• Korean Journal of Plant Taxonomy
• /
• v.34 no.3
• /
• pp.265-271
• /
• 2004

A new species of Corydalis sect. Corydalis (Fumariaceae), C. namdoensis B.U. Oh et J.G. Kim, is described from the central and southern part of Korea. The new species is distinct from its close relative C. albipetala in having very variable leaf shapes, broadly flattened fusiform fruits, seed arrangement nearly in two rows in capsule, V-shaped inner petal apex and limited distribution area.

• Journal of Korean Society of Forest Science
• /
• v.64 no.1
• /
• pp.52-63
• /
• 1984

This study was intended to identify 17 taxa. (5 varieties and 12 species) of the genus Acer in Korea on the basis of the shapes of stomata, the type of trichome on the different part of leaves, the shapes, arrangement and number of stele in cross section of petiole. The results obtained were summarized as follows; 11 The shape of guard cells of stomata in the genus Acer was anomcytical, and the size of the cells ranged from 10.25 to $21.00{\mu}$ in length and from 7.57 to $11.83{\mu}$ in width. 2) Eleven types of trichome on the leaf in the genus Acer were found; pilose, sericeous, velutinous, woolly, glabrate, puberulent, bladder hair, hispid, hirsute and uncinate. This characteristics also established a good criterion for identification of species. 3) The stele of petiole in the genus Acer was characterized by eustele and atactostele with polybranch, and the six groups of the shape of numerical change of stele; B>M=T, BM

• Korean Journal Plant Pathology
• /
• v.14 no.5
• /
• pp.408-412
• /
• 1998

In order to illustrate the role of conidia of Mycosphaerella nawae as a secondary inoculum in nature, pseudothecial development on persimmon leaves was investigated microscopically. The fungal ascospores have been believed as the primary or only inoculum source in nature, however, pseudothecia were readily formed on persimmon leaves infected naturally and artificially by conidia. The pseudothecia of M. nawae were found to form in the tissues of infected leaves while the leaves were still hanging on the trees. The size of pseudothecia were approximately 51.0~122.4$\times$51.0~112.2 ${\mu}{\textrm}{m}$ (82.8 $\times$72.5 ${\mu}{\textrm}{m}$in average), the shapes were spherical, ovoid or occidental pear type. The sizes of asci were approximately 30.6~61.2$\times$8.2~10.2 ${\mu}{\textrm}{m}$(46.6$\times$9.4 ${\mu}{\textrm}{m}$ in average) and the shapes were cylinder or banana. The ascospores were mostly spindle type, and the sizes were 10.2~12.2$\times$3.1~4.1 ${\mu}{\textrm}{m}$ (11.4$\times$3.2 ${\mu}{\textrm}{m}$ in average)-like. The pseudothecial formation was initiated before defoliation and morphological characteristics of the pseudothecia, ascus and ascospores on the infected leaves were fully illustrated in this study. Results indicated that conidia of M. nawae induce circular leaf spot of persimmon as much as ascospores, and might play an important role of the disease epidemics in nature.

• Journal of Crop Science and Biotechnology
• /
• v.10 no.4
• /
• pp.223-230
• /
• 2007

Vitellaria paradoxa commonly called shea is an important agro forestry and fruit-bearing species present in four agro-ecological zones of Cameroon. The goal of this work was the morphological characterization of certain populations of V. paradoxa which will serve as a necessary step for a subsequent genetic study of the species. Morphological observations related to 20 agronomic traits, studied on 8-13 trees selected from each of the eight shea populations across four different agro-ecological zones located in four provinces of Cameroon were studied. The study showed that there was a variation between the populations, related to the traits measured on the trunk, fruit, nut, and leaf. Three shapes of the tree(ball, broom, and trained), five shapes of the fruit(round, oblong, reversed pear, ovoid, and oblong), three colors of the nut(clear brown, dark brown, and blackish brown) were identified. The principal component analysis(PCA) carried out on the quantitative characters revealed 72% of the total variance expressed on the first and second main axis. This variation was essentially explained by the traits measured on the fruits and on the nuts. The analyses showed that only the traits of the fruits and the nuts were discriminative. The shea populations studied were structured into two distinct groups using these discriminative traits.

• Journal of Plant Biotechnology
• /
• v.5 no.4
• /
• pp.215-219
• /
• 2003

Optimal shoot regeneration and transformation conditions of root type chicory (Cichorium intybus L. var. sativus cv Cesare) were studied. Leaf explants were co-cultured with Agrobacterium tumefaciens, which contained NPTII as a selectable marker and a rice homeotic gene, OsMADS1, that encodes a MADS-domain-containing transcription factor. After one day of co-cultivation, explants were transferred to selection media consisting of MS basal medium supplemented with 0.5 mg/L BAP, 0.1 mg/L IAA, 70 mg/L kanamycin, and 250 mg/L cefotaxime. PCR and Southern blot analyses revealed stable integration of the OsMADS1 gene in the chicory genome. Four-teen original transgenic plants ($T_o$ plants) were acclimatized in the greenhouse and examined for their morphological characters. Most of the transgenic plants showed altered morphologies, such as short, bushy, and early-flowering phenotypes with reduced apical dominance. Additionally, half of the transgenic plants exhibited altered leaf shapes, and 4 out of 14 plants were sterile. These phenotypes were inherited by the next generation. Northern blot analysis confirmed expression of the OsMADS1 gene in both floral and vegetative organs.

