• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.5
• /
• pp.377-387
• /
• 2001

This paper presents leakage characteristics of a scroll compressor applying alternative refrigerants of R22 such as R407c and R410a under actual operating conditions. Because leakage in a scroll compressor produce significant losses and degradation of performance, those should be clarified to design a high efficient scroll compressor with alternative refrigerants of R22. However, flank and tip leakage characteristics of a scroll compressor with alternative refrigerants are very limited in open literature. In the present study, both experimentation and modeling of the leakages in the scroll compressor were performed. As a result, it was observed that the leakages of the scroll compressor with R407c increased by 15%, and that with R410a increased by 76% as compared to the compressor applying R22 under standard load conditions due to a higher upstream pressure and a higher pressure difference between pockets.

• Tribology and Lubricants
• /
• v.27 no.6
• /
• pp.314-320
• /
• 2011

Although swash-plate type axial piston pumps have the merits of wide operating conditions and high efficiency, the characteristics of pressure pulsation and flow ripple which result in system noise generation are on-going problems. This research examined the analytic models of the dynamic oil pressure and flow characteristics in the pump. A new mathematical model which considered the pressure behaviors of each cylinder and discharge piping was developed to analyze the pump pressure and flow. This model also considered the leakages in the clearances which many researchers have ignored so far. Using the developed model, numerical calculations were implemented. The results showed that widely used simple model which considered only a single cylinder can not predict actual discrete flow dynamics and that fluid inertia effect has to be considered in the mathematical model. Several critical parameters were discussed such as port volume and discharge resistance on the assumption that the pipe length is not so long. The effect of leakages was studied on the final stage.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.7
• /
• pp.332-334
• /
• 2006

In this paper, we present an equalization scheme for 8-VSB signals for the ATSC DTV system. We propose a complex feedback filter and complex feedback sample generator for DFE to equalize 8-VSB signals in order to efficiently remove multipath distortions causing leakages from the qudrature component. We show that the proposed structure outperforms the conventional DFE used for the digital VSB which uses a real-valued feedback filter with real-valued decisions.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.6B
• /
• pp.207-217
• /
• 2008

Secure channels, indispensable to many applications, can be established by using an authenticated key exchange (AKE) protocol where the involving parties authenticate one another and then share authenticated session keys over insecure networks. In this paper, we introduce a new type of AKE protocols that are especially designed to minimize the damages caused by leakages of stored secrets. Such protocols are called Leakage-Resilient AKE (LR-AKE) protocols, whose motivation, design principles, several constructions, security analysis and applications are explained in detail.

• International Journal of Fluid Machinery and Systems
• /
• v.8 no.3
• /
• pp.193-201
• /
• 2015

This paper deals with the influence of leakage flow existing in SHF pump model on the analysis of internal flow behaviour inside the vane diffuser of the pump model performance using both experiments and calculations. PIV measurements have been performed at different hub to shroud planes inside one diffuser channel passage for a given speed of rotation and various flow rates. For each operating condition, the PIV measurements have been trigged with different angular impeller positions. The performances and the static pressure rise of the diffuser were also measured using a three-hole probe. The numerical simulations were carried out with Star CCM+ 9.06 code (RANS frozen and unsteady calculations). Some results were already presented at the XXth IAHR Symposium for three flowrates for RANS frozen and URANS calculations. In the present paper, comparisons between URANS calculations with and without leakages and experimental results are presented and discussed for these flow rates. The performances of the diffuser obtained by numerical calculations are compared to those obtained by the three-holes probe measurements. The comparisons show the influence of fluid leakages on global performances and a real improvement concerning the efficiency of the diffuser, the pump and the velocity distributions. These results show that leakage is an important parameter that has to be taken into account in order to make improved comparisons between numerical approaches and experiments in such a specific model set up.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.1
• /
• pp.36-42
• /
• 2015

Objective : Complete sellar floor reconstruction is critical to avoid postoperative cerebrospinal fluid (CSF) leakage during transsphenoidal surgery. Recently, the pedicled nasoseptal flap has undergone many modifications and eventually proved to be valuable and efficient. However, using these nasoseptal flaps in all patients who undergo transsphenoidal surgery, including those who had none or only minor CSF leakage, appears to be overly invasive and time-consuming. Methods : Patients undergoing endoscopic endonasal transsphenoidal tumor surgery within a 5 year-period were reviewed. Since 2009, we classified the intraoperative CSF leakage into grades from 0 to 3. Sellar floor reconstruction was tailored to each leak grade. We did not use any tissue grafts such as abdominal fat and did not include any procedures of CSF diversions such as lumbar drainage. Results : Among 200 cases in 188 patients (147 pituitary adenoma and 41 other pathologies), intraoperative CSF leakage was observed in 27.4% of 197 cases : 14.7% Grade 1, 4.6% Grade 2a, 3.0% Grade 2b, and 5.1% Grade 3. Postoperative CSF leakage was observed in none of the cases. Septal bone buttress was used for Grade 1 to 3 leakages instead of any other foreign materials. Pedicled nasoseptal flap was used for Grades 2b and 3 leakages. Unused septal bones and nasoseptal flaps were repositioned. Conclusion : Modified classification of intraoperative CSF leaks and tailored repair technique in a multilayered fashion using an en-bloc harvested septal bone and vascularized nasoseptal flaps is an effective and reliable method for the prevention of postoperative CSF leaks.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.938-946
• /
• 2008

