• Convergence Security Journal
• /
• v.16 no.7
• /
• pp.167-172
• /
• 2016

The purpose of this study is to provide implications for preventing insider information leakages in public agencies for national security. First, the study examined the definitions and current usage of information security systems of public agencies were examined. Second, web-service base information leaks and malware-base information leaks were discussed and three major credit card companies' personal information leakage cases were analyzed. Based on the analysis, four solutions were provided. First, information leakages can be protected by using web filtering solutions based on the user, which make possible to limit frequencies of malware exposures. Second, vaccine programs and vaccine management system should be implemented to prevent information leakages by malware. Third, limit the use of portable devices within local networks to prevent information leakages and vaccines programs for malware should be regularly used. Forth, to prevent information leakages by smartphone malwares, data encryption application should be used to encrypt important information.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.5
• /
• pp.215-222
• /
• 1996

This paper reports on theoretical study of the compression process within balanced type vane pump for Electro-Hydraulic Power Steering(EHPS). Equations fo camring profiles are derived, then displacements, velocities, accelerations, and jerks are calculated. Vane side leakages, vane slit leakages, and rotor side leakages are considered and calculated. Numerical integration of flow equation is performed using 4th Runge-Kutta method. As a result of analysis, it is found that chamber pressure depends on rotational speeds, bulk modulus of fluid, notches, camring profiles, and positions of delivery port. Especially, the variation of notch area is the most important factor that prevents pressure from rapid rising.

• Journal of Information Processing Systems
• /
• v.12 no.2
• /
• pp.249-262
• /
• 2016

In 2004, Yang et al. proposed a threshold proxy signature scheme that efficiently reduced the computational complexity of previous schemes. In 2009, Hu and Zhang presented some security leakages of Yang's scheme and proposed an improvement to eliminate the security leakages that had been pointed out. In this paper, we will point out that both Yang and Hu's schemes still have some security weaknesses, which cannot resist warrant attacks where an adversary can forge valid proxy signatures by changing the warrant $m_w$. We also propose two secure improvements for these schemes.

• Convergence Security Journal
• /
• v.15 no.6_2
• /
• pp.151-160
• /
• 2015

According to the document from the National Industrial Security Center in 2015, from 2003 to 2014 the disclosure number of industrial spy in South Korea was 438, and the damages due to the industrial technology leakages amounted 50 trillion won annually. Because the industrial technology leakage exercises great influence on the enterprises and the country. countermeasures against industrial technology leakages should be established. Therefore, the purpose of this research is to suggest measures preventing industrial technology leakages and related crimes in enterprises by applying the Crime Prevention Through Environmental Design(CPTED) technique. This research analyzed the recent technology leakage cases and used an analysis of literature research. From the result of this research, we suggested 1) Access Control, 2) Surveillance Enhancement, 3) Territoriality of Reinforcement, and 4) Activity Support by applying the CPTED technique for preventing industrial technology leakages. The limitations of this research and the recommendations for future research were discussed at the last part of this research.

• Journal of Chest Surgery
• /
• v.24 no.5
• /
• pp.463-469
• /
• 1991

Post-anastomotic leakage and stenoses remain major complications and are still responsible for many mortalities after esophageal reconstructive procedures. If the hand-suture is used, anastomotic leaks developed frequently than stenoses. But post-anastomotic leakages are more critical than post-anastomotic stenoses. If the stapler is used, anastomotic stenoses will develop frequently and not critical than anastomotic leakages. The stapler suture method is easier and quicker than the hand suture method in the esophageal anastomotic procedures. But the disadvantages of the stapler suture method is that there is not reachable site with anastomotic stapler the thoracic inlet region and the cost is expensive. We have treated 44 cases of the surgical complications after esophageal reconstructive procedure with conservative and surgical treatment for 10 years from January, 1980 to December, 1989. The anastomotic site stenoses were 8 cases in the hand-suture methods and 4 cases in the stapler-suture methods. The anastomotic leaks were 8 cases in hand-suture methods and 5 cases in stapler-suture methods. There were one death in the surgical repair of four post-operative anastomotic stenoses and two deaths in the surgical repair of three post-operative anastomotic leakages. Ever though we consider that there is more anastomotic leakage than stenoses after the hand-suture methods in esophageal reconstructive procedures. the cost with long stay in the intensive care unit to treat anastomotic leakage after the hand-suture, would be more expensive than-the cost of the treatment of the anastomotic stenoses after auto-suture.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.107-116
• /
• 2001

Any small leakages in the submarines could lead to the serious consecutive damages since it operates under high water pressure. Such leakages including damages of pipe and hull itself eventually could incur humane casualties and loss of expensive properties as well as the loss of combat capabilities. In this paper, knowledge based decision system is developed. The domain knowledge is acquired from document of submarine design, design expertise and interview with operator. Damages of hull itself and pipes are treated and decision is recommended whether to stay in the sea or to be blowing, for instance.