• Smart Structures and Systems
• /
• v.7 no.1
• /
• pp.1-13
• /
• 2011

It has been shown in the literature that active adjustment of the intake area of a jet engine has potential to improve its fuel efficiency. This paper presents the design and control of a novel proof-of-concept active jet engine intake using Nickel-Titanium (Ni-Ti or Nitinol) shape memory alloy (SMA) wire actuators. The Nitinol SMA material is used in this research due to its advantages of high power-to-weight ratio and electrical resistive actuation. The Nitinol SMA material can be fabricated into a variety of shapes, such as strips, foils, rods and wires. In this paper, SMA wires are used due to its ability to generate a large strain: up to 6% for repeated operations. The proposed proof-of-concept engine intake employs overlapping leaves in a concentric configuration. Each leaf is mounted on a supporting bar than can rotate. The supporting bars are actuated by an SMA wire actuator in a ring configuration. Electrical resistive heating is used to actuate the SMA wire actuator and rotate the supporting bars. To enable feedback control, a laser range sensor is used to detect the movement of a leaf and therefore the radius of the intake area. Due to the hysteresis, an inherent nonlinear phenomenon associated with SMAs, a nonlinear robust controller is used to control the SMA actuators. The control design uses the sliding-mode approach and can compensate the nonlinearities associated with the SMA actuator. A proof-of-concept model is fabricated and its feedback control experiments show that the intake area can be precisely controlled using the SMA wire actuator and has the ability to reduce the area up to 25%. The experiments demonstrate the feasibility of engine intake area control using an SMA wire actuator under the proposed design.

• Plant Resources
• /
• v.4 no.1
• /
• pp.41-47
• /
• 2001

This study was conducted to investigate the occurrence of Soil borne wheat mosaic virus(SbWMV) in barley fields in Korea and to examine the host pathogenicity of SbWMV. By using the ELISA test, SbWMV was detected in the six regions : Suwon, Milyang, Jinju, Youngkwang, Iksan, and Chonju. SbWMV was isolated from the two strains, Albori strain from Jinju and Eunpamil strain from Milyang. SbWMV was collected from leaves showing mosaic, yellowing and necrosis stripes. SbWMV was inoculated mechanically on 1∼1.5 leaf stages with leaf-rubbing to identify the host pathogenicity of 36 Korean barley cultivars, a wheat cultivar, two rye cultivars, three Japanese barley cultivars and Chenopodium amaranticola. Viral sympoms of inoculated leaves appeared on moulted loaves about 4 to 6 weeks of inoculation. Baegdong and Tapgolbori, infected from Albori strain and Eunpamil strain infected from Samdobori showed much higher susceptibility than C. amaranticola and C. quinoa which showed ring spots and chlorotic spots respectively. Virus particles were observed by the electron microscope. They were rod-shapes, which are bipartite, of 142 nm or 281 nm in length with 20 nm diameter on infected leaves. Specific detection and identification of SbWMV was set up using the RT-PCR. PCR fragments of SbWMV(0.5kb) were obtained by using the designed primers for SbWMV RNA 2.

• Korean Journal of Plant Taxonomy
• /
• v.51 no.2
• /
• pp.115-132
• /
• 2021

Seven species and two varieties belonging to the genus Boehmeria Jacq. (Urticaceae) are known to be distributed in Korea. Among them, B. spicata, B. tricuspis, and B. tricuspis var. unicuspis were subjected to an external morphological study. Among the individuals believed to exhibit variations in the leaf shape, B. gracilis and B. silvestrii were newly recognized. Unlike related taxa, B. gracilis has middle leaves with an elliptic, broadly elliptic, ovate, or broadly depressed ovate shape, a regular and serrulate-dentate margin, and an unlobed and short caudate or cuspidate apex. Boehmeria silvestrii has middle leaves with 5-angled ovate, orbicular ovate or broadly ovate shapes, and 3- or 5-lobed and caudate apices. Therefore, we assigned the corresponding names 'Top-geo-buk-kko-ri' and 'Cham-geo-buk-kko-ri'. Meanwhile, the B. spicata complex (B. gracilis, B. silvestrii, B. spicata, and B. tricuspis var. unicuspis) is very closely related in terms of the morphological characters, whereas B. tricuspis exhibits no relationship. Furthermore, because the scientific name and type specimen of B. tricuspis var. unicuspis (Pul-geo-buk-kko-ri) are problematic, the correct name B. paraspicata Nakai and corresponding holotype are presented. Additionally, lectotypes of B. gracilis and B. silvestrii are newly designated here. A taxonomic treatment, descriptions, a key, photographs, type specimens, and leaf variation images of the B. spicata complex are provided in this study.

• Korean Journal of Plant Taxonomy
• /
• v.50 no.2
• /
• pp.232-238
• /
• 2020

The identity of Dioscorea coreana (Prain & Burkill) R. Kunth is recognized during the re-identification process of Korean Dioscorea specimens. Given the relatively few pieces of information, including few descriptions and research papers, this species has been misidentified as D. tokoro, which has a similar leaf shape, but D. coreana is distinguished from D. tokoro by the absence of a pedicel in the male flower, the green color of the tepal, and the shapes of the fruit and seed. Thus, detailed descriptions, illustrations, and photographs of D. coreana and a key to the Korean Dioscorea, including this species, are presented.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.17-22
• /
• 2008

Four kinds of leaves with different shapes of leaf blade were used as experimental materials to establish an optimum condition for treating leaves to obtain skeleton leaves. Effective concentration and length of soaking time in a hot NaOH solution, which resulted in high valued ornaments, were 60% (v/v) for 50 minutes for Acer buergerianum (palmatifid), 20% (v/v) for 50 minutes for Ilex cornuta (serrate), 20-60% (v/v) for 70 minutes for Quercus mongolia (lobed), and 20-40% (v/v) for 70 minutes for Quercus palustris (parted). Through a series of the process of soaking leaves in a hot NaOH solution, rinsing or brushing to remove mesophyll, drying, and dying, high quality ornaments could be obtained.