• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.146-152
• /
• 2010

Recently, the applied frequency of composite materials was increased from the viewpoint of lightweight, high strength and low cost when a leisure boat and a fishing boatwere built. However, studies on the mechanical properties of composite material with ship are rare. Specially, a leisure boat and fishing boat with FRP had been built by hand lay-up method. However, the vacuum infusion method is rising recently for ship building. The manufactured these FRP plates were combined by using the adhesive. Therefore, in this study Cleavage peel strength, Shear strength and fatigue limit of adhesive bonds by tensileloading were estimated. From test results, the strengths of FRP specimens made by the vacuum infusion method are higher than that of the hand lay-up method.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.1-6
• /
• 2013

A 25ft class fishing leisure boat is developed, and the resistance performances are investigated by a model test in a high-speed circulating water channel. The design speed of the developed ship is 25 knots using a 150 ps outboard engine. A catamanan type hull form using a planing section is adopted considering the Froude number and large deck area. The effect of a center body attached on the bottom of the cross deck is studied under various conditions. Wave patterns are observed to make clear the relationship between the resistance performance and the wave characteristics. The results show that the shape of the center body and the position of the chine line can have a strong effect on the resistance performance in a certain velocity range.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.1
• /
• pp.14-24
• /
• 2013

The marine leisure industry in Korea has been the focus of the power of economic growth and the creation of jobs in recent years. In this regard, many studies concerning marine leisure are on-going in various fields. In this paper, developed a layout system and algorithm can resolve the factory and facility layout problem. For a layout design of leisure-boat factories, the leisure-boat production process is analyzed in order to derive standard production space elements for the layout of the factory. Based on the results, a draft design of the factory layout is carried out based on the manpower planning data, as well as the characteristics and relationships of each process data. A layout design of this paper can be verified through a factory simulation solution and we suggest the verification method using a SBD(simulation based design) methodology. The layout system takes into account the user's accessibility and extendibility, so it is web-oriented and uses RIA (rich Internet Application) technology. Furthermore, the system and layout algorithm of this paper are verified with samples data that show the efficient factory arrangement and practical application method.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.605-613
• /
• 2014

The purpose of this study is studying the relationship among experience choice, experience effect and experience satisfaction of marine leisure sports for the vitalization of marine leisure tourism. After preparing a questionnaire, investigation and analysis were done by visiting Boryeong area. The result of the study is as following. First, it was found that the major cause of choice in marine leisure sports has positive impact on choice satisfaction. Second, it was found that the major cause of choice has positive impact on experience effect. Third, it was found that the choice satisfaction in marine leisure sports has positive impact on experience effect. Fourth, it wa s found that the marine leisure sports visitors like motor boat, banana boat and yacht experience. Fifth, it is suggested that an equipment rental desk, safety facilities and marine leisure experience facility included in a marine leisure experience center to be built.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.3
• /
• pp.329-336
• /
• 2006

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.213-215
• /
• 2004

Water jet propulsion system has high efficiency on middle to high speed, and it provides better safety than conventional screw propeller because it has not projected propeller and rudder. So many leisure boat and high-speed ferries use this propulsion system. We developed water-jet propulsion unit for small planning boat, and launched that in the boat, after that we tested water-jet unit in the lake. As a result, we certify heat dissipation at the bearing housing and reverse duct's shape for neutral position are important at the design, and alignment water-jet unit and keel line are important at the launching, and ship's resistance performance and jet's propulsion performance also are needed to consideration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.232-234
• /
• 2012

NMEA2000 international standards was developed for real-time communication among sensors and devices in ships. This paper describes analysis of NMEA2000 network protocols and implementation of a gateway for wireless data services in NMEA2000 networks. For scalability of the network, developed gateway didn't participate in NMEA2000 network but simply relayed data between wireless devices and the network.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.112-118
• /
• 2013

This paper reports the results of a comparative study on rudder performance between the steel rudders that have been used in coastal angling fishing boats in the 20-GT class and the newly developed FRP composite material rudders. In order to compare the rudder performances of these two types, a sea trial test was carried out to investigate the speed performance, fuel consumption, and ship's turning ability. The results showed that the sea trial performance of the FRP composite rudder was better than that of the steel rudder type in terms of the sea speed, fuel consumption rate, and turning ability.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.4
• /
• pp.84-89
• /
• 2008

It is hard to find experimental data for a model test of small high-speed planning boats. It is difficult to verify the performance seen in a model test for a high-speed boat because the ship-model scale-ratio is very small and the flow velocity of the circulating water channel and the X-carriage speed of the towing tank are restricted. Therefore most hull-form designs for high-speed small boats depend on the sea-trial test result for similar boats or evaluation through numerical calculations. This study investigated the anti-rolling effect of the stern sub-body in a 50-knot doss planning boat. To carry out this work, new model test procedures were set up in the actual sea. Using this method, the anti-rolling effect of the stern sub-body was investigated. A stern sub-body attached to a planning boat was proved to be effective in reducing the roll and pitch angle.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.2
• /
• pp.108-114
• /
• 2016

Recently, there has been a growing interest in marine leisure sports and high speed power boat for fishing. The prototype of 20 feet class power boat was developed and authors are joined in this government-led project. The research was performed to evaluate the optimal structure and design of the structural strength necessary to ensure the structural safety of the power boat. A new material ROCICORE fiber added to the mat and roving was adopted for high-power tenacity. ANSYS Workbench has been used to make the structural model, evaluate the strength and optimize the structural design. The response of the structure to quasi-static slamming loads according to the rules and regulations of ISO 12215-5, Lloyd’s Register of Shipping and Korean Register has been implemented and studied. An optimization study for the structural response is carried out by changing the plate thickness and section modulus of stiffeners. The power boat structure derived fuel efficiency is optimized by performing the best possible structural design to minimize the hull weight.