• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.378-385
• /
• 2023

The importance of wearing respiratory protective equipment has been highlighted even more during the COVID-19 pandemic. Even if the suitability of respiratory protection has been confirmed through testing in a laboratory environment, there remains the potential for leakage points in the respirators due to improper application by the wearer, damage to the equipment, or sudden movements in real working conditions. In this paper, we propose a method to detect the occurrence of leak holes by measuring the pressure changes inside the mask according to the wearer's breathing activity by attaching an IoT sensor to a full-face respirator. We designed 9 experimental scenarios by adjusting the degree of leak holes of the respirator and the breathing cycle time, and acquired respiratory data for the wearer of the respirator accordingly. Additionally, we analyzed the respiratory data to identify the duration and pressure change range for each breath, utilizing this data to train a neural network model for detecting leak holes in the respirator. The experimental results applying the developed neural network model showed a sensitivity of 100%, specificity of 94.29%, and accuracy of 97.53%. We conclude that the effective detection of leak holes can be achieved by incorporating affordable, small-sized IoT sensors into respiratory protective equipment.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.413-421
• /
• 1990

Acoustic emission signals due to leak from circular holes of 0.4, 1, 2 and 4mm diameter and rectangular slits of different geometry having the same cross section as 4mm diameter hole was studied both analytically and experimentally. Acoustic emission signals from a wide-band type transducer were transformed to digital signals through a digital oscilloscope, and $V_{rms}$ and frequency spectrum were obtained by processing digital signals. Relationships between acoustic parameters and fluid mechanical parameters were derived analytically. A quadrapole aerodynamic model was applied in the analysis of leak from the circular holes and $V_{rms}$ was found to be proportional to the root square of leak rate through the circular hole. A modified model based on dipole source mechanism and laminar equivalent diameter was applied in the analysis of leak signals from the rectangular slits. In the case of constant pressure, $V_{rms}$ increased as the laminar equivalent diameter of slit decreased. In the case of constant laminar equivalent diameter, however the result was similar to that for leak from the circular hole. The frequency spectra of leak signals shows the same frequency characteristics irrespective of the pressure difference.rence.

• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.137-142
• /
• 2022

Leak detection is one of the most important challenges in condition monitoring of water pipelines. Fiber Bragg grating (FBG) sensors offer an attractive technique to detect leak signals. In this paper, leak measurements were conducted on a water distribution pilot plant with a length of 270 m and a diameter of 100 mm. FBG sensors were installed on the pipeline surface and used to detect leak vibration signals. The leak was demonstrated with 1-, 2-, 3-, and 4-mm diameter leak holes in four different pipe types. The frequency response of leak signals was analyzed by fast Fourier transform analysis in real time. In the experiment, the frequency range of leak signals was approximately 340-440 Hz. The frequency shifts of leak signals according to the pipe type and the size of the leak hole were demonstrated at a pressure of 1.8 bar and a flow rate of 25.51 m³/h. Results show that frequency shifts detected by FBG sensors can be used to detect leaks in pipelines.

• 해양환경안전학회지
• /
• 제26권4호
• /
• pp.317-326
• /
• 2020

본 연구에서는 LNG 추진선에서 배관의 파손으로 천연가스가 누출되었을 때 누출공의 크기별 플래시 화재, 과압, 복사열에 따른 피해범위를 ALOHA(Areal Location of Hazardous Atmospheres)를 이용하여 산출했다. 그리고 민감도 분석을 위해 환경 변수(풍속, 대기온도, 대기 안정도)와 공정 변수(배관 압력, 배관 길이)로 구분하여 다양한 시나리오별 피해영향범위를 분석했다. 그 결과 환경 변수에 따른 피해범위는 플래시 화재에 의한 피해범위가 가장 컸으며 다음으로 과압, 복사열 순서로 큰 피해범위를 나타냈다. 그리고 공정 변수에 따른 피해범위를 산출한 결과 배관의 압력과 길이, 누출공의 크기와 관계없이 플래시 화재에 의한 피해범위가 가장 컸으며, 환경 변수와 동일하게 과압, 복사열 순서로 높은 피해범위를 보였다. 또한 누출공의 크기가 클수록 환경 변수와 공정 변수가 피해범위에 큰 영향을 주었으며 제트 환재에 의한 피해범위는 환경 변수에 비해 공정 변수에 의한 피해범위가 더 큰 것을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권9호
• /
• pp.918-922
• /
• 2015

선박으로부터 배출되는 오염원과 온실가스에 대한 국제적 규제가 점점 더 강화되어 감에 따라, 액화 천연 가스를 선박의 연료로 사용하는데 대한 관심이 높아져 가고 있다. 본 연구는 액화 천연 가스 연료 선박에서 사용되는 두 가지 방식의 연료 가스 공급 장치에 대하여 폭발 잠재 위험 분석을 수행하였다. 8500 TEU 급 컨테이너 선박을 목표 선박으로 선정하여, 액화 천연 가스 저장 탱크를 설계하였고 각 연료 공급 방식의 운전을 위한 압력 조건을 가정하였다. 누출공의 크기를 세 개의 범주로 분류하여, 각 누출공 크기 범주에 대한 누출 빈도를 산출하였고, 대표 누출공의 크기와 누출량을 추산하였다. 방출률의 증가와 누출 빈도는 역비례 관계를 보였으며, 펌프 방식 연료 공급 장치에서는 누출 빈도가 높게 나타났고, 가압 방식 연료 공급 장치에서는 방출률이 높게 나타났다. 전산 유체 역학 시뮬레이션을 통하여 폭발 잠재 위험 분석을 수행하고 각 연료 공급 장치에 대한 결과를 비교하였다.