This study is on sealing leakage holes where are in landfills to make clay cakes with clay particles, which have a negative surface charge using the method of electrophoresis. Generally, electrophoresis is the motion of charged particles in a colloid under the influence of an electric field; particles with a positive charge go to the cathode and negative to the anode. In this study in order to develop the prevention system of leakages of the leachate in landfills, one-dimensional electrophoresis tests were conducted for determining the properties of the motion of the electrophoresis and cutoff using the method of electrophoresis depending on various the effect factors such as types of clays, concentrations of the clays, and applied electric field. In case of the experiments of determining the optimum clays, Na and Ca-Bentonite, Na and Ca-Montmorillonite, which have greater zeta-potential, cation, exchange capacity as well as ability of cutoff, and Micro-cement inducing cementation were chosen and then the effect of those clays was investigated. Moreover, the properties of the motion and settling of the clays were investigated following electric field varied from 0 to 1V/cm at different concentration of the clays in order to determine both the properties of the motion of the clays and the efficiency of electric field when applying different direct current. Ultimately, the ability of cutoff was examined through measuring the permeability of the clay cakes derived from the one-dimensional electrophoresis tests.

• Journal of Gastric Cancer
• /
• v.4 no.3
• /
• pp.164-168
• /
• 2004

Purpose: The most feared complication of gastrointestinal tract operations is anastomotic leakage, not only because of the presumed individual surgeon's culpability but also because of the assumption that this event is often fatal. We have experienced 32 cases of anastomotic leakage after elective gastric resection during 8 years. The purpose of this study was to evaluate the result of their treatment. Materials and Methods: We evaluated the records of 1335 patients who had undergone elective gastric resection for an adenocarcinoma of stomach from January 1995 to October 2003 and conducted a retrospective, multivariate analysis. Results: Of the 1335 patients, 32 ($2.4\%$) sustained an anastomotic leakage. Anastomotic leakages usually developed on mean postoperative day $9.1\pm3.2$ (range:$1\∼18$ days).Overall, $31.3\%$ (10/32) of patients who sustained an anastomotic leakage died. The anastomotic leakages were identifed by radiological study or by operative finding at the site of the duodenal stump (20 patients), the esophagojejunostomy (7), the gastroduodenostomy (4), and the gastrojejunostomy (1). Fourteen patients ($43.8\%$) underwent a relaparotomy, a drainage procedure in the main, and 18 patients ($56.3\%$) were treated conservatively. The mortality rates were $42.9\%$ (6/14) and $22.2\%$ (4/18), respectively, but this difference was not statistically significant. A cox's proportional hazard analysis showed that a body-mass Index < 24 kg/m2 (odds ratio 5.55, $95\%$ CI: $0.69\∼44.82$) and non-enteral feeding (odds ratio 18.27, $95\%$ CI 2.22.150.69) were independent factors of mortality due to anastomotic leakage. Conclusion: Our observations show that anastomotic leakage after an elective gastric resection has a high risk of being fatal. Moreover, for a patient with a body-mass index lower than $24\;kg/m^{2}$ and/or non-enteral feeding, an anastomotic leakage after an elective gastric resection has a higher risk of being fatal.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.422-429
• /
• 2013

It is of great importance to localize leakages in complex pipelines for assuring their safety. A sensor array that can detect where leakages occur enables us to monitor a wide area with a relatively low cost. Beamforming is a fast and efficient algorithm to estimate where sources are, but it is generally made use of in free field condition. In practice, however, many pipelines are placed in a closed space for the purpose of safety and maintenance. This leads us to take reflected waves into account to the beamforming for interior leakage localization. Beam power distribution of reflected waves in a closed space is formulated, and spatial average is introduced to suppress the effect of reflected waves. Computer simulations and experiments ensure how the proposed method is effective to localize leakage in a closed space for structural health monitoring.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.496-503
• /
• 2016

Leakages at plant structures of power and petrochemistry plants have led to casualties and economic losses. These leakages are caused by fatigue failure of pipelines and their wall thickness. Vibration measurement methods for plant pipelines mainly use acceleration and laser sensors. These sensors are difficult to install and operate and thus lead to an increase in operational cost especially for wide area surveillance. Recently, measurements of leak and vibration displacements using cameras have attracted the interest of many researchers. This method has advantages such as simple installation, long distance monitoring, and wide area surveillance. Therefore, in this paper, we have developed a system that can measure the leakage and vibrational displacement by using a camera. Furthermore, the developed system was verified with experimental data.