• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.270-277
• /
• 2005

The purpose of this study was to clarify the palatal volume and anterior palatal slope of the children with class II div.1 malocclusion and normal occlusion in mixed dentition(Hellman dental age III A) using three-dimensional laser scanner. Samples were consisted of 31 children with skeletal class II div.1 malocclusion in mixed dentition and 29 children with normal occlusion and profile among the contestants in 2000-2004 Healthy Dentition Contest in Seoul. Totally 60 maxillary study model were taken. Each cast was scanned by three-dimensional laser scanner (Breuckmann opto-TOP HE, INUS, Korea) and shaped into the three-dimension image by Rapidform 2004 program(INUS, Korea). And the palatal volume and anterior palatal slope of each cast were calculated by Rapidform 2004 program(INUS, Korea). The values were statistically compared and evaluated by independent samples t-test with 95% of significance level. The results were as follows: 1. Palatal volume was significantly lesser in children with class II div.1 malocclusion than that of normal occlusion in mixed dentition(p<0.05). 2. No significant difference in the anterior palatal slope and palatal height was found between the children with class II div.1 malocclusion and normal occlusion in mixed dentition(p>0.05). 3. Palatal length was significantly greater in children with class II div.1 malocclusion than that of normal occlusion in mixed dentition(p<0.01). 4. Intercanine and intermolar width were significantly lesser in children with class II div.1 malocclusion than those of normal occlusion in mixed dentition(respectively p<0.05 and p<0.01).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.91-98
• /
• 2007

The aim of this study was to examine the difference of the depth of sedation using the Bispectral index assessment with and without the added submucosal Midazolam to oral Chloral hydrate and Hydroxyzine for pediatric patients. Twenty seven sedation cases were performed in this study Selection criteria included good health(ASA I), 2 to 6 years of age, the need for sedation to receive dental treatment including anesthesia, and restorative procedure over at least two teeth. Patients were randomly classified into one group taking oral Chloral hydrate(60 mg/kg) and Hydroxyzine(1 mg/kg) and the other group recieving Chloral hydrate(60 mg/kg), Hydroxyzine(1 mg/kg) and submucosal Midazolam(0.1 mg/kg). Nitrous Oxide(50%) was used for both group during sedation. Patients were monitored using a pulse oximeter and a Bispectral monitor. A behavior scale was rated as quiet(Q), crying(C), movement(M), or struggling(S) every 2 minutes watching a recorded videotape. Analysis showed a significant difference in mean Bispectral index and SD during sedation across two groups(P<0.001). The group of patients injected with submucosal Midazolam in addition to oral Chloral hydrate and Hydroxyzine showed a lower mean Bispectral index and a narrower SD. PR and SpO2 for both groups remained within the normal values. Submucosal Midazolam improved the sedation quality by deepening sedation depth without compromising safety and enabled the sedation pattern to be kept more stable.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.62-72
• /
• 2007

The purpose of present study was to determine whether different kinds of curing lights can alter microtensile bond strength(MTBS) of class I cavity pulpal and axial wall specimens in primary molar. Thirty clean mandibular 2nd primary molar's occlusal enamel were removed and class I cavity, size of $2{\times}4{\times}2mm$ was prepared. Dentin bonding agent was applied according to manufacturer's manual. Each group was cured with Halogen Curing Unit, Plasma Curing Unit and LED Curing Unit. Composite resin was bulk filled and photo cured with same curing unit. MTBS specimens which size is $0.7{\times}0.7{\times}4mm$ were prepared with low speed saw. Specimens were coded by their curing lights and wall positions (Halogen - Axial wall group, Halogen - Pulpal wall group, Plasma - Axial wall group, Plasma - Pulpal wall group, LED - Axial wall group, LED - Pulpal walt group). MTBS were tested at 1 mm/min cross Head speed by Universal Testing Machine. Fractured surface and bonding surface was observed with SEM. T-test between axial and pulpal specimens in each curing lights, one-way ANOVA among different curing light specimens in each wall positions were done. Weibull distribution analysis was done. The results were as follows : Mean MTBS of pulpal wall specimens were significantly greater than that of axial wall specimens at each curing units(p<.05). There was no significant difference in the MTBS among three curing units at axial wall and pulpal wall. In Weibull distribution, pulpal wall specimens were more homogeneous than axial wall specimens.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.4
• /
• pp.337-347
• /
• 2011