• 한국가스학회지
• /
• 제24권2호
• /
• pp.15-21
• /
• 2020

현재 KS C IEC 60079-10-1 등에서 2차 누출 시 누출 구멍의 반경(hole radius)은 권고로 하여 표현되어 있다. 누출 구멍 크기의 과소평가는 누출률에 대한 계산 값의 과소평가로 이어질 수 있고, 안전상의 이유로 검토되는 누출 구멍 크기의 보수적인 계산은 과대평가로 이루어 질 수 있어 과대한 위험장소 범위로 나타낼 수 있기 때문에 이 또한 피해야 한다. 그러므로 누출 구멍의 크기를 추정할 때에는 신중하게 균형 잡힌 접근이 필요하다. 이러한 논리를 바탕으로 하여 금번 연구에서는 반도체 산업에서 적용되는 국제안전규격인 SEMI S6 기준에 따른 실험결과로 위험물질 누출 시 가스박스 내부 농도를 파악하여 안정성을 검토해보고 SEMI F15 누출률 기준, SEMI S6 누출률 기준에 따라 KS C IEC 60079-10-1의 공식을 적용하여 폭발위험장소의 범위 선정을 실시하였다. 이를 바탕으로 하여 향후 반도체 산업 등 폭발위험장소의 적용이 까다로운 FAB 설비의 대안으로 배기성능 향상이 필요한지 여부를 검토해보고자 한다.

• 소성∙가공
• /
• 제21권3호
• /
• pp.195-201
• /
• 2012

A vacuum ladling die casting system is suggested as a means to obtain a high vacuum level. A high vacuum of 17.8 mmHg is obtained by sealing the inner space of the mould. The sample product is a rear-head housing for an auto-compressor, and the die-casting with 6-cavities was conducted. The flow analysis shows that the filling speed during vacuum ladling is faster than for a non-vacuum system. The air holes in the sample product were too small to be seen with the naked eye in X-ray films. Density tests show that the high vacuum ladling system reduces the internal porosity as much as 57.8% when compared to the non-vacuum system. A defective rate of only 0.17% was found from leak testing. The results of this research prove that the high vacuum die-casting process is useful for manufacturing of aluminium components under high internal pressure.

• ETRI Journal
• /
• 제39권3호
• /
• pp.417-427
• /
• 2017

This paper investigates the security of constant weight countermeasures, which aim to produce indistinguishable leakage from sensitive variables and intermediate variables, assuming a constant Hamming distance and/or Hamming weight leakages. To investigate the security of recent countermeasures, contrary to many related studies, we assume that the coefficients of the simulated leakage models follow a normal distribution so that we may construct a model with approximately realistic leakages. First, using our simulated leakage model, we demonstrate security holes in these previous countermeasures. Subsequently, in contrast to the hypotheses presented in previous studies, we confirm the resistance of these countermeasures to a standard correlation power analysis (CPA). However, these countermeasures can allow a bitwise CPA to leak a sensitive variable with only a few thousand traces.

• 대한의료기공학회지
• /
• 제11권1호
• /
• pp.262-283
• /
• 2009

1. Anus is one of the nine holes, a soul store and on the lungs and the lungs, so the soulgate is said to meet. In addition, weight 450g, length 14.31inch, horizontal, and the 2.74inch, hit the road, the lungs and the reaction of the colon was found to represent the five viscera were dirty. 2. Spirit directly to the anus of the five viscera and the traffic outside and pass the information where I can get, and a close relation to the breathing, and each groups' je-hang-suk-sin-gong, je-hang-gong, anal breathing, jwa-sik training, jung-gi-dan-beop, martial arts method, Kegel exercises, breathing training, such as the anus is the name. 3.Anal way of breathing while breathing naturally slow down when you inhale air, tighten the anus and rectum to release when you breathe out, give way (or vice versa), the number of 5-20, he'll make you build up gradually. 4.Associated with respiratory training in Oriental medicine perspective, it is a Mac gi-gyeong eight vessel. In addition, out of gi-gyeong eight vessel in breathing training and more closely related to the Conception Vessel, Governor Vessel. 5.Governor Vessel, Conception Vessel and connect the energy up, down, left and right to communicate is the so-ju-cheon. To complete the Governor Vessel instantly without the energy leak from the Mir-yeo(尾閭) to reach the anus should be breathing. 6.Start the Conception Vessel Through fare Vessel hoeǔm, hoeǔm important acupuncture point can be activated by itself does not have the muscle to the hoeǔm around the anus energy and blood breathing helps circulation.