• Journal of Welding and Joining
• /
• v.16 no.5
• /
• pp.134-141
• /
• 1998

In this study, a fillet size for bending fatigue strength of one side fillet welded T-joint, used in box type girder and other welding structure, was investigated by bending fatigue test with or without edge preparation and burn through, with variation of joint shape. As a result, the following conclusions were obtained. (1) In one side fillet welded T-joint, the larger the leg length, the greater the bending fatigue strength. The increase in bending fatigue strength. (2) One side filet welded T-joint with edge preparation showed higher bending fatigue strength than that with twofold-large leg length and without edge preparation. (3) In one side fillet welded T-joint without edge preparation, both manual welding and automatic welding were carried out with same condition. In this case, automatic welding shoed deeper penetration and more increased horizontal leg length than manual welding, so that automatic welding offers grater bending fatigue strength. (4) For one side fillet welded T-joint without edge preparation, the ratio(h/t) of the leg length (h) and the main plate thickness (t) in which toe crack can occur was 1.2 over. (5) In one side fillet welded T-joint with edge preparation, the burn through led to reduced bending fatigue strength. However, this bending fatigue strength was higher than that of one side fillet welded T-joint without edge preparation and with a larger leg length.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.320-320
• /
• 2010

In the case of existing ultrasonic motors, they have characteristics such as outstanding response speed, speed and high efficiency. However, it's very hard to use practically them as small motors due to complicated structure and expensive cost. This paper proposed v-type ultrasonic linear motor. Stator of the motor is composed of thin elastic body and four ceramics attached to upper and bottom areas of the body. The ceramics have each direction of polarization. When two harmonic voltages which had $90^{\circ}$ phase difference were applied to the ceramics, the symmetric and anti-symmetric displacements were generated at the tip to make the elliptical motion. To find out a model that generates maximum displacement at contact tip, FEM program was used with change of leg-angle. In addition, optimal model was chosen by considering magnitude and shape of displacement according to change of frequency.

• The Research Journal of the Costume Culture
• /
• v.26 no.1
• /
• pp.95-108
• /
• 2018

This study analyzed the body shape of the body of 17~19 years old female students using the SPSS 20.0 statistical program according to the 7th Korea Human Body Survey. Factor analysis was based on six factors including body size, body height, shoulder length, and width, upper body length, hip length, and shoulder inclination related factors. Through this cluster analysis, the body shape of late adolescent female student was classified into four types. Body type 1 was the highest body height factor, and the upper body length and the hip length factor were lower. It was analyzed as 'Long leg in the body'. Body type 2 is the 'narrow shoulder skinny type' with high hip and shoulder slope factors and low body size, body height, shoulder length, and width factor. Body type 3 showed body size, shoulder length, height and hip length factor, and body height factor was rather low 'low hip obese body shape'. Body type 4 was analyzed as 'lower shoulder long upper body type' with higher upper body length factor and lower body size and shoulder slope factor. It is thought that when the pattern is made, it is possible to produce excellent patterns by fitting the dimensions of the body, as well as the dimensions of the shoulder width, the slope, and the hip length.

• Journal of the Korean Society of Costume
• /
• v.51 no.5
• /
• pp.5-16
• /
• 2001

The purpose of the study was to investigate the body cathexis, ideal body shape, clothing satisfaction and their interrelationships. The subjects were 445 middle- and high- school girls. The findings were as follows : the subjects were more satisfied with their face appearance than body parts. They were very unsatisfied with thigh. leg and weight. Generally they were more satisfied with upper body than lower body, and more satisfied with length measurements than girth measurements. They accepted 169.19cm as ideal height and 49.18kg as ideal weight. The middle-school girls wanted to be taller than high-school girls by 3cm. But the ideal weight of both were almost same. The Rohrer indices indicated that the subjects were normal to slender type. But the Rohrer indices calculated using ideal height and ideal weight showed that the subjects thought extremely slender type as ideal body shape. The attitude of body was evaluated by two factors. the awareness of body shape and the physical attractiveness. The awareness of body shape was deeply influenced by girth measurements and lower body parts. And physical attractiveness was severely affected by face appearance. Weight was more important than height in regard to body cathexis. The ideal body shape was independent of individual situation but was formed by social value. The satisfaction of clothing in terms of design related aspects was influenced by body cathexis. Also the more satisfied with their body. the more they felt comfortable for their clothing. The body cathexis was interrelated with the satisfaction of clothing in some aspects.

