• 항공우주정책ㆍ법학회지
• /
• 제33권2호
• /
• pp.3-34
• /
• 2018

우리나라 항공운송산업은 1948년 10월에 대한국민항공사(KNA) 설립된 이후, 올해로 민항 70년의 역사를 이어 왔다. 현재 우리나라는 9개의 국제항공운송사업 면허를 보유한 항공사가 활발하게 사업을 영위하고 있으며, 2017년 기준으로 우리나라는 항공운송 수송실적(국내+국제)이 세계 8위를 차지할 정도로 세계 항공업계에서 그 위상을 확고히 하고 있다. 본고는 현재 우리나라 항공운송산업에 대한 분석을 통해 국내 항공운송산업의 내재적 문제점과 그에 대한 정책적 내지 법적으로 보완할 사항이 무엇인지에 대해 살펴보고, 향후 우리나라가 글로벌 항공 강국으로 지속 발전할 수 있는 '항공정책 방향'을 제시하는데 그 목적이 있다. 항공관련 통계자료를 분석해보면, 우리나라 항공운송산업은 매우 높은 성장률을 보이고 있으며, 국적항공사들도 지속성장을 위한 투자를 계속하고 있다. 나아가 새로운 기업들도 시장진입을 위해 노력하고 있다. 2018년 11월 현재 4개 기업이 국제항공운송사업 면허를 신청하였고, 1개 기업이 (화물)국제항공운송사업 면허를 신청한 상태이며 국토교통부는 2019년 1분기까지 면허발급 여부를 결정할 것으로 예상된다. 이러한 상황에 대해 일부에서는 경쟁촉진을 통한 가격인하와 소비자 편익 향상을 기대하고 있으나, 반대편에서는 경쟁심화로 인한 항공사의 재무구조 악화와 안전투자 소홀을 우려하기도 한다. 현재 상황에서 우리나라 항공운송산업의 문제점을 정리하면 첫째, 저비용항공사들이 내국인 수요 유치에 집중하는 반면 외국인 수요 유치에 대한 노력이 부족하여 장기적이고 지속적인 성장의 기반이 취약하며, 둘째, 최근 몇 년간의 고도성장에 따라 조종사, 정비사와 같은 항공 전문인력의 부족과 주요공항의 슬롯이 포화상태에 이르러 지속성장의 장애가 되고 있으며, 셋째, 항공사들의 재무건전성이 체계적이고 지속적으로 관리되지 않아서 급작스런 지정학적 리스크나 글로벌 경기 침체시에는 항공사들의 재무상태가 일시에 급격이 나빠지고, 그 피해는 고스란히 소비자들에게 귀결될 위험이 있다. 국적항공사들이 지속 발전하기 위해서는 첫째, 성장기반을 세계 항공시장의 무한한 수요에 초점을 맞추고 국제경쟁력을 갖추어 나가고, 둘째, 정부에서 항공 인프라를 항공운송산업 규모에 맞게 지원하여야 하며, 셋째, 우리나라 항공운송산업의 미래를 이끌어 나갈 항공 전문인력을 체계적으로 양성하고, 넷째, 정부는 상시적으로 항공사들의 재무상태를 관리하여 소비자의 피해를 미연에 방지해야 할 것이다. 현재 항공운송산업은 극심한 경쟁이 일상화 되어 있다. 국적항공사의 지속가능한 발전을 위해서는 항공사들이 모두 치열하게 노력해야 할 뿐만 아니라, 정부의 모든 기관들도 우리 항공사들이 국제경쟁에서 이길 수 있도록 정책적으로 뒷받침 해나가야 할 것이다.