The basic structure of the primary crowns usually resemble their succeeding permanent teeth. However, maxillary second primary molars resemble ipsilateral first permanent molars. Accordingly in this study, odontometric data of the two teeth was obtained, then analyzed to verify the morphological relationship and sex difference between the two teeth. Dental study casts were examined for their mesiodistal and buccolingual width of the crowns, diameter of each cusps, and intercuspal distances. Photographs of the crowns were taken to measure the angles between each cusp tip. The results are as follows : 1. In boys, PrI, PaI, DBC angle, and MBC angle did not show any statistically significant difference between the two teeth(p>0.05), and moderate level of correlations were observed. 2. In girls, crown index, DBC angle, and MBC angle of the two teeth did not show any statistically significant difference(p>0.05), and moderate level of correlations were recognized. 3. Measurements that did not show statistically significant difference between the two teeth in both boys and girls were DBC angle and MBC angle(p>0.05). In DLC angle, however, statistically significant difference was observed(p<0.01). 4. Most of the measurements showed sex differences, except DBC angle, which did not show any sex difference in both teeth(p>0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.1
• /
• pp.66-71
• /
• 2013

Muscular dystrophy is a genetically heterogeneous group of disorders characterized by progressive muscle weakness of variable distribution and severity. Fukuyama type congenital muscular dystrophy (FCMD) is an unusual form of muscular dystrophy with autosomal recessive inheritance and is clinically characterized by an early age of onset, severe central nervous system involvement, facial muscle weakness, and multiple joint contractures. Muscular dystrophy is susceptible to perioperative respiratory, cardiac and other complications. Patients with FCMD have upper airway muscle weakness, therefore general anesthesia is preferred to sedation regarding maintaining the airway when treating these patients. The development of malignant hyperthermia in general anesthesia for patients with muscular dystrophy is a concern. Total intravenous anesthesia should be used instead of inhaled anesthetics because of the risk of malignant hyperthermia. A 3-year-9-month old, 13kg girl with Fukuyama type congenital muscular dystrophy was scheduled for dental treatment under general anesthesia. She had multiple caries and 14 primary teeth needed caries treatment. Prior to general anesthesia, oral premedication with 9 mg midazolam was given. General anesthesia was induced and maintained with target controlled infusion of propofol $3{\sim}3.5{\mu}g/mL$. The patient with progressive muscular dystrophy was successfully treated under total intravenous anesthesia with a target controlled infusion of propofol. There were no complications related to anesthesia and dental treatment during or after the operation. This case suggests that target controlled infusion of propofol is a safe and appropriate anesthetic technique in FCMD patients for dental treatment.

• Journal of The Korean Association For Science Education
• /
• v.21 no.1
• /
• pp.89-101
• /
• 2001

The purpose of this study was to develop the elementary school science instructional material for nurturing students' creativity and to analyze the effects of this material on the changes of students' creativity. This material was composed of student's worksheet and a teacher's guidebook, in which are relevant to the elements of creativity and creative activities that can be applied to elementary science curriculum of 5th and 6th grades. Student's worksheets include various creative activities: imagination, guided imagery, experimental activity, mind mapping as wrap-up, and 'let's think' as an extended activity, game, puzzle, making a cartoon, to be, role playing, and so on. These materials were applied to 5th grade science class, 156 students. They were divided into two groups: the treatment group to which developed material was applied and the control group which was a traditional lecture-centered class. After this material had been applied for 3 months, students of both groups took a test of creativity. Interviews and observation were also carried out with three level groups (higher, medium and lower level) which were divided within the treatment group based on their creativity score. The results of this study were as follows: The treatment group showed higher score on creativity than that of control group(p<0.01). In the result of interviews and observation, the students of the higher and the medium level accomplished their tasks by themselves better than those on lower level.All of them took an interest in visual activity. In a wrapping-up step, the higher level students made mind map more systematically and the medium students improved as time goes on, but low level students feel constrained. In totally, they used various expression methods and were interested in making drawings and cartoons creatively.

• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.13-20
• /
• 2008

The flow rate measurements in a multi-phase flow pipeline were evaluated quantitatively by means of a clamp-on sealed radioisotope based on a cross correlation signal processing technique. The flow rates were calculated by a determination of the transit time between two sealed gamma sources by using a cross correlation function following FFT filtering, then corrected with vapor fraction in the pipeline which was measured by the ${\gamma}$-ray attenuation method. The pipeline model was manufactured by acrylic resin(ID. 8 cm, L=3.5 m, t=10 mm), and the multi-phase flow patterns were realized by an injection of compressed $N_2$ gas. Two sealed gamma sources of $^{137}Cs$ (E=0.662 MeV, ${\Gamma}$ $factor=0.326\;R{\cdot}h^{-1}{\cdot}m^2{\cdot}Ci^{-1}$) of 20 mCi and 17 mCi, and radiation detectors of $2"{\times}2"$ NaI(Tl) scintillation counter (Eberline, SP-3) were used for this study. Under the given conditions(the distance between two sources: 4D(D; inner diameter), N/S ratio: $0.12{\sim}0.15$, sampling time ${\Delta}t$: 4msec), the measured flow rates showed the maximum. relative error of 1.7 % when compared to the real ones through the vapor content corrections($6.1\;%{\sim}9.2\;%$). From a subsequent experiment, it was proven that the closer the distance between the two sealed sources is, the more precise the measured flow rates are. Provided additional studies related to the selection of radioisotopes their activity, and an optimization of the experimental geometry are carried out, it is anticipated that a radioisotope application for flow rate measurements can be used as an important tool for monitoring multi-phase facilities belonging to petrochemical and refinery industries and contributes economically in the light of maintenance and control of them.

• Journal of Radiation Protection and Research
• /
• v.39 no.4
• /
• pp.199-205
• /
• 2014

In the field of neutron detections, $^3He$ gas, the so-called "the gold standard," is the most widely used material for neutron detections because of its high efficiency in neutron capturing. However, from variable causes since early 2009, $^3He$ is being depleted, which has maintained an upward pressure on its cost. For this reason, the demands for $^3He$ replacements are rising sharply. Research into neutron converting materials, which has not been used well due to a neutron detection efficiency lower than the efficiency of $^3He$, although it can be chosen for use in a neutron detector, has been highlighted again. $^{10}B$, which is one of the $^3He$ replacements, such as $BF_3$, $^6Li$, $^{10}B$, $Gd_2O_2S$, is being researched by various detector development groups owing to a number of advantages such as easy gamma-ray discrimination, non-toxicity, low cost, etc. One of the possible techniques for the detection is an indirect neutron detection method measuring secondary radiation generated by interactions between neutrons and $^{10}B$. Because of the mean free path of alpha particle from interactions that are very short in a solid material, the thickness of $^{10}B$ should be thin. Therefore, to increase the neutron detection efficiency, it is important to make a $^{10}B$ thin film. In this study, we fabricated a $^{10}B$ thin film that is about 60 um in thickness for neutron detection using well-known technology for the manufacturing of a thin electrode for use in lithium ion batteries. In addition, by performing simple physical tests on the conductivity, dispersion, adhesion, and flexibility, we confirmed that the physical characteristics of the fabricated $^{10}B$ thin film are good. Using the fabricated $^{10}B$ thin film, we made a proportional counter for neutron monitoring and measured the neutron pulse height spectrum at a neutron facility at KAERI. Furthermore, we calculated using the Monte Carlo simulation the change of neutron detection efficiency according to the number of thin film layers. In conclusion, we suggest a fabrication method of a $^{10}B$ thin film using the technology used in making a thin electrode of lithium ion batteries and made the $^{10}B$ thin film for neutron detection using suggested method.

• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.214-230
• /
• 2016

This study was carried out to create a momentum for interest and understanding of local foods and provide base line data for the presentation of future effective development direction by investigating and researching cognitive characteristics, intake frequency, and preference about local foods targeting Pohang citizens. As a result of the investigation on intake frequency and preference of Pohang's local foods, in almost every item such as "gwamegi", "mul-hoe", "Guryongpo daege", "sashimi noodles", "mori noodles", "pidegi cuttle fish", "mulgomtang", "homchibap sikhae", "jesabap sikhae", "whale meat", "gaebokchi", "duchichijjim", "octopus sashimi", "roundnose flounder sashimi", "round flounder jorim", "fried round flounder", "gunsu sorasanjeok", "raw mustard muchim", "miyeongui dish", "sigeumjang", "chives dish", "rolled chives egg", "gokgang spinach", "pine dish", "yellow bean leaves muchim", "pickled green bean leaves", "green bean leaves watery kimchi", "Pohang sunrise bread", "black stone eel dish", "chili jjim", "red-pepper leaves namul muchim", "wild greens bibinbap", "acorn jello muchim", "oimiyeok changuk", "dongdongju", etc., significant differences were shown at the significance level of p<0.05~p<0.001. About understandings, views, development prospects, and development value and so forthof Pohang's local foods, more than 80% of respondents were positive, and in the questions asking concerns about local foods, more than half of the respondents gave a positive opinion, citing that they "have a little interest", and "tend to have an interest". Therefore, it can be seen that the future of local foods is bright. In the future, it is required that various cultural events related to local foods are held, a number of promotions are carried out, specialization of stores is distributed, and, at the same time, local foods are developed and generalized to suit modern sense, maintaining traditional taste in order to become global foods, as well as thedeformation of recipes.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.205-226
• /
• 2018

For sustainable development of air transport, the establishment and application of international standards of environmental protection area is significant. The development and use of alternative fire extinguishing agent to Halon, which is used for the fire extinguishing systems of engine nacelles/APU and cargo compartments, has been requested in order to protect the ozone layer. The ICAO has been active in preparing international standards and recommended practices (SARPs); however, certification of alternative fire extinguishing agents has been postponed due to technical readiness problem.. Consequently, the implementation of SARPs has also been postponed by two years from the end of 2016. to the end of 2018. As such consequences have caused confusion among Member States regarding its implementation, it is necessary to discuss and pay more attention to this issue. ICAO Council and Air Navigation Commission should consider between setting the implementation time frame earlier or giving enough time for mature readiness and preparedness. Also in order to minimize the unnecessary discharge of Halon owned by Member States, it is necessary to consider efficient management methodologies; for example, requesting fire extinguisher manufacturers to recharge in professional ways. For the successful implementation of the SARPs, ICAO developed an implementation task list as including notification of differences, establishment of a national implementation plan, drafting of the modification to the national regulations and means of compliance, adoption of the national regulations and means of compliance. Member States can develop their own rule making process in reference with the ICAO implementation task list. This issue was presented and discussed during the 54th Conference of Directors General of civil aviation, Asia and Pacific Regions which was held in Ulaanbaatar, Mongolia in 2017 with significant attention among participated Contacting States. In this regards, ICAO Council and Air Navigation Commission should consult with Legal Bureau lawyers regarding SARPs preparing process to eliminate difficulties and confusions for proper implementation within effective date.