• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.11-14
• /
• 2007

Noise level and Airflow amount of a kitchen hood are affected by the conditions of airflow path. Thus this study is expected to be used as a basic reference in designing airflow path of apartment housing throughout analysing changes in noise level and airflow amount from the various conditions of airflow path. Noise level generated by the kitchen hood is estimated in a kitchen and a living room of two constructed apartment houses, and an experiment is conducted in an half anechoic chamber to analyze noise level and airflow amount by the different length, diameter and number of windings of a round shaped soft duct which is connected to the kitchen hood. The measured results in apartment houses show that the noise level in both apartments exceeds the NC standard greatly in living spaces. In apartment A, a regular apartment house, the noise level was $NC-65{\sim}75$, $NC-45{\sim}60$ and NC-70, NC-45 in the kitchen and living room with an operation of kitchen hood in 1 and 3 stages. In apartment B, an apartment complex, the noise level was NC-55 and NC-60 in the kitchen and living room with an operation of kitchen hood in 3 stages. In particular, there was an increase of noise level at 125Hz-band resulted from an amplification of sound, which requires adequate measures in noise reduction. The results measured in Half anechoic chamber show 99% of airflow amount increase with the modification of a duct' s diameter from ${\Phi}$ 100mm to ${\Phi}$ 125mm, 37% of airflow amount increase with the modification of a duct' s diameter from ${\Phi}$ 125mm to ${\Phi}$ 150mm, and 173% of airflow amount increase with the modification of a duct' s diameter from ${\Phi}$ l00mm to ${\Phi}$ 150mm. The noise level was lower than the level measured in apartment housing about 20 in NC-value and 11.4 in dB(A)-value, which was interpreted as the effect of the load by the pressure condition at the rear end of the duct. Also, an amplification of sound in 125Hz-band influenced NC-value considerably, therefore effective measure is needed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.5
• /
• pp.251-258
• /
• 2018

In construction site, conventional methods such as jackhammer or explosive methods(dynamite) have been often used for the demolition of structures. Use of those methods are more carefully treated in environmentally and historically sensitive area. For those reasons, use of Soundless Chemical Demolition Agent(SCDA) is getting the spotlight. The SCDA is a powder which has expansive strength when it is mixed with water. In these Characteristics, SCDA can destroy the concrete or rock as it is poured into boreholes of the concrete or rock structures. However, there is no industrial standard for the use of SCDA effectively yet. In this study, experimental study to measure the expansive pressure was conducted depending on various boundary conditions such as waterproof, length of the steel pipe, submerged of steel pipe. Furthermore, computational analysis using damage plasticity model to predict the minimum required pressure of the SCDA for the concrete demolition depending on spacing between holes(k-factor) and compressive strength of the concrete was conducted. Obtained results indicates that water heat dissipation with submerged steel pipe shows the stable pressure for measuring the SCDA and hole distance(k-factor) is the most important factor for crack initiation of concrete.

• Structural Engineering and Mechanics
• /
• v.15 no.4
• /
• pp.381-394
• /
• 2003

While constructing multistorey buildings with reinforced concrete framed structures it is a common practice to provide parking space for vehicles at the ground floor level. This floor will generally consist of open frames without any infilled walls and is called an open-storey. From a post disaster damage survey carried out, it was noticed that during the January 26, 2001 Bhuj (Gujarat, India) earthquake, a large number of reinforced concrete framed buildings with open-storey at ground floor level, suffered extensive damage and in some cases catastrophic collapse. This has brought into sharp focus the need to carry out systematic studies on the seismic vulnerability of such buildings. Determination of vulnerability requires realistic structural response estimations taking into account the stochasticity in the loading and the system parameters. The stochastic finite element method can be effectively used to model the random fields while carrying out such studies. This paper presents the details of stochastic finite element analysis of a five-storey three-bay reinforced concrete framed structure with open-storey subjected to standard seismic excitation. In the present study, only the stochasticity in the system parameters is considered. The stochastic finite element method used for carrying out the analysis is based on perturbation technique. Each random field representing the stochastic geometry/material property is discretised into correlated random variables using spatial averaging technique. The uncertainties in geometry and material properties are modelled using the first two moments of the corresponding parameters. In evaluating the stochastic response, the cross-sectional area and Young' modulus are considered as independent random fields. To study the influence of correlation length of random fields, different correlation lengths are considered for random field discretisation. The spatial expectations and covariances for displacement response at any time instant are obtained as the output. The effect of open-storey is modelled by suitably considering the stiffness of infilled walls in the upper storey using cross bracing. In order to account for changes in soil conditions during strong motion earthquakes, both fixed and hinged supports are considered. The results of the stochastic finite element based seismic analysis of reinforced concrete framed structures reported in this paper demonstrate the importance of considering the effect of open-storey with appropriate support conditions to estimate the realistic response of buildings subjected to earthquakes.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.1
• /
• pp.41-45
• /
• 2009