• 한국대기환경학회지
• /
• 제8권4호
• /
• pp.221-228
• /
• 1992

In order to evaluate the degree of air pollution, soils from 125 and 60points of main streets of Seoul and Daejeon, respectively, were sampled and analyzed for the contents of lead, copper, iron and zinc by nitric acid($HNO_3$) extraction followed by atomic absorption spectrophotometry during June and September, 1990. The Pb contents of Seoul and Daejeon were 350.2$\mu$g/g and 175.9$\mu$g/g, respectively, which were 14.5times and 7.3times respectively higher than the control(24.0). In Seoul, the commercial area gave the highest value followed by resdential and industrial areas in the decreasing order, while the order in Daejeon was Industrial, commercial and residential areas. The Cu contents in Seoul and Daejeon were very similar(236.6 and 234.6, respectively) each other, and about 11times higher than the control(20.9). The concentration was highest in industrial, followed by commercial and the lowest in residential areas in Seoul, while the order in Daejeon was industrial, residential and commercial areas. The Fe contents were 25716.5 in Seoul and 22838.6 in Daejeon, both being similar to the control value(22537.0). The value was highest in industrial and next in commercial areas and the lowest in residential area both in Seoul and Daejeon. The Zn contents in Seoul and Daejeon were 728.2 and 404.0, respectively, wihch were 6.3 and 3.6times higher than the control(113.3). The value was highest in commercial and next in industrial areas and the lowest in residental area in Seoul, while the order was industrial, residential and commercial areas in Daejeon. The heavy metal content was higher in the soil of main streets than that of minor streets in Seoul. The content of lead in Seoul was higher in the streets of Chongro-ku(525.9) and Chung-ku(684.8), the central area of the city which had a heavy traffic, than those in Nowon-ku(320.3) and Kwanak-ku(312.6) which had relatively less traffic crowd. The similar pattern was observed in the content of zinc; it was higher in Chongro-ku(1305.0) and Chung-ku(1335.4) than in Nowon-ku(489.1) and Kwanak-ku(569.8). In Daejeon, the contents of lead and zinc were decreasing as the distance from Daejeon Railroad Station increased : they were respectively 157.8 and 447.7 within 2km from the station, 157.6 and 235.7 with in 2-4km, and 63.5 and 156.2 within 4-6km and 58.7 and 142.2 within 6-8km. In summary, the contents of lead, copper and zinc were generally higher in the central area of the city, areas of heavy traffic and areas of industry and commerce.

• 한국대기환경학회지
• /
• 제28권5호
• /
• pp.527-537
• /
• 2012

The increasing consumption of pseudo-petroleum products (PPP) has been disturbing the national petroleum market. The use of PPP lead to tax evasion, disturbance of sound trading principles, component corrosion of cars, and explosion accident. Also, PPP have emitted hazardous air pollutants (HAP) including the carcinogenic aromatic hydrocarbons, PAHs and aldehydes more than regular-petroleum products. It thus has potentials to cause many environmental and health care problems. In this study, benzene, toluene and xylene emissions from road transport vehicles due to the use of pseudo-gasoline are estimated for the year 2008. The results of our study provide emission estimates of benzene, toluene and xylene for the year as 405, 1,711, 717 tonne/yr, respectively for regular-gasoline. BTX emissions are calculated as 452~515, 1,882~2,264 and 732~752 tonne/yr when the amount of pseudo-gasoline is estimated to account for 6~13% for regular-gasoline consumption. BTX emissions increased as much as 12~27, 10~32, 2~5% by using pseudo-gasoline. It is found that the pseudo-gasoline should be the key component to produce HAP in urban area.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.826-831
• /
• 2004

Recently, studies have been carried out to develop unmanned Micro Air Vehicles(MAVs) that can search and monitor inside buildings during urban warfare or rescue operations in hazardous environments. However, existing fixed-wing and rotary-wing MAVs cannot travel at extremely low or high speeds, hover in place, or change directions instantly. This has lead researches to search for other flight methods that could overcome those drawbacks. Insect flight principles and its applications to MAVs are being studied as an alternative flight method. To take flight, insects flap and rotate their wings. These wing motions allow for high maneuverability flight such as hovering, vertical take off and landing, and quick acceleration and deceleration. This paper proposes a method for designing a mechanism that reproduces hovering insect flight, the basis for all other forms of insect flight. The design of a mechanism that can reproduce the motion that causes maximum lift is proposed, the required specifications are calculated, and a method for reproducing hovering insect flight with a single motor is presented. Also, feasibility of the design was confirmed by simulation.

• 한국대기환경학회지
• /
• 제5권1호
• /
• pp.1-10
• /
• 1989

The sensitivity analysis is a method to quantify to what extent the output of a model changes with the values of input parameters. This will lead to increase model accuracy through measurement validation. Three line source air quality models, HIWAY 2, PAL, and CALINE 3 were selected for this study. The input parameters analysed included wind speed, wind direction, stability, emission rate, mixing height, receptor distance, initial dispersion coefficient, surface roughness, and averaging time. It turned out that PAL model generally showed higher concentration than other two models, and that between CALINE 3 and HIWAY 2, CALINE 3 showed higher concentration than HIWAY 2 model near the line sources, but beyond a certain downwind distances HIWAY 2 model showed higher concentration. The modesl were very sensitive to wind speed especially in the range of 0 $\sim$ 1 m/s and to wind direction near the parallel wind to streets. In case of emission rate, the output concentration was directly proportional to these input parameters. And the sensitivity of the input parameters such as stability, mixing height, initial dispersion coefficient, surface roughness, and averaging time were not very significant.

