• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.1
• /
• pp.30-37
• /
• 2006

Black rockfish and goldeye rockfish are commercially important fish species due to the increasing demand in Korea. When estimating the abundance of stocks for these species acoustically, it is of crucial importance to know the target strength(TS) to length dependence. In relation to these needs, TS measurement was conducted on black rockfish and goldeye rockfish in an acrylic salt water tank using 70kHz and 120kHz split beam echo sounders. The TS for these two species under the controlled condition was simultaneously measured with the swimming movement by DVR system and analyzed as a function of fish length(L). The results obtained are summarized as follows: The best fit regression of TS on fish length of black rockfish was TS=19.38 Log(L, cm)-70.46 ($r^2=0.71$) at 70kHz and TS=22.39 Log(L, cm)-70.40 ($r^2=0.64$) at 120kHz and in the standard form TS=20 Log(L, cm)-71.29 ($r^2 = 0.70$) at 70kHz and TS=20 Log(L, cm)-66.88 ($r^2=0.57$) at 120kHz. The best fit regression of TS on fish length of goldeye rockfish was TS=17.10 Log(L, cm)-68.28 ($r^2=0.37$) at 70kHz and TS=24.39 Log(L, cm)-73.74 ($r^2=0.59$) at 120kHz and in the standard form TS=20 Log(L, cm)-72.03 ($r^2=0.32$) at 70kHz and TS=20 Log(L, cm)-67.68 ($r^2=0.64$) at 120kHz. An empirical model for fish TS(dB) averaged over the dorsal aspect of 115 fishes of black rockfish and goldeye rockfish and which spans the fish length(L, m) to wavelength($\lambda$, m) ratio between 8 and 30 was derived : TS=34.12 Log(L)-14.12 Log($\lambda$)-23.83, ($r^2=0.90$).

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.39-42
• /
• 2005

H.264, a recently proposed international video coding standard, has adopted context-based adaptive variable length coding (CAVLC) as the entropy coding tool in the baseline profile. By combining an adaptive variable length coding technique with context modeling, we can achieve a high degree of redundancy reduction. However, CAVLC in H.264 has weakness that the correct prediction rate of the variable length coding (VLC) table is low in a complex area, such as the boundary of an object. In this paper, we propose a VLC table prediction scheme considering multiple reference blocks; the same position block of the previous frame and the neighboring blocks of the current frame. The proposed algorithm obtains the new weighting values considering correctness of the VLC table for each reference block. Using this method, we can enhance the prediction rate of the VLC table and reduce the bit-rate.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.701-706
• /
• 1994

The discharge coefficients of critical sonic nozzles were obtained in a high pressure gas flow standard system, which was a gravitational weighing system. The discharge coefficients of critical sonic nozzle farbricated according to ISO specifications are in good agreement with ISO correlation. The discharge coefficients for small inlet radius decrease significantly as the inlet length become short due3 to separation at the sharp-edged inlet. For nozzles having long inlet radius, the effects of inlet length on the discharge coefficients were relatively small, but the effects become significant at the short inlet length. The effect of separation at the sharp-edged inlet is stronger than that of the boundary layer growth. The experimental results support that the shape of critical sonic nozzles suggested by ISO specifications is excellent.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.135-143
• /
• 1999

This investigation evaluates effects of notch depth, fatigue precrack length and side groove in impact specimen for estimation of a valid K1d by instrumented Charpy impact test. Specimen material is 6005-T6. for notch depth 2.0mm and 2.5mm specimens or within about 2mm fatigue precrack length with notch depth 2.0mm and 2.5mm specimens or within about 2mm fatigue precrack length with notch depth 2.0mm , dynamic fracture toughness [$K_{1d,(1)}$] obtained by crack initiation load($P_m$) should be used. Dynamic fracture toughness of side grooved specimens are overestimated to that of standard impact specimen about 15 %-20%. It is confirmed that the formula of dynamic fracture toughness obtained by impact absorbed energy is inappropriate for ductile materials.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.148-155
• /
• 2008

We investigated the damage effects of microcontroller devices under high power electromagnetic(HPEM) wave. HPEM wave was radiated from the open-ended standard rectangular waveguide(WR-340) to free space. The influence of different reset-, clock-, data-, and power supply-line lengths has been tested. The susceptibility of the tested microcontroller devices was in general much influenced by clock-, reset-, and power supply-line length, little influenced by data-line length. Further the line length was increased, the malfunction threshold was decreased as expected, because more energy couples to the devices. The surfaces of the destroyed microcontroller devices were removed and the chip conditions were investigated with microscope. The microscopic analysis of the damaged devices showed component and bondwire destructions such as breakthroughs and melting due to thermal effects.

• Structural Engineering and Mechanics
• /
• v.3 no.6
• /
• pp.541-553
• /
• 1995

The determination of the stress intensity factors is investigated by using the surface integral defined around the crack tip of the structure. In this work, the integral method is derived naturally from the standard path integral J. But the use of the surface integral is also extended to the case where body forces act. Computer program for obtaining the stress intensity factors $K_I$ and $K_{II}$ is developed, which prepares input variables from the result of the conventional finite element analysis. This paper provides a parabolic smooth curve function. By the use of the function and conventional element meshes in which the aspect ratio (element length at the crack tip/crack length) is about 25 percent, relatively accurate $K_I$ and K_{II}$ values can be obtained for the outer integral radius ranging from 1/3 to 1 of the crack length and for inner one zero.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.56-59
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.9-16
• /
• 2007

The purpose of this study was to analyze the effects of after aquatic exercise on gait in the Falls Experienced elderly. There were one group : Fall Experienced Elderly Women(n=8). They were tested on their gait (Elapse time of each phase, Stance time of limb, Stride length, Velocity of segment). we took video and analyzed their movement using Ariel Performance Analysis System and compared gait parameters. For data analysis, mean and standard deviation scores were calculated, and correspondence sample t-test and pearson's correlation analysis were used. First, after exercise is short than before exercise on Elapse time of each phase, fall-experience subjects showed meaningful total time. Second, after exercise is short than before exercise on Stance time of limb and Stride length, fall-experience subjects showed meaningful Stride length. Third, after exercise is fast than before exercise on Velocity of segment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.5
• /
• pp.852-859
• /
• 1996

The factors and mechanism of arm surface changes were analyzed by regression analysis for the relationship between changes in arm joint angle and arm surface changes, according to the direction of upper extremity motion. Body surface change patterns among subjects were tested also. Experiments were carried out on 3 female subjects of different body types to examine 26 motions in 4 directions for 4 upper extremity parts. The major conclusions of the study are as follows: 1. The expansion or contraction of arm surface length depends on the direction of upper extremity motion. 2. Arm surface length changes by linear expansion or contraction according to the joint angle of the direction of motion. The mechanism of arm surface changes is represented by a linear relation between arm surface changes and the (actors of the direction of upper extremity motion and arm joint angle. 3. Arm surface length shows the same pattern of body surface changes regardless of body type. A quantitative model of body surface changes at upper extremity should be developed for functional sleeve design.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.1
• /
• pp.37-46
• /
• 1985

The study is undertaken to utilize the computer in pattern making for women. The automation by the use of computer provides the higher accuracy and efficiency in pattern making. GIGI Graphic Terminal is used for pattern making. The results are as follows: 1. Basic points which can be connected to depict basic pattern are represented on the X-Y co-ordinates. 2. Body measurements for bodice and sleeve pattern are as follows: For bodice pattern: center back waist length, bust girth, and shoulder width. For sleeve pattern: arm hole length, wrist girth, and sleeve length. 3. Grading of standard size was accomplished by using same method.