• Animal cells and systems
• /
• v.2 no.3
• /
• pp.323-331
• /
• 1998

Three new marine heterotardigrades, Archechiniscus symbalanus, and Styraconyx craticuliformis of the family Halechiniscidae and Echiniscoides andamanensis of the family Echiniscoididae, are reported on the basis of the specimens sieved from intertidal barnacles in the Thai coast of the Andaman Sea. Archechinisos symbalanus n. sp. is related to Archehiniscus minutus Grimaldi De Zio and D'Addabbo Gallo, but discernible from it by possessing median cirrus, stylet sheath, sensory spine of leg l, prominent basal processes on all leg pairs, and S-shaped seminal receptacles. Styraconyx craticuliformis n. sp. is similar to S. craticulus (Pollock) in bearing the grid-like dorsal cuticle, but distinguished from it by the shape of claws and cirrophore of primary clava. Ediniscoides andamanensis n. sp. is rebated to Echiniscoides pollocki Hallas and Kristensen and E. sigismundi sigismundi (M. Schultze) in sharing the same patterns of sensory leg appendages and the claw configuration of 8-8-8-7, but characterized by the shape of cirri, pharyngeal apparatus and female gonopore.

• Journal of fish pathology
• /
• v.32 no.2
• /
• pp.123-127
• /
• 2019

In this study, white spots appearing in carapace of imported white leg shrimp Litopenaeus vannamei were observed by macroscopic and microscopic examination. White spots due to white spot disease showed two types, white spots with a regular circular shape ranging from 0.4 mm to 1.7 mm and white spots with an irregular shape ranging from 0.05 mm to 2 mm. White spots due to other causes showed four types that appeared as crystalized materials in range of 100 ㎛ around the tegumental gland, as polygonal inorganic deposits ranging from 58 ㎛ to 188 ㎛, as Linear inorganic deposits ranging from 0.8 mm to 9 mm, as brownish spots ranging from 0.1 mm to 0.4 mm, and brownish spots containing melanin ranging from 0.1 mm to 2 mm. As a result, white spots occurred in imported white leg shrimp Litopenaeus vannamei were divide two type, due to white spot disease or other causes, for quarantine works.

• Journal of the Korea Furniture Society
• /
• v.21 no.2
• /
• pp.167-187
• /
• 2010

In this paper, the research is carried out about a couch, a horse foot chair, a horse foot table, and a multi-leg table among the furniture of Koguryeo. The couch had been widely used from the Chinese Han Dynasty, and the couch of the Koguryeo was influenced by that of Han. The couch of Koguryeo was a piece of furniture which was used not only for sitting purposes but also for symbolizing status ranking. The horse foot chair is a chair whose leg is finished with a horse foot shape, and is a relic which shows an aspect of the art exchange between the East and the West, appearing in Egypt and Mesopotamia, having influence on chairs of Greece and Rome, and being introduced into Koguryeo and Japan by way of the countries bordering on Western China and China. The horse foot chair was used by the royalty, the aristocracy and the priesthood, and use of the chair at that time reflects the effect of Buddhist culture. The horse foot table is a piece of furniture whose leg is finished with a horse foot shape as in the horse foot chair, and there are many instances that it is used together with the horse foot chair. The multi-leg table is configured to have a square plate, plural legs and footstool, and is used by the upper classes, being also influenced by China. In this paper, the study about the furniture of Koguryeo, which has not been closely considered up to now, is performed, and is important as a study about origin of Korean furniture. In the future, the research about succession of the furniture of Koguryo to that of Koryeo period should be carried out, and much more research material be investigated.

• Journal of Welding and Joining
• /
• v.21 no.3
• /
• pp.40-45
• /
• 2003

The high-speed rotating arc process forms a flat bead surface with decreased penetration depth because the molten droplets are deflected by centrifugal force. Therefore the rotating arc welding for horizontal fillet welding increases the leg length with the increase of rotation frequency and prevents the deflection of weld bead and overlap. In this study, the relationship between the welding parameters and the weld bead shape - leg length and undercut - are investigated experimentally. Consequently, the weld quality could be improved by rotating arc welding, and sound weld bead was achieved when applied to horizontal fillet welding with 4mm gap by avoiding the undercut which is inevitable for the conventional GMA welding methods.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.256-261
• /
• 2016

In this paper, Shape optimal design for a chair with 4 legs and 2 stretchers consisting of stainless steel was conducted. The shape was transformed by identifying stress and deformation for the part of leg and stretcher. In addition, load condition and mesh was designed using Hypermesh. The stress analysis was carried out using CSD_Elast that is one of EDISON program. In seat test, Maximum equivalent stress was showed at the contact part between seat and legs. As a result, a leg cross-section with rectangular and arch was designed. And optimal height of stretcher was found to reduce a deformation. Also, maximum deformation was reduced by designing a stretcher with ellipse cross-section. So, Optimal chair having 4 legs with rectangular cross section and 2 stretchers with ellipse cross section was shown to satisfy the safety ratio.