• 설비공학논문집
• /
• 제17권1호
• /
• pp.16-24
• /
• 2005

The goal of the present paper is to show the optimum design and operation conditions on 6 kW solar water heating system by using computer simulation with verified modelling. As the object functions, we took not only the amount of acquired and auxiliary heat but LCC, which has a relative importance and decisive role in economy. As expected, the maximum heat is acquired at the slope of collector with the equal degree to the latitude, facing the south. The capacity increase of the circulation pump and the storage tank lead to the increase of acquired heat and the decrease of auxiliary heat, but do not necessarily give economical advantages owing to additional electrical power consumption. In the present system, the minimum LCC can be obtained at the storage tank volume of 450 L and the mass flow rate of 0.344 kg/s.

• 수산해양교육연구
• /
• 제9권1호
• /
• pp.83-97
• /
• 1997

Diesel engine is widely used for ship and industry source of power because of its high thermal efficiency and reliability and durability. However it lead to air pollution due to exhaust gas, and it is important to develop diesel engine of lower air-pollution to decrease the hazardous exhaust gas emissions. As one of the ways, the study for practically using the high pressure of fuel injection and variable injection timing system is being processing. The high pressure injection, which is said to be an effective means for reducing both NOx and particulate emissions, and great improvements in combustion characteristics have been reported by many researchers. In this study, electronic-hydraulic fuel injection system and hydraulic fuel injector system have been applied to the D.I. test engine for high pressure injection and variable injection timing. The injection pressure and injection rate depending upon accumulator pressure were measured with strain gage and Bosch injection rate measuring system before fitting the system into test engine, and analyzed the characteristics of the injection system. The combustion characteristics with this injection system has been analyzed with data concerning heat release rate, pressure rising rate, ignition point, ignition delay and maximum pressure value.

• 전기의세계
• /
• 제14권3호
• /
• pp.28-33
• /
• 1965

This experiment is based on "the feasible improvement studies for an eliminating device of the static electricity which applies the ionizing effect of beta radiation." In order to accomplish this object, the following problems were necessarily considered to investigate and to determine. The efficiency of the elimination of static electricity was determined by means of measuring the ion current between electrically charged plates with micro-ammeter. The effects of various factors, i.e., the distance between charged plate and radiation source, the activity of radiation source, the electric otential and the area of the charged plate, the shape of the source housing, the lining of backscattering material (Pb) on the source housing surface and blowing of ionized air, on the static electricity eliminating efficiency were studied. The beta radiation sources used in this experiment were S$^{35}$ and Sr$^{90}$ -Y$^{90}$ . It was revealed that ion current increased with source activity, the electric potential and area of the plates, the lead (Pb) lining on the surface of the source housing and the velocity of the ionized air blowing. As one could expect the S$^{35}$ was more effective to increase the ion current since it is known to be a higher specific ionization source than Sr$^{90}$ -Y$^{90}$ . The detailed result and performance of the eliminating device of the static electricity are described here.ibed here.

• 설비공학논문집
• /
• 제20권8호
• /
• pp.556-562
• /
• 2008

The building HVAC systems have very different qualities of performance and durability with the superintendent's ability for management and maintenance. The poor management of these systems finally lead to the shortening of the life expectancy and result in the increase of operating costs and energy consumptions due to low efficiencies. This study presents an example of appropriate use of the LCC(Life Cycle Cost) analysis in a process of maintaining and repairing old HVAC equipments, by demonstrating the difference of optimal economic life, decrease of running cost, and energy consumption according to the management level of the HVAC equipments. But there are no reliable life expectancy and performance history data at present for optimal management of various building service equipments. Therefore, it is necessary to construct long-term database on operation results of them for more accurate and optimized LCC analysis.

• 설비공학논문집
• /
• 제21권11호
• /
• pp.591-598
• /
• 2009

The service quality with the various building equipments tends to depend on the individual superintendent's capability and efforts generally and this often lead to poor maintenances and managements of them. N-BMS(Networked Building Management System), proposed in this study, is a new type of building management method, which links principal equipments within many buildings into a communication network and carries out several significant missions such as fault detection, deterioration diagnosis and control the equipments and so on, as well as monitoring which is the main and unique purpose of the conventional BMS. How to construct the N-BMS was considered to keep performance of equipments high and thus to save energy and resource. LCC(Life Cycle Cost) based analysis was also performed in order to verify the effects of some maintenance and management works for the building HVAC systems.