• Journal of Fashion Business
• /
• v.20 no.3
• /
• pp.17-29
• /
• 2016

To develop baseball catcher leg guards, 3-dimensional (3D) methodologies, which are 3D human body data, reverse engineering, modeling, and printing, optimized guard design for representative positions. Optimization was based on analysis of 3D body surface data and subjective evaluation using 3D printing products. Reverse engineering was used for analysis and modeling based on data in three postures: standing, $90^{\circ}$ knee flexion, and $120^{\circ}$ knee flexion. During knee flexion, vertical skin length increased, with the thigh and knee larger in anterior area compared to the horizontal dimension. Moreover, $120^{\circ}$ knee flexion posture had a high radius of curvature in knee movement. Therefore, guard designs were based on increasing rates of skin deformation and numerical values of radius of curvature. Guards were designed with 3-part zoning at the thigh, knee, and shin. Guards 1 and 2 had thigh and knee boundaries allowing vertical skin length deformation because the shape of thigh and knee significantly affects to its performance. Guard 2 was designed with a narrower thigh and wider knee area than guard 1. The guards were manufactured as full-scale products on a 3D printer. Both guards fit better in sitting than standing position, and guard 2 received better evaluations than guard 1. Additional modifications were made and an optimized version (guard 3) was tested. Guard 3 showed the best fit. A design approach based on 3D data effectively determines best fitting leg guards, and 3D printing technology can customize guard design through immediate feedback from a customer.

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.219-225
• /
• 2018

The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.5
• /
• pp.602-614
• /
• 1994

The purpose of this study was to suggest the proper ease of total crotch length concerning both appearance and comfort. The research processes as follows. 1) For the purpose of obtaining the necessary ease of slacks in body movement, experimental slacks of no ease of total crotch length were made. Three college girls putting on these experimental slacks were examined on their back middle waist lines using cross-cut method. 2) Experimental slacks for suggesting the proper ease consist of 7 types; slacks CO, Wl, W3, W5, W7, C3, C5. The sensory evaluation for appearance and comfort was applied to evaluate the 7 slacks. The results can be summarized as follows. 1. As the leg-movement angle increased, the vertical space increased and the horizontal space decreased. There was negative relationship between vertical and horizontal space. And as the leg.movement angle increased, the area of space increased. The shapes of space showed the amounts of space and the direction of force by the movements. 2. The appearances of slacks C3, W3, C5 were better than the other slacks. The eases of the crotch were better than those of the waist line in appearance. And slakcs W7 was better than any other , ;lacks in comfort. When the amount of each part of eases was same, the comfort in eases of crotch was not as good as that of waist line. 3. In slacks, the proper ease of total crotch length was 3% and 5% of total crotch length.

• Physical Therapy Korea
• /
• v.3 no.2
• /
• pp.36-41
• /
• 1996

The purpose of this study was to determine whether the biomechanical variables of the walking patterns of the obese children compared with those of normal children would revealing significant differences. Normal(N=25) and obese(N=19) subjects were screened based on a health record which was examined to eliminate any subjects who had any pathological condition related to their gait. Data for a minimum of 5 repeated walking trials were collected using a stop watch and a tape measure. Basic kinematic analyses yielded data based on the following variables : stride length divided by leg length, and cadence divided by leg length. This measurement data was classified by the Obesity Index calculated from by height, weight data. Results showed no significant difference among normal, obese and subjects(p>.05). Difficulties in formulating the experimental condition and poor equipment quality are thought to be reason for the inconclusive results. Future studies might include medical complications such as tibia vara, genu valgum, other diseases caused by obesity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.5
• /
• pp.640-647
• /
• 2008

Breed differences in adult animals are determined during fetal development. If interventions are to be developed that influence growth of muscle and fat, it is important to know at which time during gestation breed differences appear and are fixed. The objective of this study was to characterize fetal development in cattle of different breeds. Pregnant cows of 4 cattle breeds with different growth impetus and muscularity were slaughtered under normal processing conditions and the fetuses were removed. German Angus, a typical beef cattle; Galloway, a smaller, environmentally resistant beef type; Holstein Friesian, a dairy type; and Belgian Blue, an extreme type for muscle growth were used. Fetuses of each breed were investigated at 3, 6, and 9 mo of gestation. Fetuses were weighed and dissected into carcass, organs, and muscles. Body fat weight was obtained using the Soxhlet extraction method. Fetal weight increased most rapidly in the third trimester of gestation mainly due to the accelerated muscle and fat deposition. The organ weight to body weight (BW) ratios decreased and the muscle and fat weight to BW ratios increased. At 3 mo of gestation, Galloway fetuses had the significantly smallest BW, half-carcass weight, leg weight, organ weight, muscle weight and shortest leg length. In contrast, Holstein fetuses had the significantly greatest BW, liver, kidney, and lung weights and significantly longest leg length among the 4 breeds, but no differences between Holstein Friesian and Belgian Blue were detected in half-carcass and leg weight. Indeed, Belgian Blue fetuses had the significantly greatest half-carcass weight, leg weight, and muscle weight at 9 mo of gestation, and Galloway had a significantly greater body fat to BW ratio than Holstein Friesian and Belgian Blue. These differences were not evident at 3 and 6 mo of gestation. These data show that the profound increase of tissue and organ weights occurred in later gestation in cattle fetuses even though breed differences were evident as early as 3 mo of gestation. Depending on the tissue of interest, impacting fetal growth likely needs to occur early in gestation before the appearance of breed-specific differences.

