• Computers and Concrete
• /
• v.12 no.2
• /
• pp.187-209
• /
• 2013

This paper presents a study on the prediction of transfer length of 13 mm seven-wire prestressing steel strand in pretensioned prestressed concrete members with rectangular cross-section including several material properties and design and manufacture parameters. To this end, a carefully selected database consisting of 207 different cases coming from 18 different sources spanning a variety of practical transfer length prediction situations was compiled. 16 single input features and 5 combined input features are analyzed. A widely used feedforward neural regression model was considered as a representative of several machine learning methods that have already been used in the engineering field. Classical multiple linear regression was also considered in order to comparatively assess performance and robustness in this context. The results show that the implemented model has good prediction and generalization capacity when it is used on large input data sets of practical interest from the engineering point of view. In particular, a neural model is proposed -using only 4 hidden units and 10 input variables-which significantly reduces in 30% and 60% the errors in transfer length prediction when using standard linear regression or fixed formulas, respectively.

• Journal of the Korean Home Economics Association
• /
• v.11 no.1
• /
• pp.14-25
• /
• 1973

The measurements includings 22 items such as height, weight, body width were carried out for Korean male and female students, one hundred each, from 18 to 24 years old. The correlation coefficient was calculated for every two items. The values are basic for the Clothing construction and the Pattern grading. The results are as follows : 1) The measuring values are as shown in Table 1 and the index are as shown in Table 2. 2) The correlation coefficient of length to length is larger than that of length to girth and that of length to width. The correlation coefficient of girth to girth is larger than girth to length and that of girth to width. The correlation coefficient of width to width does not show remarkable difference from those of others. 3) The correlation coefficient values of weight to lengths, weight to lengths, weight to girths and weight to width are larger. Among these, the correlation coefficient of weight to girths is the largest. 4) The correlation coefficient in general shows almost positive values except a few exception showing negative values. 5) No meaning differences are found between males and females.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.111-119
• /
• 1994

In this paper we propose a reversible image coding methods with progressive build-up function by bit-plane of multi-lavel image. Firstly, the differencial conversion is applied to reduce the entropy of source images. Then the bit-plane sequences of converted images are coded by means of the newly designed VFRL(Variable to Fixed Run-Llength) code and the RDHC(Run-length Dynamic Huffman Coding). We aim to the simple construction to reduce the complexity. The computer simulated results show that the proposed methods are very effective to the multi-level digital images. For "GIRL" and "COUPLE" of 1EEE monochromatic standard images, the compressibility are superior to the results obtained by the well-known universal codes.own universal codes.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.2 s.32
• /
• pp.51-57
• /
• 1999

In this study, one side fillet welded T-joint, used in box type girder and other welding structure, was investigated by stress analysis and bending fatigue test without edge preparation, with variation of joint shape. The purpose of this study is to give the welding condiltion and design standard on manufacturing one side fillet welded T-joint. As a result, the following conclusions were obtained. 1) In one side fillet welded T-joint, the larger the leg length and the penetration depth, the greater the bending fatigue strength because reduction of stress and strain on toe and root. The increase of the longitudinal leg length rather than vertical leg length contributed to the increase in bending fatigue strength. 2) In one side fillet welded T-joint without edge preparation, both general manual welding and general automatic welding were carried out with same condition. In this case, automatic welding showed deeper penetration and more increased longitudinal leg length than manual welding, so that automatic welding offers greater bending fatigue strength. 3) For one side fillet welded T-joint without edge preparation with automatic welding, the ratio(h/t) of the leg length(h) and the main plate thickness(t) in which toe crake can occur was 1.0 over.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.640-647
• /
• 2004

In order to perform elastic-plastic fracture mechanical analyses, fracture resistance curves for concerned materials are required. The unloading compliance method and the DCPD(Direct Current Potential Drop) method have been widely used for measuring the crack length and the extension for a standard specimen fracture resistance curve test. However it is difficult to apply the unloading compliance method to a real pipe fracture resistance curve test. The objective of this paper is to propose the calibration equation between the normalized crack length and the normalized electric potential, and to apply to pipe fracture experiments. For these, finite element analyses were performed with various current input locations and crack front configurations. Also the 4-point bending jig was manufactured for a pipe test and the DCPD method was used to measure crack extensions and crack lengths for a pipe test. The calculated crack length by the DCPD method agreed with the measured crack length within 5% error.

• Journal of Yeungnam Medical Science
• /
• v.38 no.1
• /
• pp.47-52
• /
• 2021

Background: Short stature is defined as a height below the 3rd percentile or more than two standard deviations below the mean for a given age, sex, and population. There have been inconsistent results regarding craniofacial morphology in short-statured children. This study aimed to analyze the differences between short-statured children with growth hormone deficiency, idiopathic short-statured children, and normal children. Methods: Thirty-one short-statured children with growth hormone deficiency, 32 idiopathic short-statured children, and 32 healthy children were enrolled in this study. The measurements of their craniofacial structures from lateral cephalograms were evaluated. Results: There were statistically significant differences among the three groups seven variables (anterior cranial base length, posterior cranial base length, total cranial base length, upper posterior facial height, posterior total facial height, mandibular ramus length, and overall mandibular length) in the linear measurement and five variables (saddle angle, gonial angle, mandibular plane angle, position of mandible, and maxilla versus mandible) in the angular measurement. Conclusion: Compared to the control group, many linear and angular measurements of the craniofacial structures were significantly different in the two short-statured groups (p <0.05). Treatment plans by orthodontists should include these craniofacial structure characteristics.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.3
• /
• pp.324-330
• /
• 2023