• The Korean Fashion and Textile Research Journal
• /
• v.1 no.2
• /
• pp.127-136
• /
• 1999

The purpose of this research was to investigate the difference between perceptions of the nude body and of the clothed body as measured by body cathexis scale. Subjects were 274 college male and female between 20~30 yrs. Data were analyzed by using frequency, T test, cluster analysis, Duncan test by using Spss for window 8.0 PC program. Significant difference were found between mean scores of male and female on the nude body cathexis (NBC) and clothed body cathexis (CBC) Scales for hair texture, hair color, face, face color, shape of head, eye, lips, forehead, back, trunk, waist, bust, leg of shape, chest, hip. On the difference between male and female, significant differences were found between NBC and CBC scales for all body parts except hair texture, face color, ears, eyes, teech. Male had higher satisfaction than female in both body cathexis. The taller men, the higher body satisfaction with face shape, body shape, height in both body cathexis. Before appearence management, the bigger men, the higher body satisfaction with musle, waist, height, chest, body shape in both body cathexis. Male had higher satisfaction than female in both body cathexis. The taller women, the higher body satisfaction with neck, body shape, height in before appearence management. The bigger women, the higher body satisfaction with heights, weight distributions, waist, height in both.

• Animal Systematics, Evolution and Diversity
• /
• v.15 no.1
• /
• pp.67-74
• /
• 1999

Peltidium quinquesetosum n. sp. belonging to the family Peltidiidae is described from algal bed on subtidal rocky bottoms of Korea. The most characteristic features of this species are found in the setal number of distal segment of leg 1 endopod and the shape of leg 5 in female, and the caudal rami fully concealed by urosome in a dorsal view.

• Animal Systematics, Evolution and Diversity
• /
• v.11 no.3
• /
• pp.379-388
• /
• 1995

Two marine harpacticoid copepods are newly recorded from Korea : Eudactylopus specitabilis (Brian, 1923) and E. andrewi Sewell , 1940. Six species are currently recognized in the genus Eudactylopus, multitidue of which were often disputed among authors on their taxonomic status, so we treat here the taxonomic features of the two species above on the basis of specimens from South Sea and East Sea of Korea. E.spectabilis occurred first outside the Mediterranean Sea. and is fully redescribed with illustrations. Important male characters like the shape of leg 2 endopod and leg 5 with its setal arrangement are particularly emphasized as the diagnostic characters.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.2
• /
• pp.141-148
• /
• 2012

This paper proposes fault tolerant gaits of a quadruped robot with feet of flat shape. Fault tolerant gaits make it possible for a legged robot to continue static walking against a leg failure. In the previous researches, it was assumed that a legged robot had feet that have point contact with the surface. When the robot is endowed with feet having flat shape, fault tolerant gaits can show better performance compared with the former gaits, especially in terms of the stride length and gait stability. In this paper, fault tolerant gaits of a quadruped robot against a locked joint failure are addressed in straight-line motion and crab walking, respectively.

• Journal of Fashion Business
• /
• v.20 no.3
• /
• pp.17-29
• /
• 2016

To develop baseball catcher leg guards, 3-dimensional (3D) methodologies, which are 3D human body data, reverse engineering, modeling, and printing, optimized guard design for representative positions. Optimization was based on analysis of 3D body surface data and subjective evaluation using 3D printing products. Reverse engineering was used for analysis and modeling based on data in three postures: standing, $90^{\circ}$ knee flexion, and $120^{\circ}$ knee flexion. During knee flexion, vertical skin length increased, with the thigh and knee larger in anterior area compared to the horizontal dimension. Moreover, $120^{\circ}$ knee flexion posture had a high radius of curvature in knee movement. Therefore, guard designs were based on increasing rates of skin deformation and numerical values of radius of curvature. Guards were designed with 3-part zoning at the thigh, knee, and shin. Guards 1 and 2 had thigh and knee boundaries allowing vertical skin length deformation because the shape of thigh and knee significantly affects to its performance. Guard 2 was designed with a narrower thigh and wider knee area than guard 1. The guards were manufactured as full-scale products on a 3D printer. Both guards fit better in sitting than standing position, and guard 2 received better evaluations than guard 1. Additional modifications were made and an optimized version (guard 3) was tested. Guard 3 showed the best fit. A design approach based on 3D data effectively determines best fitting leg guards, and 3D printing technology can customize guard design through immediate feedback from a customer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.1-16
• /
• 2021

This study classified short adult male body types and identified characteristics by body type according to Size Korea's 7th human system measurement data for men in their 20s to 60s. There were four body types for short adult males. Type 1 was a 'short bird legs-normal body shape' with an average body size, low body height, short torso length, thin legs, and no sagging shoulders. Type 2 was a 'short torso thin body' with a small body size, a slim body, a high body height, a short torso length and no sagging shoulders. Type 3 was a 'thick leg-overweight body shape' with a large body size, thick legs, low body height, small shoulder length and obesity. Type 4 was a 'long bird legs-normal body' with a normal body size, high body height, thin legs, long torso and sagging shoulders. The development of clothing design and pattern reflecting the body shape characteristics of short adult males should be improved to fit clothing and suitability. It is necessary to increase the satisfaction of ready-to-wear for consumers with various body types by adding the size for shorter men through a subdivision of the ready-made size system.