• Korean Journal of Human Ecology
• /
• v.24 no.4
• /
• pp.555-569
• /
• 2015

During a design process of a protective equipment for sports activities, minimizing movement restrictions is important for enhancing its functions particularly for protection. This study presents a three-dimensional(3D) modeling methodology for designing baseball catcher's leg guards that will allow maximum possible performance, while providing necessary protection. 3D scanning is performed on three positions frequently used by a catcher during the course of a game by putting markings on the subject's legs at 3cm intervals : a standing, a half squat with knees bent to 90 degrees and 120 degrees of knee flexion. Using data obtained from the 3D scan, we analyzed the changes in skin length, radii of curvatures, and cross-sectional shapes, depending on the degree of knee flexion. The results of the analysis were used to decide an on the ideal segmentation of the leg guards by modeling posture. Knee flexions to 90 degrees and to $120^{\circ}$ induced lengthwise extensions than a standing. In particular, the vertical length from the center of the leg increases to a substantially higher degree when compared to those increased from the inner and the outer side of the leg. The degree of extension is varied by positions. Therefore, the leg guards are segmented at points where the rate of increase changed. It resulted in a three-part segmentation of the leg guards at the thigh, the knee, and the shin. Since the 120 degree knee-flexion posture can accommodate other positions as well, the related 3D data are used for modeling Leg Guard (A) with the loft method. At the same time, Leg Guard (B) was modeled with two-part segmentation without separating the knee and the shin as in existing products. A biomechanical analysis of the new design is performed by simulating a 3D dynamic analysis. The analysis revealed that the three-part type (A) leg guards required less energy from the human body than the two-part type (B).

• Journal of Ocean Engineering and Technology
• /
• v.13 no.2 s.32
• /
• pp.51-57
• /
• 1999

In this study, one side fillet welded T-joint, used in box type girder and other welding structure, was investigated by stress analysis and bending fatigue test without edge preparation, with variation of joint shape. The purpose of this study is to give the welding condiltion and design standard on manufacturing one side fillet welded T-joint. As a result, the following conclusions were obtained. 1) In one side fillet welded T-joint, the larger the leg length and the penetration depth, the greater the bending fatigue strength because reduction of stress and strain on toe and root. The increase of the longitudinal leg length rather than vertical leg length contributed to the increase in bending fatigue strength. 2) In one side fillet welded T-joint without edge preparation, both general manual welding and general automatic welding were carried out with same condition. In this case, automatic welding showed deeper penetration and more increased longitudinal leg length than manual welding, so that automatic welding offers greater bending fatigue strength. 3) For one side fillet welded T-joint without edge preparation with automatic welding, the ratio(h/t) of the leg length(h) and the main plate thickness(t) in which toe crake can occur was 1.0 over.

• Animal cells and systems
• /
• v.11 no.1
• /
• pp.69-77
• /
• 2007

Both sexes of a new species of Miraciidae belonging to the genus Amonardia Lang, 1948 are described. All materials collected from the cultivated brown alga, Undaria pinnatifida of Gijang, Korea. So far only one species, A. normani (Brady, 1872) from the algal bed at Jindo Island was recorded in Korea. The new species can easily be distinguished from its congeners by the combination of characters as follows: (1) shape of first antennular segment in female, (2) setal formular of mandible and maxillule, (3) setae of female sixth leg in female, and (4) shape of P2 endopod and exopod of fifth leg in male.

• The Korean Fashion and Textile Research Journal
• /
• v.19 no.4
• /
• pp.479-485
• /
• 2017

This study provides basic indices for the development of a pet dog's dummy. Surveys were conducted with 71 owners of small dogs weighing under 10kg as preliminary research for information on pet dogs, uses and complaints about their clothes and demographic information to investigate wearing conditions. We collected pictures of 30 products sold in 12 brands at home and abroad to analyze size, materials, and patterns and investigate the actual production conditions. The survey results on wearing conditions indicated that 'Maltese' was the breed most often raised in households. Dogs weighing 'between 3kg and 4kg' were most common. Dogs under five years of age took up 53.5%. Most of the clothes were 'S' size, followed by 'M' and 'L' Most responded, 'The overall size does not fit' as an inconvenience when worn for long. Second, most brands developed products in three sizes. The displayed details included neck and chest circumference, back length and dummy height. Cotton and artificial leather were used most often for the outer fabric, cotton for the internal filling along with wire and aluminum for some products to maintain shape and motions. Most dummies consisted of back+outer leg, belly, inner leg and sole. Sometimes, a composition line was added by the chest shape, and an incision was placed between the body and leg for breeds with thick legs. Most patterns had a composition line in the leg connected from the belly.

• Journal of the Korean Society of Costume
• /
• v.59 no.8
• /
• pp.123-131
• /
• 2009

This study aims at presenting the basic data related to the somatotype of elderly men at the point of Korea's entering into an aging society. Efforts were made to classify the lower-half somatotype of elderly men, with the application of the measurements of 261 elderly men of 60 years of age and over up to 70, which were available from the physique measurement survey project for Koreans. The number of analysis items was 31. The statistical treatment was made through SPSS win 12.0 program, and the analytical methods used were the basic statistics, factor analysis, and cluster analysis. The findings are as follows: Elderly men experienced the decreases in height and weight, in comparison with middle-aged ones, while they showed a flat shape at trunk, with more protruded waist and abdomen and with flat buttock. The analysis of the constituting factors for the lower-half body of elderly men resulted in the 6 items. The elements constituting the lower-half body of elderly men included the shape from waist to hip, the spread of hip and height of knee, the shape of leg, thigh size, the length of leg, and the volume of abdominal. The total accountability was 81.59 %. The cluster analysis for lower-half somatotype of elderly men resulted in the classification of three types. The above findings are intended to assist the designing of ready-made slacks with a high level of fitness for elderly men.