We investigated the relative growth and squamation of larvae and juveniles of cultured Larimichthys polyactis. Analysis of the relative growth of larvae and juveniles showed that their preanal length, head length, eye diameter, body depth, and snout length increased with growth. There was no significant chage in the relative growth. The ratio of preanus length to standard length (SL) increased rapidly until SL was approximately 12 mm, and then increased gradually. Cycloid scales first appeared on the lateral line, progressed to the abdominal cavity at 15.13 mm SL, and expanded to the occipital region, base of pectoral fin, and ventral region of the eye at 17.82 mm SL. At 18.03 mm SL, scales formed on the cheek, and those at the base of pectoral fin and in the abdominal cavity were connected to each other. At 19.06 mm SL, major part of the head was covered by scales, except near the lower jaw. Cycloid scales on the lateral line changed to ctenoid scales at the range of 31.71-32.24 mm SL, and those on the nape changed at the range of 69.02-70.84 mm SL. Our results may help to establish conservation and management strategy for Larimichthys polyactis aquaculture.

• Korean Journal of Ichthyology
• /
• v.5 no.1
• /
• pp.96-112
• /
• 1993

The morphological characteristics of chum salmon Oncorhynchus keta, masou salmon. Oncorhynchus masou and rainbow trout, Oncorhynchus mykiss in Korea were studied from 1989 to 1990. It was found that 13 factors of the female and 11 factors of the male in body form, number of pyloric ceaca and gill rakers has significant specific differences. There were some differences among species in the ratios of body depth, caudal peduncle depth, dorsal fin length and anal fin length to standard length (PBL), and snout length, eye diameter, upper jaw length, and cheek to head length. In the ratio of head length to fork length of the male, chum salmon showed the highest(24.7%) value and rainbow trout the lowest(21.6%). No difference was found in the female. It was proved that number of vertebrae, gill rakers, pyloric ceaca and lateral line scales were useful taxonomical characteristics of the salmon species. In particular, the ratio of eye diameter (ED) to head length (HL) appeared to be a new taxonomic criterion for the salmons in Korean waters.

• Journal of the Korean Society of Costume
• /
• v.56 no.7 s.107
• /
• pp.33-45
• /
• 2006

This study was to provide the fundamental data for a scientific and rational clothing construction by investigating the length variation of the upper arm surface, using the method of surgical tape, and to understand the expansion and contraction of parts of body for the making of clothing adaptable to movement. The subjects were li early elementary schoolgirls in Busan area classified with three somatotypes, and arm-movements consisted of 6 types. The statistical analyses used in this study were mean, standard deviation and the ANOVA and LSD procedure. The results of the analysis of the length of the upper arm surface are as follows: By arm-movements, in the items of horizontal, upper arm length changed more in the front than in the back, and in the items of vertical, represented the opposite of horizontal items. In the items of upper arm, the anterior-posterior axilla length and under arm length were influenced by arm-movements, and the under length of the upper arm represented the maximum rate increase of 74.59%(3.20cm)$\sim$138.72%(4.28cm). In the somatotypes of early elementary schoolgirls, type II was more influenced by arm-movements, and for the making of clothing adaptable to movement, type III needed to reflect more surplus length(2cm) than the other types.

• Journal of the Korean Society of Costume
• /
• v.50 no.3
• /
• pp.87-104
• /
• 2000

The women's apparel sizing system, currently used in the Korean industry, does not reflect measurement differences associated with varying body types and age. Forty five body meaqsurements were taken on 560 subjects, whoes eages ranged from 18-24. STatistical analysis of the data was coducted by using frequences, crosstables, correlation, oneway ANOVA, Regressio analysis. The results of this study were as follow. 1. Average height of women in their early 20's is 160cm, average bust girth 82cm, average hip girth 90cm and average drop 809. The correlation between height and grth items were low and the correlation of length items in the superior and inferior body were shown to bo high respectively. 2. The average Rhrer index is 1.28 and they ussually seem to be in the thin and standard body group. 3. body types were divided by differences between hip and bust sizes. N type(medium hip), A type (large hip), H type(small hip). A classification by body type showed that N type made up 58% while a type made up 24%. 4. The garment sizes for women in their early 20's were developed. 5. The new basic blocks and garment sizes for women in their early 20's were developed as follows : Bust girth (1/2) = 76N, 76A, 79A type($\frac{1}{2}$B+ 4cm) 79N type($\frac{1}{2}$B+ 3.5cm) 82N, 85N type ($\frac{1}{2}$B +3cm) Hip girth($\frac{1}{2}$) =N type($\frac{1}{2}$H + 2~2.5cm) Atype($\frac{1}{2}$H +1.5~2cm) Waist girth($\frac{1}{2}$)=$\frac{1}{2}$W + 2-3cm Back length =extimated measure -0.5cm Front length=76A, N (Back length + 2.2cm) 79A, N(back length +2.7cm) 82N(Back length +3.2cm) 85N(Back length + 3.7cm) Sleeve length=Sleeve length +3cm.