• International journal of advanced smart convergence
• /
• v.9 no.4
• /
• pp.26-33
• /
• 2020

This study measured the downward stepping movement relative to weight change (no load, and 10%, 20%, 30% of body weight respectively of adult male (n=10) from standardized stair (rise of 0.3 m, tread of 0.29 m, width of 1 m). The 3-dimensional cinematography and ground reaction force were also utilized for analysis of leg stiffness: Peak vertical force, change in stance phase leg length, Torque of whole body, kinematic variables. The strategy heightened the leg stiffness and standardized vertical ground reaction force relative to the added weights (p<.01). Torque showed rather larger rotational force in case of no load, but less in 10% of body weight (p<.05). Similarly angle of hip joint showed most extended in no-load, but most flexed in 10% of body weight (p<.05). Inclined angle of body trunk showed largest range in posterior direction in no-load, but in vertical line nearly relative to added weights (p<.001). Thus the result of the study proved that downward stepping strategy altered from height of 30 cm, regardless of added weight, did not affect velocity and length of lower leg. But added weight contributed to more vertical impulse force and increase of rigidity of whole body than forward rotational torque under condition of altered stepping strategy. In future study, the experimental on effect of weight change and alteration of downward stepping strategy using ankle joint may provide helpful information for development of enhanced program of prevention and rehabilitation on motor performance and injury.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.184-195
• /
• 2017

Baseball is a life sport that gives vitality to people. However, currently available leg guards do not have a variety of sizes and it is very difficult to purchase a leg guard that is suitable for the size of a specific consumer. Therefore, this study investigated the size system of a leg guard sold in the market and suggested a grading deviation suitable for the legs of Korean males. The results of the study were as follows. First, most brands were sold only in three size systems as children's, teenagers, and adults. Adult size systems were not subdivided. Second, Korean male legs were classified into Group 1 (large girth and height and lower body muscle) and Group 2 (small girth and height and low underbody muscle). Third, the size system is based on vertical items such as height and mid-thigh circumference. Each group produced 10 sizes. The smallest height or the largest height was also found to be about 4.5 to 5.0cm smaller or larger than the sample size for each group. The total length of the leg guard was about 2.5cm when the height was increased or decreased by one size. It was confirmed that the deviation of the circumference of the mid-thigh should be about 2.0cm larger or smaller than the sample size even if the height is the same. The deviation of the knee circumference and ankle circumference was smaller than the other circumference. In conclusion, the dimension combinations of the leg guard must be set differently to provide a leg guard with high size suitability according to leg type.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.4
• /
• pp.85-89
• /
• 2021

Background : Klippel-Trenaunay-Weber syndrome (KTS) is a rare congenital medical condition characterized by complex vascular malformation. KTS consists of a classic triad of capillary malformation (hemangioma), venous malformations and bone or soft tissue hypertrophy causing limb asymmetry. The aim of this report is to describe management for gait disturbance and foot pain in a Patient with KTS using custom-made total contact insole. Case presentation : A 32-year-old man with KTS presented with a 3-year history of gait disturbance on hard surface due to right first toe pain and Achilles tendon tightness. The patient had soft tissue hypertrophy, varicose veins and port-wine stains over the right lower limb associated with KTS. True leg length discrepancy was 2 cm. We prescribed custom-made total contact insole to protect his deformed foot and correct leg length discrepancy. The insole of right side included wedge shaped heel lift and the insole of left side included full length lift to add extra support on unaffected side. Also, we provided compression stocking and physiotherapy including manual lymphatic drainage for lymphedema and stretching exercise for tightness in right lower extremity. At 3 years follow-up, postural alignment including pelvic obliquity was improved using a custom-made total contact insole. The degree of scoliosis and foot pain were also reduced. Conclusion : An individualized and multidisciplinary approach is essential regarding the complexity of comorbidities in patients with KTS. For patients with KTS, orthotic management should be considered to prevent and correct deformities related to KTS. Active orthotic management, compression stocking and physiotherapy can enhance the quality of life and function in patients.

• Journal of Welding and Joining
• /
• v.9 no.4
• /
• pp.50-59
• /
• 1991

Large steel water pipes in Korea are joined prevalently by bell end method and welded at inside as well as outside of the pipes with the length of leg which is same as or larger than the thickness of pipes. This results in an excessive consumption of material and labor compared with foreign counturies such as USA, so that in our recent situation of requiring a number of water pipes such consumption is very ineffective and an improvement in weld design of water pipes is urgently necessary. In this experimental study, the possibility of reducing the length of leg to 85% of the pipe thickness was investigated through observations of microstructure and cross section of weldments, the tensile test, and the impact test of the field and laboratory specimens. As the results of this study, it was revealed that water pipes which have the leg of fillet about 0.8xthickness show a good weldability, have a greater strength than the base metal and absorb the enough energy to be safe in the working condition of the pipes.

• Journal of Species Research
• /
• v.11 no.4
• /
• pp.239-252
• /
• 2022

Afrolaophonte koreana sp. nov. is described from the intertidal zone of two sandy beaches on the south coast of Korea. This is the first record of the genus Afrolaophonte Chappuis, 1960 in the Northern Pacific. The new species is most similar to A. aequatorialis Cottarelli and Mura, 1981, described from the Maldives and subsequently also found in Papua New Guinea, but could be distinguished by numerous characters, including the segmentation of the third leg endopod in male, armature formula of the second leg in both sexes, length of caudal rami in both sexes, and length of some setae on the fourth leg in female. Afrolaophonte ensiger Wells and Rao, 1987 from the Andaman and Nicobar Islands is established as a junior subjective synonym of A. aequatorialis. To test previous phylogenetic hypotheses based on intuitive methods, a parsimony based cladistic analysis of 13 valid congeners is performed using 15 morphological characters and one outgroup. Only one of three previously proposed species-groups is supported with a synapomorphy, while one was clearly based on symplesiomorphies. Our current knowledge of morphology in this genus is not sufficient for postulating interspecific phylogenies, which also renders previous zoogeographical hypotheses untestable.