Background: Reduced bone height is one of the major problems faced in restoring tooth loss with implants. By the use of short implants, it is possible to reduce complicated and invasive treatment such as bone graft, allowing more simple surgery. But short implants are generally considered to have lower success rates than that of standard implants. Purpose: To assess the results of short Straumann implants by a retrospective study of short Straumann implants with TPS(titanium plasma-sprayed) and SLA(sandblasted, large grit, acid etched) surfaces. Materials and methods: 173 implants in 106 patients who received short Straumann implant surgery(${\le}8\;mm$) in the department of oral and maxillofacial surgery, Kyunghee Dental Hospital, from February 1996 to October 2006 were selected and studied. All of the implants were followed up after prosthetic rehabilitation. The average follow-up period was 34 months with 119 months as the longest follow up period. The average follow-up period after prosthetic rehabilitation was 31 months. 64 females(60.4%) and 42 males(39.6%) participated in the research with the age range of 19 to 85(mean age 47). 20 patients(18.9%) were under 40, 85 patients(80.2%) were over 40 and under 70, and only one patient(0.9%) was over 70 years old. Results: 27 implants(15.6%) had TPS surface while 146 implants(84.4%) had SLA surface. 9 implants(5.2%) were 3.3, 108 implans(62.4%) were 4.1mm and 56 implants(32.4%) were 4.8mm in diameter. 167 implants(96.5%) were 8mm and 6 implants(3.5%) were 6mm in length. There were 24 implants(13.9%) on the maxillas and 149 implants(68.8%) on the mandibles. 119 implants(68.8%) were rehabilitated with FPD(fixed partial denture), 47 implants(27.2%) with single crowns and 4 implants(2.3%) with overdentures. Among the fixed partial dentures, 30 of them were splinted with short implants only. After over an year of follow-up period, 139 implants(96.5%) out of 144 implants showed marginal bone loss of less than 1mm. 3 out of 173 implants failed showing 98.27% survival rate. Conclusions: The use of short Straumann implants(${\le}8mm$) can be a simple and reliable treatment method in minimal residual bone height.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.5
• /
• pp.559-566
• /
• 2007

Distraction osteogenesis(DO) is a surgical method of bone formation that involves an osteotomy and sequential stretching of the healing callus by gradual movement and subsequent remodeling. DO is used to correct facial asymmetry, such as in patients with hemifacial microsomia, maxillary or mandibular retrusion, cleft lip and palate, alveolar defects, and craniofacial deficiency. It is accomplished with the aid of a distraction device, which is secured with screws placed directly into bone, for a predetermined length of time. Hemifacial microsomia is characterized by unilateral facial hypoplasia, often with unilateral shortening of the mandible and subsequent malocclusion. Patients with hemifacial microsomia and facial asymmetry have a vertically short maxilla, tilted occlusal plane, and short mandible. Early treatment is necessary to avoid subsequent impaired midfacial growth. The standard treatment of these malformations consists of the application of bone grafts, which can lead to unpredictable growth. The new bone-lengthening procedure represents a limited surgical intervention and opens up a new perspective for treatment, especially in younger children with severe deformities. This report describes a case of hemifacial microsomia(Type-II left-sided hemifacial microsomia). The patient, a 10-year-old child, visited our clinic for facial asymmetry correction. He had a hypoplastic mandible, displaced ear lobe, 10 mm canting on the right side, and malocclusion. We planned DO to lengthen the left mandible in conjunction with a Le Fort I osteotomy for decanting and then perform a right intraoral vertical ramus osteotomy(IVRO). Progressive distraction at a rate of 0.5 mm/12 hours was initiated 7 days postoperatively. The duration of DO was 17 days. The consolidation period was 3 months. Satisfactory results were obtained in our case, indicating that DO can be used successfully for functional, aesthetic reconstruction of the mandible. We report a case involving DO in conjunction with orthognathic surgery for correcting mandibular hypoplasia with a review of the literature.

• Korean Journal of Ichthyology
• /
• v.25 no.1
• /
• pp.17-24
• /
• 2013

The feeding habits of Repomucenus lunatus were studied using 232 specimens collected from January to December 2006 in the coastal waters off Gori, Korea. The size of R. lunatus ranged from 4.7 to 14.0 cm in standard length (SL). R. lunatus was a bottom-feeding carnivore which consumed mainly amphipods and polychaetes. Its diet also included small quantities of shrimps, cumaceans, bivalvies, gastropods, crabs, copepods, euphausia, mysids, stomatopods, ostracods and sipunculides. Amphipods were eaten predominantly for the smallest size class. The proportions of polychaetes increased gradually with increasing fish size and large size class of R. lunatus mainly consumed polychaetes. The feeding strategy graphical method revealed that R. lunatus is a specialized feeder. The mean number and weight of preys per stomach of larger size classes were higher than those of smaller size classes. The mean weight of preys per stomach ontogenetically changed with size classes.

