breakup length but its effect on spray angle depended on the taper angle.

• Journal of Power System Engineering
• /
• v.4 no.3
• /
• pp.34-39
• /
• 2000

Performance data in the literature on air lift pumps have been based primarily on pumps of long length and large diameter (high lift pumps). Since mariculture operations involve pumps of relatively short length and small diameter, performance data are required for efficient operation. To provide such data, an experimental apparatus was designed and fabricated to test all lift pumps from 2.1 to 3.4 cm inside diameter and from 40 to 300 cm in length. Instrumentation was provided to measure water flow rate and air flow rate as well as water temperature, air temperature, and pressure throughout the system. Results from this study correlate well with high lift pump data in that, for a given pump geometry, maximum water flow occurs for a specific air flow rate. Driving the pump with air flows larger or smaller than this optimum flow rate will decrease the pumping rate. The optimum flows are significantly different for low lift pumps compared to high lift pumps. However, the pumping rate for low lift pumps approaches that for high lift pumps with increasing length.

• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.821-829
• /
• 2019

This study investigated the location of grading lines and grading amount for a jacket item by the target age groups (20-30, 30-40, and 40-50) for 17 women's wear brands. This study then utilized 7th SizeKorea data to analyze the increase rate of body size and to suggest the grading deviation distribution ratio of the jackets using regression analysis. The increase in neck girth of the jackets targeting aged 30-40s did not reflect the human body change rate. The shoulder length increased by 4.6%-8.1% with the bust girth increase; however, the brands produced longer shoulder length reflecting 20-35% of the bust girth increase. The armhole girth was 54.9% - 59.7% of bust circumstance increase rate. However, the 20-30 target age group brands distributed 80% of bust girth to armhole girth and the 30-40 and the 40-50 target age group brands distributed 50% of the bust girth to armhole. In particular, the 20-30 target age group brands were found to produce a large margin around the armhole. When it came to length items, the brands targeting 20-30s and the 40-50s reflected deviation distribution rate of length from underarm to waist and length from waist to hip in comparison with the overall jacket length deviation. The 30-40 target age group brands, 8 out of 20 brands distributed the jacket length deviation in the length from the back of neck to the underarm; consequently, only 22% percent should be distributed in this part.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.166-170
• /
• 1999

The identification of quantitative trait loci (QTL) has the potential to enhance the efficiency of im- proving food processing traits of soybean. In this study, 92 restriction fragment length polymorphism (RFLP) loci and two morphological markers (W$_1$ and T) were used to identify QTL associated with food processing traits of soybean for sprout in 83 F$_2$-derived lines from a cross of ＇Pureun＇ x ＇Jinpum 2＇. The genetic map consisted of 76 loci which covered about 760 cM and converged into 20 linkage groups. Eighteen markers remained unlinked. Phenotypic data were collected for hypocotyl length, abnormal seedling rate, and sprout yield seven days after seed germination at 2$0^{\circ}C$. Based on the single-factor analysis of variance, eight independent markers were associated with hypocotyl length. Four of seven markers associated with abnormal seedling rate were identified as independent. Seven loci were associated with sprout yield. For three different traits, much of genetic variation was explained by the identified QTL in this population. Several RFLP markers in linkage group (LG) Bl were detected as being associated with three traits, providing a genetic explanation for the biological correlation of sprout yield with hypocotyl length (r=OA07＊＊＊) and with abnormal seedling rate (r=-406＊＊＊).

• Speech Sciences
• /
• v.13 no.3
• /
• pp.83-95
• /
• 2006

This study attempts to suggest a criterion of Korean language development. For this purpose we investigated speaking rates of the spontaneous utterances produced by 144 children, aged 3 to 8. We analyzed each subject's speaking rate and its relevance with speaker's age, gender and utterance length. To determine the relative contributions of variables to the speaking rate, multiple regression was conducted. Results of this study can be summarized as follows: (1) The mean and maximum values of the speaking rate increased with the growth of age. (2) A statistically significant increase in speaking rate appeared at two-year intervals. (3) There was no significant difference between male and female groups in the speaking rate. (4) The multiple regression analysis has shown that along with the speaker's age, the utterance length(the mean number of syllables per utterance) is also important in estimating the speaking rates.