• Current Optics and Photonics
• /
• v.3 no.2
• /
• pp.164-171
• /
• 2019

Photoluminescence (PL) properties of GaN-based light-emitting diodes (LEDs) were analyzed to study the effects of carrier leakage on the luminescence properties at room temperature. The electrical leakage and PL properties were compared for LEDs showing leakages at forward bias and an LED with an intentional leakage path formed by connecting a parallel resistance of various values. The leakages at the forward bias, which could be observed from the current-voltage characteristics, resulted in an increase in the excitation laser power density for the maximum PL efficiency (ratio of PL intensity to excitation power) as well as a reduction in the PL intensity. The effect of carrier leakages on PL properties was similar to the change in PL properties owing to a reduction of the photovoltage by a reverse current since the direction of the carrier movement under photoexcitation is identical to that of the reverse current. Valid relations between PL properties and electrical properties were observed as the PL properties deteriorated with an increase in the carrier leakage. The results imply that the PL properties of LED chips can be an indicator of the electrical properties of LEDs.

• Journal of Sensor Science and Technology
• /
• v.32 no.2
• /
• pp.75-81
• /
• 2023

The significance of gas sensors has been emphasized in various industries and applications, owing to the growing significance of environmental, social, and governance (ESG) management in corporate operations. In particular, the monitoring of hazardous gas leakages and detection of fugitive emissions have recently garnered significant attention across several industrial sectors. As industrial workplaces evolve to ensure the safety of their working environments and reduce greenhouse gas emissions, the demand for high-performance gas sensors in industrial sectors dealing with toxic substances is on the rise. However, conventional gas-sensing systems have limitations in monitoring fugitive gas leakages at both critical and subcritical concentrations in complex environments. To overcome these difficulties, recent studies in the field of gas sensors have employed techniques such as mobile robotic olfaction, remote optical sensing, chemical grid sensing, and remote acoustic sensing. This review highlights the significant progress made in various technologies that have enabled accurate and real-time mapping of gas distribution and localization of hazardous gas sources. These recent advancements in gas-sensing technology have shed light on the future role of gas-detection systems in industrial safety.

• Korean Journal of Weed Science
• /
• v.11 no.3
• /
• pp.167-173
• /
• 1991

Various formulations of oxyfluorfen were tested to evaluate effect of weed control efficacy and rice injury as affected by different degrees of water leakages. Rice injury was increased with increased water leakages. The formulations of Elvan, Coal slag and Chitosan gave slight injury to rice under all conditions included in terms of visual ratings, plant height and fresh weight production. However, weed control of most formulations was decreased and increased with increased water leakages for annual weeds and perennial weeds, respectively, Annual weeds were controlled greater than 90~ by all treatments, but perennial weed control was relatively low. Scirpus juncoides was the most tolerant annual weed to Oxyfluorfen. Elvan formulation showed somewhat decreased control of barnyardgrass with increased water leakages. The promising formulations of Oxyfluorfen were Chitosan, Coal slag, Bentonite B and Elvan (if the first releasing rate increased), which injured rice slightly and controlled annual weeds excellently regardless of degrees of water leakages.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.181-187
• /
• 2016

A thermal power plant has a heat exchanger tube to collect and convert the heat generated from the high temperature and pressure steam to energy, but the tubes are arranged in a complex manner. In the event that a leakage occurs in any of these tubes, the high-pressure steam leaks out and may cause the neighboring tubes to rupture. This leakage can finally stop power generation, and hence there is a dire need to establish a suitable technology capable of detecting tube leaks at an early stage even before it occurs. As shown in this paper, by applying acoustic emission (AE) technology in existing boiler tube leak detection equipment (BTLD), we developed a system that detects these leakages early enough and generates an alarm at an early stage to necessitate action; the developed system works better that the existing system used to detect fine leakages. We verified the usability of the system in a 560MW-class thermal power plant boiler by conducting leak tests by simulating leakages from a variety of hole sizes (ⵁ2, ⵁ5, ⵁ10 mm). Results show that while the existing fine leakage detection system does not detect fine leakages of ⵁ2 mm and ⵁ5 mm, the newly developed system could detect leakages early enough and generate an alarm at an early stage, and it is possible to increase the signal to more than 18 dB.