• Korean Journal of Plant Resources
• /
• v.16 no.3
• /
• pp.223-229
• /
• 2003

This study was carried out to investigate the optimum ionic strength of nutrient solution were treated with a quarter, a half, three quarters, standard, one and half, and double ionic strength of balanced nutrient solution of Yamazaki solution recommended for cucumber plants. Plant height and number of loaves of growing period were rapidly increased in 1/2 ionic strength of nutrient solution. Growth characteristics of cucumber plant as affected by the different ionic strength of nutrient solution were not significant differences, however, in the growing period, plant height, stem length and leaf area were highest in 1/2 ionic strength of nutrient solution. Fruit yield of cucumber plant as affected by the different ionic strength of nutrient solution was not significant differences, however, fruit yield was highest in 1/2 ionic strength of the lowering ionic strength of nutrient solution. Nitrogen concentration was not significant differences, however, it was high corcentration in 1/2 ionic strength of nutrient solution. Growth and yield characteristic of cucumber as affected by 1/2 ionic strength of nutrient solution at 36 days transplanting analyzed correlation cofficient. Plant height showed positive correlated with number of plant and positive correlated with yield.

• Journal of Gastric Cancer
• /
• v.9 no.1
• /
• pp.6-9
• /
• 2009

Gastric cancer with gastric outlet obstruction has a high incidence of direct invasion into neighboring organs, with a low resection rate and a poor prognosis. Traditionally, open gastrojejunostomy has been the standard palliative treatment in these patients. Recently, endoscopic self-expanding metal stents have been used increasingly for the palliative treatment of malignant gastric outlet obstruction, but the choice of modality to treat the obstruction caused by gastric cancer is still controversial. Many studies have shown that endoscopic stenting is less invasive and offers not only a shorter time to oral intake and length of hospital stay, but also less frequent complications compared to open gastrojejunostomy. However, recurrent obstruction by tumor overgrowth and ingrowth occur more frequently and re-intervention for recurrent obstructive symptoms are more frequently performed after stent placement than after gastrojejunostomy. Thus, stent placement may be associated with more favorable results in patients with a relatively short life expectancy, while gastrojejunostomy is preferable in patients with a more prolonged prognosis. Also, open surgery affords a greater chance for curative surgery. However, most underlying diseases analyzed in previous studies were pancreaticobiliary malignancies, and there have been few prospective studies specific for patients with gastric cancer. Additional randomized controlled trials with larger sample sizes are expected to decide the treatment modality for unresectable gastric cancer with gastric outlet obstruction.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.29-36
• /
• 1999

The objective of this study is to analyse the flow field in the branching duct by visualizing the flow phenomena using the PIV system. A bifurcation model is fabricated with transparent acrylic resin to visualize the whole flow field with the PIV system. Water was used as the working fluid and the conifer powder as the tracer particles. The single-frame and two-frame methods of the PIV system and 2-frame of the grey level correlation method are applied to obtain the velocity vectors from the images captured in the flow filed. The velocity distributions in a lid-driven cavity flow are compared with the so-called standard experimental data, which was obtained from by 4-frame method in order to validate experimental results of the PIV measurements. The flow patterns of a Newtonian fluid in a branching duct were successfully visualized by using the PIV system and the sub-pixel and the area interpolation method were used to obtain the final velocity vectors. The velocity vectors obtained from the PIV system are in good agreement with the numerical results of the 3-dimensional branch flow. The results of numerical analyses and the PIV experiments for the three-dimensional flows in the branch ing duct show the recirculation zone distal to the branching point and the sizes of the recirculation length and height of the tow different methods are in good agreement.

• Journal of Educational Research in Mathematics
• /
• v.23 no.3
• /
• pp.313-333
• /
• 2013

In this research, the researchers constructed a survey questionnaire for measuring the multicultural competence of Korean mathematics teachers and administered the survey to 309 mathematics teachers. The analysis indicates that Korean mathematics teachers' level of multicultural competence is rather low (the mean is 2.636 and the standard deviation .290). In particular, the mean of the multicultural competence related to mathematics was lower than the mean of the multicultural competence in general. Moreover, there was no significant difference between the groups according to the length of teaching experience, the participation into the course in multicultural teacher education, and the experience of indirect exposure to people of different cultural background. On the contrary, the experience of direct exposure to people of different cultural background and teachers' major led to a significant difference in the within group comparison. Moreover, the analysis showed that mathematics teachers' level of competence in subject matter had significant impact on their teaching practice responsive to students' backgrounds. Based on the results, the researchers presented implications for the development of multicultural mathematics teacher education to enhance mathematics teachers' competence required for their teaching in culturally diverse school.